EP-10-6B HEI Distributor for Jeep AMC 292 V6 Engines (Replaces 5232527)

The EP-10-6B is a complete HEI ignition distributor for Jeep and AMC vehicles with the AMC 292 CID V6 engine, used in early Jeep Gladiator J-series trucks (1966-1971) and the original Wagoneer. The AMC 292 V6 is a rare engine with increasingly scarce original ignition parts; the EP-10-6B provides a modern electronic HEI alternative for this unusual application. Black cap, 65,000-volt coil, adjustable vacuum advance, complete assembly. Verify OEM 5232527 on existing distributor. Replaces OEM 5232527. ISO 9001:2015, CE-EMC, UL, UKCA certified.

EP Aftermarket Ignition Distributor

EP-10-6B — HEI Distributor for Jeep AMC 292 CID V6 Engine

HEI distributor · Black cap · Jeep AMC 292 V6 · 65,000V coil · Complete assembly

ISO 9001:2015CE-EMCUKCAGlobal Export

Model

EP-10-6B

Type

HEI

Engine

AMC 292 V6

Cap Color

Black

Coil

65,000 V

Technical specifications

ParameterDetail
EP Model No.EP-10-6B
Product typeHEI Ignition Distributor — Complete Assembly
Vehicle applicationJeep and AMC vehicles with 292 CID V6 engine
EngineAMC 292 CID V6
Replaces OEM5232527 / 3214572
IncludesDistributor Body, 65K Coil, Black Cap (brass terminals), Rotor, Module, Adjustable Vacuum Advance
CertificationISO 9001:2015 · CE-EMC · UL · UKCA
BrandEP (Ever-Power)

The EP-10-6B is an HEI distributor for Jeep and AMC vehicles equipped with the 292 cubic inch V6 engine. The AMC 292 V6 was used in the Jeep Gladiator J-series truck and early Wagoneer, representing an earlier era of Jeep powertrains before the AMC inline-six family became the standard. The 292 V6 is a relatively rare engine in today's collector market, and quality replacement ignition components have become increasingly difficult to source through conventional channels.

Converting the AMC 292 V6 to HEI ignition follows the same logic as other AMC conversions — stronger spark, simplified wiring, elimination of points adjustment — with the added benefit that the modern HEI electronics are more tolerant of the vibration and temperature extremes that early Jeep trucks routinely encountered in agricultural and light commercial service.

Manufactured under ISO 9001:2015 quality management with verification for AMC 292 V6 distributor specifications.

EP high-precision ignition distributor production equipment

Key features

AMC 292 V6 specific fitment

Designed for the less-common AMC 292 V6 used in early Jeep J-series trucks and Wagoneers.

Rare engine parts support

Quality HEI distributor for an engine type with increasingly scarce original replacement parts.

65K coil performance upgrade

Modern 65,000-volt coil replaces decades-old ignition components on these early Jeep trucks.

Black cap for utility appearance

Black cap suits the utility Jeep J-series truck aesthetic.

Vehicle fitment

MakeModelYearsEngine
JeepGladiator J-series Truck / Wagoneer1966-1971AMC 292 CID V6
AMCVarious passenger cars1966-1971AMC 292 CID V6

EP HEI distributor full series compatibility overview

Application scenarios

Early Wagoneer and J-series preservation

Owners of rare Jeep Wagoneers and J-series trucks with the 292 V6 appreciate EP's support for these unusual applications.

AMC specialty collector

AMC and early Jeep collectors maintaining original powertrains stock the EP-10-6B for reliable ignition in rarely-seen engine applications.

Specialty parts distributor

Parts suppliers serving early Jeep and AMC enthusiasts carry the EP-10-6B to fill the gap left by discontinued OEM parts.

Installation guide

Standard AMC V6 HEI installation. Disconnect battery, mark positions, remove old unit, lower EP-10-6B, connect BAT wire and vacuum advance, set timing. Verify the 292 V6 firing order and timing specification for your specific application year. Approximately 30-45 minutes.

Need pricing or technical assistance?

We respond within 24 hours · MOQ as low as 1 unit · OEM/private-label available

Quality assurance

Every EP HEI distributor is manufactured under ISO 9001:2015 certified quality management. Each unit is individually tested for ignition coil output voltage, electronic module switching function, vacuum advance response, and shaft seal integrity before shipment. CE-EMC electromagnetic compatibility certification, UL listing, and UKCA conformity mark ensure full compliance across all major global export markets.

