EP-TD-55 Acura Integra 1992-1995 Distributor (OEM 30100-PR4-A12 TD-55U TD-46U)

The EP-TD-55 is a complete TEC OBD1 distributor for Acura Integra 1.8L B18A/B18B (1992-1995). OEM 30100-PR4-A12 specification — distinct from TD-44 (30100-P72-006). Verify OEM before ordering. Ships with cap and rotor. Replaces 30100-PR4-A12 / TD-55U / TD-46U / Cardone 84-17406 / Dorman 690-109. ISO 9001:2015, CE-EMC, UL, UKCA certified. Ships with distributor cap and rotor included. EP (Ever-Power) is an ISO 9001:2015 certified manufacturer of automotive ignition components. CE-EMC, UL, and UKCA certified for compliance in all major export markets.

EP Aftermarket Ignition Distributor

EP-TD-55 — Ignition Distributor for Acura Integra 1992-1995 (TD-55 Replacement)

Acura Integra distributor · 1992-95 B18A B18B · Replaces 30100-PR4-A12 TD-55U TD-46U · TEC OBD1 · Cap rotor

ISO 9001:2015CE-EMCUKCAGlobal Export

Model

EP-TD-55

Type

TEC OBD1

App

Acura Integra 1992-95

OEM

30100-PR4-A12

Cardone

84-17406

Technical specifications

ParameterDetail
EP Model No.EP-TD-55
Product typeIgnition Distributor — Complete Assembly
Vehicle applicationAcura Integra 1.8L 1992-1995
EngineHonda B18A / B18B 1.8L DOHC 4-Cylinder
Distributor typeTEC — OBD1
IncludesDistributor body, cap, and rotor
Replaces OEM30100-PR4-A12 · TD-55U · TD-46U
Cardone84-17406 · Dorman 690-109
CertificationISO 9001:2015 · CE-EMC · UL · UKCA
BrandEP (Ever-Power)

The EP-TD-55 is a complete TEC OBD1 ignition distributor for the third-generation Acura Integra with the B18A or B18B 1.8L DOHC four-cylinder engine for 1992 through 1995. While the EP-TD-44 covers some Integra B18 applications, the TD-55 uses a different OEM reference (30100-PR4-A12 vs 30100-P72-006), indicating a separate distributor specification for certain Integra 92-95 variants.

The TD-55U and TD-46U identifiers both appear for this application, covering slightly different trim or production variants of the same Integra B18 OBD1 distributor. The Cardone 84-17406 with Dorman 690-109 are the standard aftermarket cross-references, confirming this as a distinct and separately available unit from the TD-44.

Ships complete with cap and rotor. Verify your Integra OEM distributor part number against 30100-PR4-A12 before ordering to confirm EP-TD-55 is the correct specification for your vehicle.

EP Honda distributor precision production

Key features

Acura Integra 1992-1995 B18 specific

Covers the B18A/B18B Integra with 30100-PR4-A12 OEM reference -- verify against existing distributor before ordering.

TD-55U and TD-46U covered

Both TEC distributor body identifiers covered by EP-TD-55.

Distinct from TD-44

TD-55 (30100-PR4-A12) is a separate specification from TD-44 (30100-P72-006). Both cover Integra 92-95 B18 but are different units.

Complete cap and rotor assembly

Ships with cap and rotor for direct installation.

Vehicle fitment

MakeModelYearsEngine
AcuraIntegra 1.8L LS/GS/RS1992-1995B18A/B18B OBD1

EP Honda distributor full series compatibility overview

Application scenarios

Acura Integra 92-95 PR4 spec service

Integra owners with 30100-PR4-A12 on their existing distributor use EP-TD-55 for the correct OBD1 TEC replacement.

Honda B-series ignition specialist supply

Parts distributors offer both EP-TD-44 and EP-TD-55 for complete Integra 92-95 B18 distributor coverage across both OEM specifications.

Third-gen Integra OBD1 parts

Third-gen Integra owners maintaining the B18 DOHC verify OEM spec and use EP-TD-55 for the PR4 specification distributor.

Installation guide

Verify OEM part number 30100-PR4-A12 on existing distributor before installing. Disconnect battery. Mark rotor and housing position. Disconnect both OBD1 connectors. Remove hold-down bolt. Install EP-TD-55 in same orientation. Reconnect connectors. Set base timing to 16 degrees BTDC with service check connector shorted.

Need pricing or technical assistance?

We respond within 24 hours · MOQ as low as 1 unit · OEM/private-label available

Quality assurance

Every EP Honda Distributor is manufactured under ISO 9001:2015 certified quality management. Each unit is tested for signal integrity, internal oil seal condition, and TEC or Hitachi-type cap/rotor interface before shipment. CE-EMC, UL, and UKCA certifications confirm compliance across all major export markets. Each unit ships complete with cap and rotor for direct OEM replacement installation.

