S2 Split Taper Bushings

Bushing is an integral part of the machine that prevents wear on rotating or sliding shaft components. They are used in almost all industrial applications. Their excellent anti-friction properties and high load-carrying capacity make them a necessity in many different industries. From construction to mining, agriculture to transportation, hydroelectric power, food processing, and more, the casing is an essential part of your machinery. This versatile component will prevent your machine from failing, saving you time and money in the long run.

Dimensions of the S2 Split Taper Bushings

• Bushing Type: S2
• Bore Size: 1-15/16"、1-7/8"、2"、2-1/2"、2-1/4"、2-1/8"、2-11/16"、2-3/16"、2-3/4"、2-3/8"、2-5/8"、2-7/8"、3"、3-1/2"、3-1/4"、3-1/8"、3-11/16"、3-3/16"、3-3/4"、3-5/8"、3-7/8"、4"、4-1/8"、
• Dimension (L): 6-3/4"
• Dimension (U): 3/4"
• Dimension (T): 6"
• Dimension (D): 4.625"
• Dimension (H): 6-3/8"
• Dimension (V): 5-3/8"
• Dimension (W): 3/4"
• Dimension (X): 5-11/16"
• Dimension (Y): 5/16"
• Dimension (R): 5/16"
• Dimension (S): 3/8"
• Cap Screws Amount: 3
• Cap Screw Size: 1/2" X 2-1/4"
• Wrench Torque: 840 LBS
• Weight: 19 LBS

Installation

1. Make sure the bushing cone and interior of the driven product are clean and free of anti-seize lubricant.
2. Place the bushing into the sprocket or other part type that accepts bushings.
3. Loosely place the cap screws into the pull-up holes. The bushing remains loose to ensure a slip fit on the shaft.
4. Using the key on the shaft, slide the sprocket or other part type to the desired position on the shaft. Make sure the heads of the cap screws are accessible.
5. Align the sprockets or part types, alternately and incrementally tighten the screws until they are taut. Do not use extensions on the wrench handle, and do not allow sprockets or parts to be pulled out and contact the bushing flange. There should be a gap between the bushing flange and the sprocket at this point to ensure that the gap does not close.

Removal

1. Loosen and remove cap screws.
2. Insert the cap screws into the threaded removal holes.
3. Tighten the inserted screws until the sprocket or other part type is loose on the shaft.
4. Remove sprocket/part type from the shaft.

Use of tapered bushings

Despite the name, tapered bushings are used not only for shafts but for a wide range of applications, including power transmission. These bushings connect the shaft to the rollers and pulleys. They have wedge-action tapered grips that allow them to lock in place without deforming the shaft and release easily. Some applications of tapered bushings are listed below. These are common types of tapered bushings.
Typically, tapered bushings are used on the shaft where the pulley is mounted. They are separated, and screws are used to fasten them. This makes them ideal for high torque applications. They are also a popular choice for flush-mounted ceiling lights. This is due to their evenly distributed installations. They are also used to mount sprockets. They also make alignment easy. If you're looking for a high-quality tapered bushing, look no further.
Once you've sourced the tapered bushing, it's time to install it. To ensure a secure fit, first, align the threads of the shaft and sprocket. Then, insert the bushing screws into the threaded holes. After installing the shaft, the screws should be slowly tightened. Alternatively, you can use a rubber mallet and block to set the bushing when the axle is loose. You can then cycle through each screw until you reach the desired torque. You can then grease the bushing to prevent contamination.

Click and check out more products you're looking for.

Q1. Are you a factory?
A. Yes. We are a factory with more than 15 years of manufacturing experience.

Q2. Is OEM and ODM service available?

A. Of course. We have many years of experience in OEM& ODM service.

Q3. I am buying from another supplier, but need better service. Would you match or beat the price I am paying?
A. We always feel we provide the best service and competitive prices. We would be happy to personalize a competitive quote for you， email us.