The PTO drive shafts we manufacture consist of components of the highest quality, which are configured in such a way that they meet all the requirements perfectly. Our PTO shafts are suitable for a wide range of agricultural applications, from small and economical solutions used in standard applications to high-performance combinations that are designed for continuous use and need to provide the highest possible drive power. We offer different series for different applications.
What is a PTO Drive Shaft?
PTO drive shafts are mechanical components that are used in agricultural machinery. PTOs are typically used with agricultural gearboxes to drive implements such as rotary mowers, plows, snow blowers, and seeders. A PTO drive shaft is a shaft that transmits power from a power takeoff (PTO) to a piece of equipment. The PTO drive shaft is typically located between the engine and the equipment, and it may be either a single or a double shaft. The PTO drive shaft helps transmit power from the engine to the equipment, allowing the equipment to operate.
The shafts have a flange on one end that attaches to the PTO, and a splined or threaded shaft on the other end to attach to the implement. They are often made from steel or aluminum and are sometimes covered with a protective sheath to prevent damage to the shaft.
PTO drive shafts are subject to a great deal of wear and tear and must be able to withstand the high speeds and torque associated with PTOs. They must also be able to absorb shocks and vibrations, as well as resist corrosion. To meet these requirements, they are typically made from high-quality materials and are machined to very tight tolerances.
PTO Shafts for Sale
The Ever-power high-performance PTO drive shafts are the foremost drive shaft solution in the agriculture and lawn & turf industries. Our PTO driveshafts are complete assemblies from tractor to implement. They are designed for continuous heavy-duty all-purpose use and meet the requirements of large farms and contractors. The metric product line offering of PTO drive shafts meets and/or exceeds the quality of products currently offered by our competitors within a multitude of industries.
Working principle of PTO Shaft
The power takeoff shaft or PTO shaft is a shaft that transfers power from a tractor or other vehicle to an implement or other device. The PTO shaft is connected to the vehicle’s powertrain, typically via a clutch, and to the implement or device via a shaft or other connection. When the vehicle’s engine is running, power is transferred from the engine to the PTO shaft, which then transfers the power to the implement or device. This allows the vehicle to power the implement or device without having to drive it directly.
Advantages of PTO shaft
- Increased power output
A PTO shaft can transmit more power than a regular shaft because it is wider. This is because the power is distributed over a larger area.
- Increased efficiency
PTO shafts allow power to be transferred more efficiently between two machines, resulting in increased overall productivity.
- Increased versatility
PTO shafts can be used with various machines, making them a versatile tool for various applications.
- Increased durability
PTO shafts are made from high-quality materials and are designed to withstand heavy use, making them a long-lasting solution.
- Increased safety
PTO shafts are designed with safety, ensuring operators are protected from potential injury.
- Increased reliability
A PTO shaft is less likely to fail than a belt or chain drive because it has no moving parts.
- Increased power
A PTO shaft can transmit more power than a belt or chain drive.
- Increased efficiency
A PTO shaft is more efficient than a belt or chain drive because it does not lose power through friction.
Application of PTO Shaft
The PTO shaft is a critical component in any piece of equipment that uses power from a tractor. It is responsible for transferring power from the engine to the implement or machine. The PTO shaft must be the correct size and fit for the equipment it is being used in. There are a variety of different types of PTO shafts available, so it is important to select the right one for the application.
The PTO shaft is used in a variety of applications, including:
- Hay balers
- Post hole diggers
The PTO shaft is an essential piece of equipment for transferring power from the engine to the implement or machine. It is important to select the right shaft for the application, to ensure that it is the correct size and fit.
Why choose us?
We are a professional manufacturer of PTO shafts with years of experience in the field of agricultural machinery manufacturing and supply. Ever-Power offers agricultural and industrial equipment of high quality at an affordable price. In addition, we can provide OEM service. We have a strong R&D team, so we can develop new products according to your requirements. Contact us for more information if you are interested.
PTO Shaft Parts
How to Extend a PTO Shaft
You might be wondering how to extend your PTO shaft. Well, there are several ways to do this. It may even be possible to do it yourself! Here are a few tips. Make sure you follow the guidelines given by the manufacturer of your tractor PTO. You should also make sure to check the specs provided. To get the correct length, start by checking the part number. Usually, you can find the part number on the label on the shaft. For example, a complete PTO shaft is marked with a part number of 14006127. The serial number is one. You should know this number because it’s required to get the correct extension.
