トラクター用油圧PTOドライブギアボックス増速機

Hydraulic PTO Drive Gearbox Speed Increaser

スピードインクリメントPTOギアボックス

スピードインクリメントPTOギアボックス

Aluminum or cast iron housing
Connection for the hydraulic pump to tractor
540 or 1000 RPM input speed
Male or quick disconnect input shaft
Double input of splitter boxes

Series available:60001,60002,60003,60004,70001,70002,70003,70004,70005,70006,70007,70007-4/24

The Gearboxes are designed for connecting gear pumps to farm tractor power take-offs (PTO). The output speed of power take-offs is 540rpm which can be compared with the proper running speeds of hydraulic pumps. Different input running speeds can also be suitable, provided that the gearbox output speed does not exceed 3000 rpm.

スピードインクリメントPTOギアボックス

住宅Made in shell-cast aluminum or in high mechanical resistance cast iron.
ギアMade in Steel UNI 18 PCR M03.Stub teeth guarantee very high resistance and run very quietly.
シャフトMade in steel UNI 16 CRN4.They are coupled with gears via splined parts and are thus more suitable to stand the torques stated in the catalog.
TorquesThe torque figures mentioned in the technical charts of all the PTO Gearboxes refer to continuous duty cycles. Torques under intermittent working conditions can be exceeded by 20%.
潤滑gear oil must be put in the PTO gearbox prior to use-please note we do not supply the gear oil and will not accept responsibility for customers not putting oil in. Change the oil after the first 60-80 hours and then every 12 months or 1500 hours whichever falls first.
メンテナンスPlease check the oil level via the special oil window every 50 hours. Working temperatures should not exceed 120 degrees Celcius under a continuous duty cycle.
Pump assemblyPump assembly requires a half-coupling and a fitting flange according to specific requirements when ordering please specify flange and pump shaft type. Contact our technical staff when installing special pumps.

スピードインクリメントPTOギアボックス

P.T.O TRACTOR GEARBOXES

The gearbox series are used mainly for connecting hydraulic pumps to the power take-offs of agricultural tractors. PTO output, standardized at either 540 or 1,000 rpm, is, in this way, increased to optimum operating speeds for the hydraulic pumps. RD series of gearboxes are used to reduce hydraulic motor speed.

ML and B series gearboxes provide the connection for hydraulic pumps to low-speed tractor power take-off. The standard power take-off speed of 540 rpm, is increased by the gearbox ratio to optimal speed conditions required for the pump. Different inputs are accepted under the condition that the output speeds don’t go over 3000 rpm.

スピードインクリメントPTOギアボックス

スピードインクリメントPTOギアボックス

 

Application of Hydraulic PTO Speed Increaser

This new P.T.O (Power Take Off) consists of a 3:1 step-up gearbox and a hydraulic gear pump. It is ideal for adding hydraulic power to tractors and landscape equipment that are not already equipped with hydraulic circuits.

Used to power hydraulic augers, front-end loaders, lawnmowers, rotary sweepers, post hole drills, and post drives. These gearboxes are mainly used to connect the power take-off shaft at the rear of the tractor to drive the hydraulic pump to generate fluid power.

Other Related Agricultural Gearboxes

If you are interested, you can click the picture to learn about many agricultural machinery gearboxes

スピードインクリメントPTOギアボックス

We also have other agricultural machinery accessories, you can buy them all in one-stop

スピードインクリメントPTOギアボックス

 

Our Production Workshop of Gearboxes

Ever-power group focuses on the R&D, production, and sales of hydraulic and transmission parts. Since 2013, it has been producing speed increaser PTO gearboxes, which are mainly exported to European markets, such as France, Germany, Turkey, the United Kingdom..., and more than 15 countries.

With our resources in the field of hydraulics and agricultural machinery, we also distribute gear pumps, tractor machinery, dump truck pumps... From selected quality suppliers in China, orders in combination with gearboxes will enjoy special discounts after discussion .

スピードインクリメントPTOギアボックス

製品クイック詳細:

  • 標準と非標準がある
  • 高品質と競争力のある価格で
  • 迅速な配達
  • 顧客の要求によるパッキング。

私たちは、最高級のオンタイムデリバリーをお約束 陶磁器のプロンプトが表示さに裏打ちされ、慎重アフターサービス!私達はまたプロダクトについての特別注文を受け入れます。私達のプロダクトに興味があったら。我々は高品質の製品と価格競争力とあなたのためのオンタイムデリバリーをお約束いたします。私たちは、お客様との長期ビジネスを確立されています。私達のプロダクトの何れかのモデルに興味がある場合は、お問い合わせは、自由にしてくださいを参照してください。私達のプロダクトに興味があったら、私達にasap.We連絡しなさい誠意をこめてあなたの協同を捜している。

私達のプロダクトの何れかのモデルに興味がある場合は、お問い合わせは、自由にしてくださいを参照してください。私達はあなたのデッサンかサンプルによって作り出してもいいです。材料はあなたの特別な要求によって標準的またはである場合もあります。私達を選べば、信頼できる選びます。

品質報告書

材料あり

1.ステンレス鋼:SS201、SS303、SS304、SS316、SS416、SS420
2.Steel:C45(K1045), C46(K1046),C20
3.黄銅:C36000( C26800)、C37700( HPb59)、C38500( HPb58)、C27200(CuZn37)、C28000(CuZn40)
4.ブロンズ:C51000、C52100、C54400など
5.鉄:1213、12L14、1215
6.アルミニウムAl6061、Al6063
あなたの要求に従う7.OEM
利用可能な製品材料

表面処理

アニール、自然公準化、熱処理、研磨、ニッケルめっき、クロムめっき、亜鉛めっき、黄色不動態化、金不動態化、サテン、黒色表面塗装など。

加工方法

CNC加工、パンチ、旋盤、フライス、ドリル、研削、ブローチ、溶接、組立
製品仕上げ

QCと証明書

専門の質の検査官によるパッケージの前の生産、最終点検の技術者の自己点検
ISO9001:2008、ISO14001:2001、ISO/TS 16949:2009

パッケージとリードタイム

サイズ図面
木製ケース/コンテナとパレット、またはカスタマイズされた仕様に従って。
15-25days サンプル。30-45days offcial 順序
港: 上海/寧波港
製品パッケージ

jaJapanese