EP-TD-55 Acura Integra 1992-1995 分电器(OEM 30100-PR4-A12 TD-55U TD-46U)
The EP-TD-55 is a complete TEC OBD1 distributor for Acura Integra 1.8L B18A/B18B (1992-1995). OEM 30100-PR4-A12 specification — distinct from TD-44 (30100-P72-006). Verify OEM before ordering. Ships with cap and rotor. Replaces 30100-PR4-A12 / TD-55U / TD-46U / Cardone 84-17406 / Dorman 690-109. ISO 9001:2015, CE-EMC, UL, UKCA certified. Ships with distributor cap and rotor included. EP (Ever-Power) is an ISO 9001:2015 certified manufacturer of automotive ignition components. CE-EMC, UL, and UKCA certified for compliance in all major export markets.
EP售后点火分配器
EP-TD-55 — Ignition Distributor for Acura Integra 1992-1995 (TD-55 Replacement)
Acura Integra distributor · 1992-95 B18A B18B · Replaces 30100-PR4-A12 TD-55U TD-46U · TEC OBD1 · Cap rotor
模型
EP-TD-55
类型
TEC OBD1
应用程序
Acura Integra 1992-95
OEM
30100-PR4-A12
Cardone
84-17406
技术规格
| 参数 | 细节 |
| EP 型号 | EP-TD-55 |
| 产品类别 | Ignition Distributor — Complete Assembly |
| 车辆应用 | Acura Integra 1.8L 1992-1995 |
| 引擎 | Honda B18A / B18B 1.8L DOHC 4-Cylinder |
| Distributor type | TEC — OBD1 |
| 包括 | Distributor body, cap, and rotor |
| 替换原厂配件 | 30100-PR4-A12 · TD-55U · TD-46U |
| Cardone | 84-17406 · Dorman 690-109 |
| 认证 | ISO 9001:2015 · CE-EMC · UL · UKCA |
| 品牌 | EP(永恒力量) |
The EP-TD-55 is a complete TEC OBD1 ignition distributor for the third-generation Acura Integra with the B18A or B18B 1.8L DOHC four-cylinder engine for 1992 through 1995. While the EP-TD-44 covers some Integra B18 applications, the TD-55 uses a different OEM reference (30100-PR4-A12 vs 30100-P72-006), indicating a separate distributor specification for certain Integra 92-95 variants.
The TD-55U and TD-46U identifiers both appear for this application, covering slightly different trim or production variants of the same Integra B18 OBD1 distributor. The Cardone 84-17406 with Dorman 690-109 are the standard aftermarket cross-references, confirming this as a distinct and separately available unit from the TD-44.
Ships complete with cap and rotor. Verify your Integra OEM distributor part number against 30100-PR4-A12 before ordering to confirm EP-TD-55 is the correct specification for your vehicle.

主要特点
Acura Integra 1992-1995 B18 specific
Covers the B18A/B18B Integra with 30100-PR4-A12 OEM reference -- verify against existing distributor before ordering.
TD-55U and TD-46U covered
Both TEC distributor body identifiers covered by EP-TD-55.
Distinct from TD-44
TD-55 (30100-PR4-A12) is a separate specification from TD-44 (30100-P72-006). Both cover Integra 92-95 B18 but are different units.
完整的分电器盖和分火头组件
Ships with cap and rotor for direct installation.
车辆适配性
| 制作 | 模型 | 年 | 引擎 |
| Acura | Integra 1.8L LS/GS/RS | 1992-1995 | B18A/B18B OBD1 |

应用场景
Acura Integra 92-95 PR4 spec service
Integra owners with 30100-PR4-A12 on their existing distributor use EP-TD-55 for the correct OBD1 TEC replacement.
Honda B-series ignition specialist supply
Parts distributors offer both EP-TD-44 and EP-TD-55 for complete Integra 92-95 B18 distributor coverage across both OEM specifications.
Third-gen Integra OBD1 parts
Third-gen Integra owners maintaining the B18 DOHC verify OEM spec and use EP-TD-55 for the PR4 specification distributor.
安装指南
Verify OEM part number 30100-PR4-A12 on existing distributor before installing. Disconnect battery. Mark rotor and housing position. Disconnect both OBD1 connectors. Remove hold-down bolt. Install EP-TD-55 in same orientation. Reconnect connectors. Set base timing to 16 degrees BTDC with service check connector shorted.
质量保证
Every EP Honda Distributor is manufactured under ISO 9001:2015 certified quality management. Each unit is tested for signal integrity, internal oil seal condition, and TEC or Hitachi-type cap/rotor interface before shipment. CE-EMC, UL, and UKCA certifications confirm compliance across all major export markets. Each unit ships complete with cap and rotor for direct OEM replacement installation.

