EP-1635-4 Electronic Distributor for Chevrolet 4-Cylinder EFI Engine

The EP-1635-4 is a complete electronic distributor for Chevrolet 4-cylinder EFI engine applications — S10 pickup (2.5L Iron Duke), Cavalier (2.0L/2.2L), Corsica, and Beretta (1987-1994). Economical replacement for the compact GM 4-cylinder distributor. Verify OEM part number on existing distributor before ordering. Ships with cap and rotor. Compatible with factory ignition module. ISO 9001:2015, CE-EMC, UL, UKCA certified.

EP Aftermarket Ignition Distributor

EP-1635-4 — Electronic Distributor for Chevrolet 4-Cylinder EFI Engine Applications

GM EFI distributor · Chevrolet 4-cylinder EFI · S10 Cavalier Corsica Beretta · Replaces GM 4CYL EFI distributor · Cap rotor

ISO 9001:2015CE-EMCUKCAGlobal Export

Model

EP-1635-4

Type

EFI Electronic

Engine

4CYL EFI

Application

Chevy 4CYL Cars/Trucks

Note

Verify fitment

Technical specifications

ParameterDetail
EP Model No.EP-1635-4
Product typeElectronic Ignition Distributor — Complete Assembly
Vehicle applicationChevrolet 4-cylinder EFI engine applications -- S10 pickup, Cavalier, Corsica, Beretta
EngineGM 4-cylinder EFI engine variants
IncludesDistributor body, cap, rotor, and magnetic pickup
Replaces OEMVerify OEM number for your specific Chevrolet 4-cylinder application
NoteVerify make, model, year, and OEM part number before ordering
CertificationISO 9001:2015 · CE-EMC · UL · UKCA
BrandEP (Ever-Power)

The EP-1635-4 is an electronic distributor for Chevrolet 4-cylinder EFI engine applications. GM produced several 4-cylinder engines in this era across the S10 compact pickup, Cavalier, Corsica, and Beretta platforms -- most commonly the 2.5L Iron Duke (used in S10), the 2.0L (early Cavalier), and the 2.2L (later Cavalier, Corsica, Beretta). These engines used compact distributor configurations suited to the four-cylinder firing order and ignition timing requirements.

The 4-cylinder EFI distributor market is smaller than the V6 and V8 segments but serves a real population of still-active vehicles, particularly S10 trucks and Cavalier/Corsica units maintained as economical daily drivers or work vehicles. Verify the OEM part number on your specific Chevrolet 4-cylinder application before ordering to confirm EP-1635-4 is the correct unit.

Ships complete with distributor cap and rotor.

EP automotive ignition distributor precision production equipment

Key features

GM 4-cylinder EFI coverage

Covers the Chevrolet 4-cylinder EFI distributor applications in S10 pickup, Cavalier, Corsica, and Beretta platforms.

Complete cap and rotor assembly

Ships ready to install with cap and rotor.

Verify OEM before ordering

The 4-cylinder distributor application range requires OEM number verification for accurate fitment across the different Chevrolet 4-cylinder engines.

Economical compact car and truck service

Cost-effective distributor replacement for high-mileage S10 trucks and Cavalier/Corsica compact cars in daily service.

Vehicle fitment

MakeModelYearsEngine
ChevroletS10 Pickup1987-19932.5L 4-cylinder TBI
ChevroletCavalier1987-19942.0L / 2.2L 4-cylinder EFI
ChevroletCorsica / Beretta1987-19942.2L 4-cylinder EFI

EP GM distributor full series compatibility overview

Application scenarios

S10 4-cylinder fleet maintenance

Work truck operators running 4-cylinder S10 pickups for light duty use replace aging distributors with EP-1635-4.

Cavalier and Corsica economical service

Budget-minded owners of high-mileage Cavalier and Corsica use EP-1635-4 for economical distributor replacement.

GM 4CYL parts coverage

Parts suppliers serving the compact GM car and truck market include EP-1635-4 for 4-cylinder distributor coverage.

Installation guide

Verify the OEM part number on your existing 4-cylinder distributor and cross-reference with EP-1635-4 before ordering. Disconnect battery. The 4-cylinder distributor is compact and may require specific tool access depending on the vehicle. Mark rotor and housing positions. Remove old unit. Install EP-1635-4 in same orientation. Reconnect connectors. No timing adjustment required on EFI applications if installed correctly.

Need pricing or technical assistance?

We respond within 24 hours · MOQ as low as 1 unit · OEM/private-label available

Quality assurance

Every EP GM distributor is manufactured under ISO 9001:2015 certified quality management. Each unit is individually tested for cap-to-rotor alignment, pickup or optical sensor signal function, shaft seal integrity, and electrical connector specification before shipment. CE-EMC electromagnetic compatibility certification, UL listing, and UKCA conformity mark confirm compliance across all major export markets. Units ship complete with cap and rotor -- no additional components required for installation.

