Kafuter K-9111 Repair Epoxy Putty/Epoxy Adhesive for Iron Casting

All the content of this page is from the Internet, and it is only for reference for product selection. Our products are replacement parts and not original spare parts. We are not the holder of the original trademarks mentioned in the content. Our replacement parts are perfectly suitable for the original spare parts. If you need to buy original spare parts, please contact the original factory for purchase. If you want to buy original spare parts, please contact the original supplier for purchase.

Kafuter K-9111 Repair Epoxy Putty/Epoxy Adhesive for Iron Casting

Kafuter K-9111 Repair Epoxy Putty/Epoxy Adhesive for Iron Casting is a two-part, gel formulation epoxy that is abrasion and corrosion resistant with good mechanical properties. It is specifically designed for use in nodular iron and grey iron castings. This repair epoxy putty provides excellent adhesion and can be used to repair air holes, sand holes, shrinkage, and cracking in iron castings.

Main Characteristics:

• Model: K-9111
• Color: Grey
• Density: 1.62 g/cm^3
• Compressive Strength: 88.0 Mpa
• Tensile Strength: 30.5 Mpa
• Shear Strength: 23.4 Mpa
• Bending Strength: 55.6 Mpa
• Hardness (shore A): 82 Mpa
• Working Temperature: -60~150°C

Applications:

Kafuter K-9111 Repair Epoxy Putty/Epoxy Adhesive is mainly used for filling air holes and sand holes, sealing cracks, and patching non-structural defects in iron castings. It is commonly used in construction, transportation, lighting, electronics, and outdoor applications.

Directions:

1. Surface Cleaning: Remove oil and grease from the surface, and abrasive and polish the area.
2. Mixing: Mix and forge the two parts of the epoxy putty in equal ratio. It will form a gel formulation at low temperature and can change into a soft gel when heated.
3. Coating: Apply a thin layer of the epoxy putty to the surfaces and push it into the gap to fill it completely.
4. Curing: If the room temperature is below 10°C, allow the epoxy putty to cure at room temperature for 1-2 hours. Then, use a heat producer such as an infra-red lamp or electric stove to heat the epoxy putty at 80°C for 3-4 hours, maintaining a distance of 300-400mm between the parts. Small-area fittings can be heated in an oven below 80°C.
5. Post-Processing: After the epoxy putty has cured for some time, it can be processed by ordinary methods. Wait for 18 hours before using a machine for further processing.

Packing: 500g/pairs

For more information and to purchase our other quality products, EVER-POWER GROUP mainly supplies various Cast Iron used in industry, such as Grey Cast Iron, Ductile Cast Iron, Alloy Steel Casting, Stainless Steel Casting, Carbon Steel Casting, Corrosion Resistant Steel Casting, Aluminum Pressure Die Casting, Aluminum Gravity Die Casting, Aluminum Sand Casting, Aluminium Alloy Casting, Refractory Steel Casting, Copper alloy casting, Zinc alloy casting, Sand Casting, Green Sand Casting, and more. We offer high-quality products, favorable prices, and considerate service. We welcome customers to come with drawings or samples for customization.

FAQ:

1. What is Kafuter K-9111 Repair Epoxy Putty/Epoxy Adhesive used for?
2. What are the main characteristics of Kafuter K-9111 Repair Epoxy Putty/Epoxy Adhesive?
3. How should I clean the surface before applying the epoxy putty?
4. Can I heat the epoxy putty with an open fire?
5. How long should I wait before processing the epoxy putty?