Planetary Gear Transmission
In an epicyclic or planetary gear train, several spur gears distributed evenly around the circumference run between a gear with internal teeth and a gear with external teeth on a concentric orbit. The circulation of the spur gear takes place in analogy to the orbiting of the planets in the solar…
In an epicyclic or planetary gear train, several spur gears distributed evenly around the circumference run between a gear with internal teeth and a gear with external teeth on a concentric orbit. The circulation of the spur gear takes place in analogy to the orbiting of the planets in the solar system. This is how planetary gears acquired their name.
The components of a planetary gear train can be divided into four main constituents.
The housing with integrated internal teeth is known as a ring gear. In the majority of cases the housing is fixed. The driving sun pinion is in the center of the ring gear, and is coaxially arranged in relation to the output. The sun pinion is usually attached to a clamping system in order to provide the mechanical connection to the motor shaft. During operation, the planetary gears, which are mounted on a planetary carrier, roll between the sun pinion and the ring gear. The planetary carrier also represents the output shaft of the gearbox.
The sole purpose of the planetary gears is to transfer the required torque. The number of teeth has no effect on the transmission ratio of the gearbox. The number of planets can also vary. As the number of planetary gears increases, the distribution of the load increases and therefore the torque that can be transmitted. Increasing the number of tooth engagements also reduces the rolling power. Since only part of the total output has to be transmitted as rolling power, a planetary gear is extremely efficient. The advantage of a planetary gear compared to a single spur gear lies in this load distribution. It is therefore possible to transmit high torques wit
h high efficiency with a compact design using planetary gears.
Provided that the ring gear has a constant size, different ratios can be realized by varying the number of teeth of the sun gear and the number of teeth of the planetary gears. The smaller the sun gear, the greater the ratio. Technically, a meaningful ratio range for a planetary stage is approx. 3:1 to 10:1, since the planetary gears and the sun gear are extremely small above and below these ratios. Higher ratios can be obtained by connecting several planetary stages in series in the same ring gear. In this case, we speak of multi-stage gearboxes.
With planetary gearboxes the speeds and torques can be overlaid by having a ring gear that is not fixed but is driven in any direction of rotation. It is also possible to fix the drive shaft in order to pick up the torque via the ring gear. Planetary gearboxes have become extremely important in many areas of mechanical engineering.
They have become particularly well established in areas where high output levels and fast speeds must be transmitted with favorable mass inertia ratio adaptation. High transmission ratios can also easily be achieved with planetary gearboxes. Because of their positive properties and compact design, the gearboxes have many potential uses in industrial applications.
The advantages of planetary gearboxes:
Coaxial arrangement of input shaft and output shaft
Load distribution to several planetary gears
High efficiency due to low rolling power
Almost unlimited transmission ratio options due to combination of several planet stages
Suitable as planetary switching gear due to fixing this or that part of the gearbox
Possibility of use as overriding gearbox
Favorable volume output
Suitability for a wide range of applications
Epicyclic gearbox is an automatic type gearbox in which parallel shafts and gears arrangement from manual gear box are replaced with more compact and more reliable sun and planetary type of gears arrangement and also the manual clutch from manual power train is replaced with hydro coupled clutch or torque convertor which in turn made the transmission automatic.
The idea of epicyclic gear box is taken from the solar system which is considered to the perfect arrangement of objects.
The epicyclic gearbox usually comes with the P N R D S (Parking, Neutral, Reverse, Drive, Sport) modes which is obtained by fixing of sun and planetary gears according to the need of the drive.
Product Quick Detail:
- Standard and non-standard available
- With high quality and competitive price
- Prompt delivery
- Packing as per customer’s demand.
We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.
Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.
1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.
CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
QC & Certificate
Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
Package & Lead Time
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
Q: Are you trading company or manufacturer ?
A: Our group consists in 3 factories and 2 abroad sales corporations.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How long is your delivery time ? What is your terms of payment ?
A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shipment.
Q: What is the exact MOQ or price for your product ?
A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.