Hydraulic PTO Drive Gearbox Speed Increaser for Tractor

Hydraulic PTO Drive Gearbox Speed Increaser

Category: Tag:

Speed Increaser PTO gearbox

Speed Increaser PTO gearbox

Aluminum or cast iron housing
Connection for the hydraulic pump to tractor
540 or 1000 RPM input speed
Male or quick disconnect input shaft
Double input of splitter boxes

Series available:60001,60002,60003,60004,70001,70002,70003,70004,70005,70006,70007,70007-4/24

The Gearboxes are designed for connecting gear pumps to farm tractor power take-offs (PTO). The output speed of power take-offs is 540rpm which can be compared with the proper running speeds of hydraulic pumps. Different input running speeds can also be suitable, provided that the gearbox output speed does not exceed 3000 rpm.

Speed Increaser PTO gearbox

Housing Made in shell-cast aluminum or in high mechanical resistance cast iron.
Gears Made in Steel UNI 18 PCR M03.Stub teeth guarantee very high resistance and run very quietly.
Shafts Made in steel UNI 16 CRN4.They are coupled with gears via splined parts and are thus more suitable to stand the torques stated in the catalog.
Torques The torque figures mentioned in the technical charts of all the PTO Gearboxes refer to continuous duty cycles. Torques under intermittent working conditions can be exceeded by 20%.
Lubrication gear oil must be put in the PTO gearbox prior to use-please note we do not supply the gear oil and will not accept responsibility for customers not putting oil in. Change the oil after the first 60-80 hours and then every 12 months or 1500 hours whichever falls first.
Maintenance Please check the oil level via the special oil window every 50 hours. Working temperatures should not exceed 120 degrees Celcius under a continuous duty cycle.
Pump assembly Pump assembly requires a half-coupling and a fitting flange according to specific requirements when ordering please specify flange and pump shaft type. Contact our technical staff when installing special pumps.

Speed Increaser PTO gearbox


The gearbox series are used mainly for connecting hydraulic pumps to the power take-offs of agricultural tractors. PTO output, standardized at either 540 or 1,000 rpm, is, in this way, increased to optimum operating speeds for the hydraulic pumps. RD series of gearboxes are used to reduce hydraulic motor speed.

ML and B series gearboxes provide the connection for hydraulic pumps to low-speed tractor power take-off. The standard power take-off speed of 540 rpm, is increased by the gearbox ratio to optimal speed conditions required for the pump. Different inputs are accepted under the condition that the output speeds don’t go over 3000 rpm.

Speed Increaser PTO gearbox

Speed Increaser PTO gearbox


Application of Hydraulic PTO Speed Increaser

This new P.T.O (Power Take Off) consists of a 3:1 step-up gearbox and a hydraulic gear pump. It is ideal for adding hydraulic power to tractors and landscape equipment that are not already equipped with hydraulic circuits.

Used to power hydraulic augers, front-end loaders, lawnmowers, rotary sweepers, post hole drills, and post drives. These gearboxes are mainly used to connect the power take-off shaft at the rear of the tractor to drive the hydraulic pump to generate fluid power.

Other Related Agricultural Gearboxes

If you are interested, you can click the picture to learn about many agricultural machinery gearboxes

Speed Increaser PTO gearbox

We also have other agricultural machinery accessories, you can buy them all in one-stop

Speed Increaser PTO gearbox


Our Production Workshop of Gearboxes

Ever-power group focuses on the R&D, production, and sales of hydraulic and transmission parts. Since 2013, it has been producing speed increaser PTO gearboxes, which are mainly exported to European markets, such as France, Germany, Turkey, the United Kingdom..., and more than 15 countries.

With our resources in the field of hydraulics and agricultural machinery, we also distribute gear pumps, tractor machinery, dump truck pumps... From selected quality suppliers in China, orders in combination with gearboxes will enjoy special discounts after discussion .

Speed Increaser PTO gearbox

Product Quick Detail:

  • Standard and non-standard available
  • With high quality and competitive price
  • Prompt delivery
  • Packing as per customer’s demand.

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
product packages