One way to increase the PTO shaft diameter is to buy an extension PTO adapter. Depending on the diameter of your PTO shaft, you can get one that can fit. Moreover, a durable one is recommended to increase the PTO shaft’s length. You can also choose a high-quality PTO adapter that fits your tractor’s yoke ends. Its yellow zinc plating ensures that it’ll be sturdy enough to withstand external forces. It will keep the linkage secure and prevent any unforeseen problems.
Another way to extend your PTO shaft is to use diesel fuel. This is useful if your half shaft is stuck. The diesel fuel will loosen the shaft’s longitudinal tension. If you can’t get it out on your own, you can try to use a hammer. In some cases, it may take a little more than that, but it is guaranteed to work. You should always apply grease afterward, just to be sure you’re doing it right.
What’s the difference between 540 and 1000 PTO Shaft?
When a PTO shaft is turning 540, the ratio must be adjusted (geared up or down) to meet the needs of the implement, which is usually higher RPM’s than that. Since 1000 RPM’s is almost double that of 540, there is less “”Gearing Up”” designed in the implement to do the job required.”
Ever-power is also one of the mature PTO shaft cover suppliers in China. Not only do we have PTO shafts for sale, but we provide a variety of PTO shafts parts, and accessories, including clutches, tubes, and yokes for tractors and implements, including an extensive range of PTO driveline. Request our PTO shaft products at the best rate possible.
PTO Shaft and Agricultural Gearbox
PTO shaft and agricultural gearbox play a vital role in agricultural operations and should be thoroughly inspected before use.
Agricultural equipment, especially tractors and implements, will eventually wear. Excessive angles in the PTO shaft can result in a damaged yoke. Insufficient lubrication can also result in excessive wear on telescoping tubing and shield bearings. It is also important to lubricate all of these parts at least once every eight hours. To help prevent excessive wear and tear on your agricultural gearbox, consider getting a new one.
The PTO shaft and the agricultural gearbox are made of two different types of materials. The domestic PTO shaft is usually made of metal, while the metric type is made of plastic and rubber. Domestic PTO shafts can come in many different shapes, including round, rectangle, and star. The metric ones, on the other hand, come in a football shape or a bell shape. They are designed to prevent excessive wear and tear and can also withstand pressure, impact, and tension.
A PTO shaft is a critical component of an agricultural tractor. They are responsible for converting engine energy into hydraulic pressure. This process makes it possible for tractors to pull heavy loads. If improperly maintained, a PTO shaft can become damaged or inoperable. Two types of PTO shafts are commonly found on tractors: transmission PTO. The transmission PTO is a direct connection with the transmission, which means it can’t be driven when the clutch is engaged.
Pole-Star 650 Tractor-Mounted 3-Pt Post Hole Digger W/Optional Auger Combos
Agricultural Tiller Blade
Agricultural Rotavator Blade
Lawn Mower Blade
Flail Mower Blade
Sweeps & Plough Points
U-Joints for Truck
U-Joints for DAF
U-Joints for BENZ
U-Joints for VOLVO
U-Joints for SCANIA
Car Unigersal Joint
Steering Joint Assembly
Pole-Star 1500 Heavy Duty 3-Point Post Hole Digger for Cat 1 & 2 Tractors
Post hole diggers
24″ DIAMETER HEAVY DUTY EARTH AUGER FOR POST HOLE DIGGER
CUTTING EDGE SET FOR HEAVY DUTY EARTH AUGERS
Request a free quote
Safety and working conditions
Ever-power has always considered safety to be one of the most important design and construction parameters for its products which are all built in full compliance with the international ISO standard and EU safety regulations. Information on safety and on correct final user’ s application of the PTO drive shaft are supplied in safety labels and in the “Use and Maintenance” Manual provided with all PTO drive shafts. It is the customer responsibility to inform Ever-power. about the Country to which the PTO drive shafts will be delivered,in order to provide them with the suitable Manuals and Labels.
Ensure that all driveline,tractor and implement shields are functional and in place before operation.Damaged or missing parts must be replaced with originalspar parts,correctly installed,before using the driveline.
The PTO drive shaft joint does not operate continuously with an angle close to 80°, but only for brief periods (steering).
DANGER!Rotating driveline-contact can cause death. Keep away! Do not wear loose clothing,jewelry,or hair that could become entangled with the driveline.
Never use the safety chains to support the driveline for storage. Always use the support on the implement.
Friction clutches may become hot dring use. Do not touch! Keep the area around the friction clutch clear of any material which could catch fire and avoid prolonged slipping.
Request For Quotation