EP-1639A Electronic Distributor for Chevrolet Astro Van 4.3L V6 — Variant (Replaces 10496786)

The EP-1639A is a complete electronic distributor for Chevrolet Astro van and GMC Safari with the 4.3L V6 TBI engine (1987-1995) — variant configuration of EP-1639. Verify OEM 10496786 or 10467353 before ordering; use EP-1639 for OEM 1103884. High-mileage rear-wheel-drive van fleet replacement. Ships with cap and rotor. Fits both Chevrolet Astro and GMC Safari 4.3L V6 applications. Replaces OEM 10496786 / 10467353 / 19052845 / DST1639A. ISO 9001:2015, CE-EMC, UL, UKCA certified.

EP Aftermarket Ignition Distributor

EP-1639A — Electronic Distributor for Chevrolet Astro Van 4.3L V6 -- Variant Configuration

GM EFI distributor · Chevrolet Astro 4.3L V6 variant · Astro van minivan · Replaces 10496786 1103884 · Cap rotor included

ISO 9001:2015CE-EMCUKCAGlobal Export

Model

EP-1639A

Type

EFI Electronic

Engine

4.3L V6

Application

Astro Van

OEM

10496786

Technical specifications

ParameterDetail
EP Model No.EP-1639A
Product typeElectronic Ignition Distributor — Complete Assembly (Variant Configuration)
Vehicle applicationChevrolet Astro Van 4.3L V6 — variant configuration
EngineGM 4.3L (262 CID) V6 TBI/EFI
NoteVariant of EP-1639 -- verify OEM number before ordering
IncludesDistributor body, cap, rotor, and pickup sensor
Replaces OEM10496786 · 10467353 · 19052845 · DST1639A · 84-1639A
CertificationISO 9001:2015 · CE-EMC · UL · UKCA
BrandEP (Ever-Power)

The EP-1639A is a variant-configuration electronic distributor for the Chevrolet Astro and GMC Safari van equipped with the 4.3L V6 TBI engine. The Astro/Safari was the most popular mid-size passenger van in the US throughout the late 1980s and 1990s, and the 4.3L V6 in rear-wheel-drive configuration accumulated substantial mileage in both family and light commercial service. Distributor replacement is a routine service item on these high-mileage vehicles.

The 'A' suffix on EP-1639A designates a connector or housing variant within the GM 4.3L V6 distributor family. The Chevrolet Astro and GMC Safari van may use either the EP-1639 or EP-1639A configuration depending on the production year and engine management specification. Verify the OEM part number on your existing distributor (10496786 or 10467353 for EP-1639A) before ordering.

Ships complete with distributor cap and rotor.

EP automotive ignition distributor precision production equipment

Key features

Chevy Astro / GMC Safari van 4.3L coverage

Covers the rear-wheel-drive Astro and Safari van 4.3L V6 TBI applications across the 1987-1995 production run.

Variant configuration -- verify OEM number

The 'A' variant differs from EP-1639 in connector or housing specification. Check OEM 10496786 or 10467353 before ordering.

High-mileage van fleet service

Astro and Safari vans used in family and light commercial service accumulate high mileage; distributor replacement is a routine maintenance item.

Complete assembly with cap and rotor

Ships ready to install with cap and rotor.

Vehicle fitment

MakeModelYearsEngine
ChevroletAstro Van1987-19954.3L V6 TBI
GMCSafari Van1987-19954.3L V6 TBI

EP GM distributor full series compatibility overview

Application scenarios

Astro and Safari van fleet maintenance

Fleet operators using Astro and Safari vans for light commercial delivery replace high-mileage 4.3L distributors with EP-1639A.

Family van service shop

Service shops maintaining Astro and Safari vans for family use stock EP-1639A alongside EP-1639 for complete 4.3L Astro coverage.

GM 4.3L V6 wholesale supply

Parts distributors stock both EP-1639 and EP-1639A to cover the full range of GM 4.3L V6 distributor configurations across Astro/Safari applications.

Installation guide

Verify OEM 10496786 or 10467353 on existing distributor before installing EP-1639A. Disconnect battery. Mark distributor position. Disconnect connectors. Remove hold-down and old distributor. Install EP-1639A in same orientation. Reconnect connectors. No timing adjustment required on TBI-equipped applications.

Need pricing or technical assistance?

We respond within 24 hours · MOQ as low as 1 unit · OEM/private-label available

Quality assurance

Every EP GM distributor is manufactured under ISO 9001:2015 certified quality management. Each unit is individually tested for cap-to-rotor alignment, pickup or optical sensor signal function, shaft seal integrity, and electrical connector specification before shipment. CE-EMC electromagnetic compatibility certification, UL listing, and UKCA conformity mark confirm compliance across all major export markets. Units ship complete with cap and rotor -- no additional components required for installation.