EP ISO CE EMC UL UKCA certification

More EP HEI distributors

ModelApplicationEngine
EP-TD-01Honda Accord 1990-91 (TD-01)Honda/Acura
EP-TD-02Honda Civic/CRX 1990-91 (TD-02)Honda/Acura
EP-TD-03Acura Integra 1988-89 (TD-03)Honda/Acura
EP-TD-22Honda Civic/CRX 1988-91 (TD-22)Honda/Acura
EP-TD-23Acura Integra MT 1990-91 (TD-23)Honda/Acura
EP-TD-31Honda CRV 2.0L (TD-31)Honda/Acura
EP-TD-40Honda Civic 1.5L 92-95 variantHonda/Acura
EP-TD-41Honda Civic non-VTEC 1992-95Honda/Acura

About the manufacturer

EP (Ever-Power) — Automotive Ignition Specialist Since 1999

25+

Years in production

300+

Distributor models

80%

Export ratio

4

Certifications

HZPT is the international brand of Ningbo Xianlong Automobile Fittings Co., Ltd., established 1999. With over 25 years of automotive ignition distributor manufacturing experience, EP provides the aftermarket with reliable OEM-specification replacements for Honda and Acura vehicles. Our Honda Distributor catalog spans TD-series units for Civic, Accord, Prelude, Integra, and CRV, plus D4T and D6P Hitachi-type units for Odyssey, Civic, and Acura CL applications.

EP ignition distributor manufacturing facility

Every EP Honda distributor ships as a complete plug-and-play assembly with cap and rotor included. Each unit is built to the correct specification -- TEC or Hitachi type as applicable -- for the listed vehicle application. No additional ignition components are required for direct OEM replacement installation. EP is part of the Ever-Power Group, also producing PTO drive shafts and a comprehensive range of mechanical transmission products.

Frequently asked questions

What is the difference between a TEC and a Hitachi Honda distributor?
For most 1988-2000 Honda Civic and Accord models, Honda sourced distributors from two suppliers: TEC (Tokai Rika Electric) and Hitachi. The TEC and Hitachi distributors are NOT interchangeable -- they use different cap bolt patterns, different rotors, different internal components, and different external housing dimensions. You must replace your distributor with the same manufacturer type as the original. To identify your type, look for the letters TEC or the round Hitachi logo stamped on the side of your existing distributor housing. TD-series part numbers (TD-41, TD-42, TD-80, etc.) are typically TEC units. D4T and D6P prefix part numbers are Hitachi units.
What are the symptoms of a failing Honda distributor?
The most common Honda distributor failure symptoms include: intermittent no-start condition especially when the engine is hot (engine starts cold but fails to restart after reaching operating temperature -- a classic igniter failure pattern); rough or erratic idle; hesitation or stumbling under acceleration; a bouncing tachometer needle (classic sign of a failing igniter module); check engine light with OBD1 Code 9 (CYP sensor fault on 1992-1995 models) or OBD2 codes P0335/P0336 (CKP sensor), P1361/P1362 (TDC sensor), P1381/P1382 (CYP sensor), or P1399 (general misfire) on 1996-2000 models; and oil contamination inside the distributor cap (indicating failure of the internal shaft seal, part NOK BH3888E on TEC non-VTEC applications).
What is the difference between EP-TD-44 and EP-TD-55 for the Acura Integra 1992-1995?
Both EP-TD-44 and EP-TD-55 cover Acura Integra B18 DOHC 1992-1995, but they have different OEM part numbers: TD-44 uses 30100-P30-006 / 30100-P72-006, while TD-55 uses 30100-PR4-A12. This reflects different distributor specifications used across Integra trims or production runs. Always check the OEM number on your existing distributor housing and match it to the corresponding EP unit. If you see P72 or P30 prefix, order EP-TD-44. If you see PR4 prefix, order EP-TD-55.
How do I order EP-TD-55 for export or wholesale?
EP supports single-unit orders for market sampling, carton quantities for repair shops and parts counters, and container-volume wholesale orders. Standard production lead time is 15-30 days. OEM branding and private-label packaging are available for qualifying volumes. Contact our team via the inquiry form or WhatsApp for pricing and availability.

Ready to order EP HEI distributors?

300+ models · 65K coil · Brass terminals · Factory-direct pricing · Global export

Disclaimer: Honda, Acura, Isuzu, Cardone, Dorman, TEC, Hitachi, and other brand names and OEM part numbers are used for product compatibility reference only. EP (Ever-Power) products are high-quality aftermarket replacement parts and are not affiliated with Honda Motor Co. or its subsidiaries. Always verify fitment using the OEM part number on your existing distributor before ordering. All trademarks remain the property of their respective owners.

LMC

Additional information

Editd by

LMC

Product Quick Detail:

  • Standard and non-standard available
  • With high quality and competitive price
  • Prompt delivery
  • Packing as per customer’s demand.

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
product packages

en_USEnglish