EP ISO 9001 CE EMC UL UKCA enterprise certifications

More EP HEI distributors

ModelApplicationEngine
EP-8381Chevy Camaro 5.7L 1992-94 Optispark BilletLT1 Billet
EP-83811Pontiac Firebird 5.7L 1993-94 Optispark BilletLT1 Billet
EP-1832Chevy Camaro/Corvette 5.7L 1992-94 OptisparkLT1 Standard
EP-1803Pontiac Firebird 5.7L 1993-94 OptisparkLT1 Standard
EP-1829Cadillac Escalade/Fleetwood 5.7LGM EFI V8
EP-1829ACadillac Escalade 5.7L / Chevy V8 VariantGM EFI V8
EP-1830Chevy GMC 5.0/5.7L V8 C1500 Blazer 1987-1995Core GM V8
EP-1830AChevy GMC 5.0/5.7L V8 VariantGM V8 Variant

About the manufacturer

EP (Ever-Power) — Automotive Ignition Specialist Since 1999

25+

Years in production

300+

Distributor models

80%

Export ratio

4

Certifications

Founded in 1999 in Ningbo, Zhejiang Province, EP produces over 300 distributor models covering classic and modern GM, Ford, Chrysler, and international applications. Our GM EFI Distributor range is engineered as a direct OEM replacement for the factory Delco units -- same external dimensions, same connector configuration, same cap and rotor interface -- with improvements in housing material and component quality that address the known failure modes of the original distributors.

EP ignition distributor manufacturing facility

Wholesale buyers, Amazon resellers, and automotive service chains source directly from our factory, accessing OEM-quality replacement distributors at factory-direct pricing. OEM branding and private-label packaging are available for qualifying order volumes. EP is part of the Ever-Power Group, also producing worm reducers and a comprehensive range of mechanical transmission products.

Frequently asked questions

What are the symptoms of a failing GM EFI distributor?
Common failure symptoms for GM EFI distributors of this era include intermittent no-start conditions, engine stalling at operating temperature, erratic idle quality, loss of power under acceleration, and check engine codes related to the distributor reference signal or cam position sensor. The Vortec-era distributors (1996-2002) are particularly known for plastic housing cracking or warping from heat cycling, which allows oil or coolant contamination of the optical or magnetic pickup sensor inside the housing. The LT1 Optispark distributors (1992-1994) are known for moisture infiltration that degrades the optical sensor window, typically producing a characteristic hard cold-start condition that improves as the engine warms up.
Does the EP-1635-4 ship with the cap, rotor, and all necessary sensors?
Yes. The EP-1635-4 ships as a complete plug-and-play assembly including the distributor body, distributor cap, rotor, and all internal sensors required for operation in the listed applications. For Optispark LT1 units, the optical sensor assembly is included as part of the complete distributor. For standard EFI units, the magnetic pickup and cam position reference sensor are integrated into the assembly. No additional ignition components are required beyond the standard ignition module and coil already present on your vehicle.
What Chevrolet 4-cylinder engines does the EP-1635-4 fit?
The EP-1635-4 covers Chevrolet 4-cylinder EFI distributor applications across the S10 pickup, Cavalier, Corsica, and Beretta platforms from the late 1980s through mid-1990s. The specific engines include the 2.5L Iron Duke 4-cylinder used in S10 trucks and the 2.0L/2.2L Family II engines used in Cavalier, Corsica, and Beretta. Verify the OEM distributor number from your existing unit before ordering to confirm fitment. If you need assistance identifying your specific application, contact us with the vehicle year, make, model, engine size, and the OEM number from your existing distributor.
Do I need to reset the timing after installing this distributor?
For most GM EFI applications of this era, the distributor does not require timing adjustment after replacement if the engine is set to top dead center (TDC) before the old distributor is removed and the new unit is installed in the same position. Most 1987-1995 GM TBI and EFI applications use a computer-controlled timing advance that does not require a timing light for replacement -- align the distributor housing marks and the rotor to the same position as the original unit. For 1992-1994 LT1 Optispark applications, the base timing is not adjustable in the field; the Optispark provides a crankshaft-referenced timing signal and the PCM controls all timing advance. Consult the factory service manual for your specific vehicle year and engine for the correct installation procedure.
How do I order the EP-1635-4 for export or wholesale?
EP supports single-unit orders for market sampling, carton quantities for repair shops and parts counters, and container-volume wholesale orders. Standard production lead time is 15-30 days. OEM branding and private-label packaging are available for qualifying volumes. Contact our team via the inquiry form or WhatsApp for pricing and availability.

Ready to order EP HEI distributors?

300+ models · 65K coil · Brass terminals · Factory-direct pricing · Global export

Disclaimer: Chevrolet, GMC, Pontiac, Buick, Cadillac, Isuzu, and other vehicle brand names and OEM part numbers are used for product compatibility reference only. EP (Ever-Power) products are high-quality aftermarket replacement parts and are not affiliated with original vehicle or component manufacturers. Always verify fitment using the OEM part number on your existing distributor before ordering. All trademarks remain the property of their respective owners.

LMC

Additional information

Editd by

LMC

Product Quick Detail:

  • Standard and non-standard available
  • With high quality and competitive price
  • Prompt delivery
  • Packing as per customer’s demand.

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
product packages

en_USEnglish