5040 Taper Lock Bushings

5040 Taper Lock Bushings

If you are not familiar with bushings, you may not know the types available. There are three main types, QD, cone lock, and split cone. Each style is available in a range of bore sizes and mates with similar components. Below, we explain the different types of bushings and why they are useful. You can use the information in this article to determine the casing required for a specific application.
Taper-Lock: This type of bushing is designed to reduce through-hole length. These bushings use set screws to secure the bushings to their mating parts. They also have a taper of 1-11/16 inches per foot. These bushings are best for applications with minimal clamping force. However, they are not recommended for reverse or shock load applications.
Taper Locks: These bushings are manufactured to precise tolerances. They are ideal for power transmission applications. Additionally, they feature cap screws for added security. In some cases, this type of bushing must be ordered separately. Conical lock bushings are also available for SAE grade 5.
Taper-Lock: This type of bushing is made of tapered material and is used in a variety of applications, including power transmission. Its wedge-shaped grip locks the shaft without deforming it, and it also allows for quick removal. These are the most common types of tapered bushings.

Taper Lock Bushing Size Chart

The dimension table below shows the standard dimensions of the taper lock bushing, please note that the following figure is the basic dimension required, the actual installation and removal of the bolt holes may vary.

taper lock bushing

Despite the name, tapered bushings are used not only for shafts but for a wide range of applications, including power transmission. These bushings connect the shaft to the rollers and pulleys. They have wedge-action tapered grips that allow them to lock in place without deforming the shaft and release easily. Some applications of tapered bushings are listed below. These are common types of tapered bushings.
Typically, tapered bushings are used on the shaft where the pulley is mounted. They are separated, and screws are used to fasten them. This makes them ideal for high torque applications. They are also a popular choice for flush-mounted ceiling lights. This is due to their evenly distributed installations. They are also used to mount sprockets. They also make alignment easy. If you're looking for a high-quality tapered bushing, look no further.
Once you've sourced the tapered bushing, it's time to install it. To ensure a secure fit, first, align the threads of the shaft and sprocket. Then, insert the bushing screws into the threaded holes. After installing the shaft, the screws should be slowly tightened. Alternatively, you can use a rubber mallet and block to set the bushing when the axle is loose. You can then cycle through each screw until you reach the desired torque. You can then grease the bushing to prevent contamination.

Click and check out more products you're looking for.

Q1. Are you a factory?
A. Yes. We are a factory with more than 15 years of manufacturing experience.

Q2. Is OEM and ODM service available?

A. Of course. We have many years of experience in OEM& ODM service.

Q3. I am buying from another supplier, but need better service. Would you match or beat the price I am paying?
A. We always feel we provide the best service and competitive prices. We would be happy to personalize a competitive quote for you, email us.

Additional information

Edited

CX

Product Quick Detail:

  • Standard and non-standard available
  • With high quality and competitive price
  • Prompt delivery
  • Packing as per customer’s demand.

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
product packages