EP ISO 9001 CE EMC UL UKCA certifications

More EP HEI distributors

ModelApplicationEngine
EP-10AJeep AMC V8 290-401AMC V8 290-401
EP-10CChevy SBC 262-400 / BBC 396-454SBC/BBC V8 Red
EP-10Chevy SBC 262-400 / BBC 396-454SBC/BBC V8 Blue
EP-10BKChevy SBC 262-400 / BBC 396-454SBC/BBC V8 Black
EP-10-V6Chevy/Buick/Olds/Pont V6GM V6 229/262
EP-10TBChevy Corvette Tach DriveSBC/BBC Tach
EP-302HEA-1Ford 289-302 5.0 V8Ford SBF Blue
EP-302HEA-2Ford 351 Windsor V8Ford 351W Blue

About the manufacturer

EP (Ever-Power) — Automotive Ignition Specialist Since 1999

25+

Years in production

300+

Distributor models

80%

Export ratio

4

Certifications

Founded in 1999 in Ningbo, Zhejiang Province, HZPT operates automated and semi-automated production lines for ignition distributors, oil pump motors, and automotive electrical components. Our facility has received ISO9001:2015, CE-EMC, UL, and UKCA certifications, and our products are supplied to OEM customers in China and exported to the international aftermarket.

EP ignition distributor production line

Our HEI distributor range now covers 29 models across American V8, V6, and Flathead applications. Wholesale buyers, Amazon sellers, and aftermarket distributors source directly from our factory, eliminating the middleman markup that inflates the price of name-brand HEI distributors. EP is part of the Ever-Power Group, also producing sprockets and a comprehensive range of mechanical transmission products.

Frequently asked questions

What are the symptoms of a failing HEI distributor?
Common symptoms include hard starting, engine misfires at high RPM, rough idle, loss of power under load, and occasional stalling. A failing HEI module (the most common failure component) typically causes complete spark loss when hot — the engine starts fine when cold, stalls after reaching operating temperature, and may restart after a cool-down period. A worn HEI cap with carbon tracking between towers causes crossfire and cylinder-specific misfires that worsen as the cap deteriorates.
Does the EP-10-6B come with a cap, rotor, and coil?
Yes. The EP-10-6B ships as a complete ready-to-run assembly including the distributor housing, 65,000-volt high-output ignition coil, distributor cap with brass terminals, rotor, ignition module, adjustable vacuum advance canister, and hold-down hardware. No additional ignition components are required for installation.
Is the AMC 292 V6 distributor interchangeable with the 258 inline-six unit?
No. The AMC 292 V6 and the 258 inline-six have different block architectures and different distributor drive configurations. The EP-10-6B for the 292 V6 is not interchangeable with the EP-10-6A for the 258 I6. Verify your engine designation from the VIN or casting numbers before ordering.
Is the EP HEI distributor compatible with aftermarket ignition boxes such as MSD?
EP HEI distributors with a magnetic pickup (Ready-to-Run style) are compatible with external ignition boxes including MSD 6-series, 7-series, and 8-series units, as well as equivalent ignition boxes from Mallory, Crane, and Holley. Standard HEI distributors with an internal module operate as standalone units and do not require an external ignition box, though they can be paired with one for additional timing control. Consult the ignition box manufacturer's instructions for the correct connection procedure.
How do I order the EP-10-6B for export or wholesale?
EP supports single-unit orders for market sampling, carton quantities for repair shops, and container-volume wholesale orders. Standard production lead time is 15-30 days. OEM branding, private-label packaging, and custom color selection are available for qualifying volumes. Contact our team via the inquiry form or WhatsApp for pricing and availability.

Ready to order EP HEI distributors?

300+ models · 65K coil · Brass terminals · Factory-direct pricing · Global export

Disclaimer: Chevrolet, Ford, Pontiac, Oldsmobile, Buick, Cadillac, Chrysler, Dodge, Plymouth, Jeep, AMC, Holden, Volkswagen, and other vehicle brand names and OEM part numbers are used for product compatibility reference only. EP (Ever-Power) products are high-quality aftermarket replacement parts and are not affiliated with original vehicle or component manufacturers. All trademarks remain the property of their respective owners.

LMC

Additional information

Editd by

LMC

Product Quick Detail:

  • Standard and non-standard available
  • With high quality and competitive price
  • Prompt delivery
  • Packing as per customer’s demand.

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
product packages

en_USEnglish