更多EP HEI分销商
| 模型 | 应用 | 引擎 |
| EP-TD-01 | Honda Accord 1990-91 (TD-01) | Honda/Acura |
| EP-TD-02 | Honda Civic/CRX 1990-91 (TD-02) | Honda/Acura |
| EP-TD-03 | Acura Integra 1988-89 (TD-03) | Honda/Acura |
| EP-TD-22 | Honda Civic/CRX 1988-91 (TD-22) | Honda/Acura |
| EP-TD-23 | Acura Integra MT 1990-91 (TD-23) | Honda/Acura |
| EP-TD-31 | Honda CRV 2.0L (TD-31) | Honda/Acura |
| EP-TD-40 | Honda Civic 1.5L 92-95 variant | Honda/Acura |
| EP-TD-41 | Honda Civic non-VTEC 1992-95 | Honda/Acura |
关于制造商
EP(Ever-Power)——自1999年以来一直是汽车点火系统专家
25+
生产年限
300+
分销商模式
80%
出口比率
4
认证
HZPT is the international brand of Ningbo Xianlong Automobile Fittings Co., Ltd., established 1999. With over 25 years of automotive ignition distributor manufacturing experience, EP provides the aftermarket with reliable OEM-specification replacements for Honda and Acura vehicles. Our Honda Distributor catalog spans TD-series units for Civic, Accord, Prelude, Integra, and CRV, plus D4T and D6P Hitachi-type units for Odyssey, Civic, and Acura CL applications.

Every EP Honda distributor ships as a complete plug-and-play assembly with cap and rotor included. Each unit is built to the correct specification -- TEC or Hitachi type as applicable -- for the listed vehicle application. No additional ignition components are required for direct OEM replacement installation. EP is part of the 永能集团同时生产 PTO 驱动轴 以及一系列全面的机械传动产品。
常见问题解答
What is the difference between a TEC and a Hitachi Honda distributor?
What are the symptoms of a failing Honda distributor?
What is the difference between EP-TD-44 and EP-TD-55 for the Acura Integra 1992-1995?
How do I order EP-TD-55 for export or wholesale?
Disclaimer: Honda, Acura, Isuzu, Cardone, Dorman, TEC, Hitachi, and other brand names and OEM part numbers are used for product compatibility reference only. EP (Ever-Power) products are high-quality aftermarket replacement parts and are not affiliated with Honda Motor Co. or its subsidiaries. Always verify fitment using the OEM part number on your existing distributor before ordering. All trademarks remain the property of their respective owners.
伦敦地铁公司
其他信息
| 编辑 | 伦敦地铁公司 |
|---|
产品快速详细信息:
- 有标准的和非标准的
- 具有高质量和有竞争力的价格
- 及时交付
- 按照客户的要求进行包装。
我们承诺将以最优惠的价格提供高质量的中国产品!我们也接受关于产品的特殊订单。如果你对我们的产品感兴趣。请不要犹豫,让我们知道。我们很高兴给你详细的信息。我们承诺,我们的产品将是安全的,是在高品质和合理的价格。如果您对我们的产品感兴趣,请尽快与我们联系,我们真诚地期待您的合作。
我们的大部分产品都出口到欧洲或美洲,标准和非标准产品都有。我们可以根据你的图纸或样品进行生产。材料可以是标准的,也可以按照你的特殊要求。如果你选择我们,你就选择了可靠。

可用的材料
1.不锈钢:SS201, SS303, SS304, SS316, SS416, SS420
2.Steel:C45(K1045), C46(K1046),C20
3.黄铜:C36000(C26800),C37700(HPb59),C38500(HPb58),C27200(CuZn37),C28000(CuZn40)。
4.青铜:C51000、C52100、C54400等
5.铁:1213,12L14,1215
6.铝:Al6061, Al6063
7.根据您的要求进行OEM
表面处理
退火、自然光化、热处理、抛光、镀镍、镀铬、镀锌、黄色钝化、金色钝化、缎面、黑色表面油漆等。
处理方法
数控加工、冲、车、铣、钻、磨、拉、焊和装配
质量控制和证书
技术人员在生产中进行自我检查,在包装前由专业的质量检查员进行最后检查。
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
包装和交货时间
尺寸:图纸
木箱/集装箱和托盘,或按客户要求的规格。
15-25天样品。30-45天完成正式订单
港口:上海/宁波港