EP ISO 9001 CE EMC UL UKCA enterprise certifications

More EP HEI distributors

ModelApplicationEngine
EP-8381Chevy Camaro 5.7L 1992-94 Optispark BilletLT1 Billet
EP-83811Pontiac Firebird 5.7L 1993-94 Optispark BilletLT1 Billet
EP-1832Chevy Camaro/Corvette 5.7L 1992-94 OptisparkLT1 Standard
EP-1803Pontiac Firebird 5.7L 1993-94 OptisparkLT1 Standard
EP-1829Cadillac Escalade/Fleetwood 5.7LGM EFI V8
EP-1829ACadillac Escalade 5.7L / Chevy V8 VariantGM EFI V8
EP-1830Chevy GMC 5.0/5.7L V8 C1500 Blazer 1987-1995Core GM V8
EP-1830AChevy GMC 5.0/5.7L V8 VariantGM V8 Variant

About the manufacturer

EP (Ever-Power) — Automotive Ignition Specialist Since 1999

25+

Years in production

300+

Distributor models

80%

Export ratio

4

Certifications

HZPT is the international brand of Ningbo Xianlong Automobile Fittings Co., Ltd., established 1999. With over 25 years of distributor manufacturing experience, EP provides the automotive aftermarket with reliable OEM-specification replacement distributors for GM vehicles from the classic EFI era of the late 1980s through the mid-1990s -- a period when millions of C/K trucks, Blazers, Suburbans, and passenger cars were built with distributors that have now accumulated 30 or more years of service and are approaching or past their reliable service life.

EP ignition distributor manufacturing facility

Each EP GM Distributor ships as a complete plug-and-play assembly -- distributor body, cap, rotor, and all sensors -- ready for direct installation without modification. Reference OEM part numbers are provided for fitment verification. EP is part of the Ever-Power Group, also producing PTO drive shafts and a comprehensive range of mechanical transmission products.

Frequently asked questions

What are the symptoms of a failing GM EFI distributor?
Common failure symptoms for GM EFI distributors of this era include intermittent no-start conditions, engine stalling at operating temperature, erratic idle quality, loss of power under acceleration, and check engine codes related to the distributor reference signal or cam position sensor. The Vortec-era distributors (1996-2002) are particularly known for plastic housing cracking or warping from heat cycling, which allows oil or coolant contamination of the optical or magnetic pickup sensor inside the housing. The LT1 Optispark distributors (1992-1994) are known for moisture infiltration that degrades the optical sensor window, typically producing a characteristic hard cold-start condition that improves as the engine warms up.
Does the EP-1639A ship with the cap, rotor, and all necessary sensors?
Yes. The EP-1639A ships as a complete plug-and-play assembly including the distributor body, distributor cap, rotor, and all internal sensors required for operation in the listed applications. For Optispark LT1 units, the optical sensor assembly is included as part of the complete distributor. For standard EFI units, the magnetic pickup and cam position reference sensor are integrated into the assembly. No additional ignition components are required beyond the standard ignition module and coil already present on your vehicle.
Does the Chevy Astro 4.3L use the same distributor as the S10 Blazer 4.3L?
The Chevrolet Astro rear-wheel-drive 4.3L V6 and the S10 Blazer 4.3L V6 share the same basic engine block but may have different distributor configurations due to different engine management systems and vehicle packaging. For Astro/Safari van applications, use EP-1639A (OEM 10496786) or EP-1639. For S10 Blazer and similar applications, see EP-1636 and EP-1635/1635A in this series. Always verify the OEM number on your existing distributor for the most accurate fitment.
Do I need to reset the timing after installing this distributor?
For most GM EFI applications of this era, the distributor does not require timing adjustment after replacement if the engine is set to top dead center (TDC) before the old distributor is removed and the new unit is installed in the same position. Most 1987-1995 GM TBI and EFI applications use a computer-controlled timing advance that does not require a timing light for replacement -- align the distributor housing marks and the rotor to the same position as the original unit. For 1992-1994 LT1 Optispark applications, the base timing is not adjustable in the field; the Optispark provides a crankshaft-referenced timing signal and the PCM controls all timing advance. Consult the factory service manual for your specific vehicle year and engine for the correct installation procedure.
How do I order the EP-1639A for export or wholesale?
EP supports single-unit orders for market sampling, carton quantities for repair shops and parts counters, and container-volume wholesale orders. Standard production lead time is 15-30 days. OEM branding and private-label packaging are available for qualifying volumes. Contact our team via the inquiry form or WhatsApp for pricing and availability.

Ready to order EP HEI distributors?

300+ models · 65K coil · Brass terminals · Factory-direct pricing · Global export

Disclaimer: Chevrolet, GMC, Pontiac, Buick, Cadillac, Isuzu, and other vehicle brand names and OEM part numbers are used for product compatibility reference only. EP (Ever-Power) products are high-quality aftermarket replacement parts and are not affiliated with original vehicle or component manufacturers. Always verify fitment using the OEM part number on your existing distributor before ordering. All trademarks remain the property of their respective owners.

LMC

Additional information

Editd by

LMC

Product Quick Detail:

  • Standard and non-standard available
  • With high quality and competitive price
  • Prompt delivery
  • Packing as per customer’s demand.

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
product packages

en_USEnglish