14 Series Weasler PTO Shaft

14 Series Weasler PTO Shaft

14 series weasler PTO Shaft
The 14 series weasler PTO Shaft provides reliable service with durable construction. The 14 series weasler PTO Shaft yoke features a 1 in. x 1-1/8 in. solid rectangle bore for simple use. Part of 14 Series, this PTO yoke and shaft are designed to meet your needs. The PTO tractor yoke operates at up to 58 HP for efficiency.

Category:
Get a Free Quote

14 Series Weasler PTO Shaft

Specifications of 14 Series Weasler PTO shaft

The 14 series weasler PTO Shaft provides reliable service with durable construction. The 14 series weasler PTO Shaft yoke features a one in. x 1-1/8 in. solid rectangle bore for simple use. Part of 14 Series, this PTO yoke and shaft are designed to meet your needs. The PTO tractor yoke operates at up to 58 HP for efficiency.

14 series weasler PTO Shaft yoke and shaft to meet your needs
Centerline to End of Shaft: 35-2/3 in.
PTO drive shaft yoke features a one in. x 1-1/8 in. solid rectangle bore for easy operation
PTO tractor yoke operates at 58 HP/43 kilowatts @ 1000RPM or 38 HP/28 kilowatts @ 540RPM for efficiency
Weight: 12.7 lb/6 kilograms
Extension size: 25-5/8 in.

Bore 11.37 inches35 mm
Bore 11 3/8-6 SPLINE
Bore 2Minus End Yoke
Compressed (Closed) Length51.75 inches1314 mm
Compressed Overall Length60.00 inches1524 mm
Connection 1SPRING-LOK
Connection 2YOKE ARMS
Extended Length90.75 inches2305 mm
Extended Overall Length99.00 inches2515 mm
HP@1000RPM48 HP36 kilowatts
HP@540RPM28 HP21 kilowatts
Length60.00 inches1524 mm
Outside Diameter7.31 inches186 mm
Shipping Dimensions56.06" L  ×  7.31" H  ×  7.31" W142cm L  ×  19cm H  ×  19cm W
Shipping Volume2995.63 in349090 cm3
Shipping Weight33.82 pounds15 kilograms
Weight33.82 pounds15 kilograms

14 Series Weasler PTO shaft parts

▍14 Series Weasler PTO shaft implement yoke

 

 Round Bore

  • 1″ Round Bore (Dim. A)
  • With 1/4″ Standard Keyway and Set Screw
  • 1-1/8″ Round Bore (Dim. A)
  • With 1/4″ Standard Keyway and Set Screw
Hex Bore
  • 1-1/4″ Hex Bore (Dim. A)
  • With Set Screw
  • 1-1/8″ Hex Bore (Dim. A)
  • With Set Screw
Square Bore
  • 1″ Square Bore (Dim. A)
  • With Set Screw
  • 1-1/8″ Square Bore (Dim. A)
  • With Set Screw
  • 1-3/16″ Square Bore (Dim. A)
  • With Set Screw
  • 1-1/4″ Square Bore (Dim. A)
  • With Set Screw

Shear Pin Yoke

  • 1-1/8″ Round Bore (Dim. A)
  • With 1/4″ Pin Hole
  • 1-1/4″ Round Bore (Dim. A)
  • With 1/4″ Pin Hole

Other brands and models of PTO shaft

We can produce all these models with quality assurance

Bondioli & PavesiBY2     BYP4, S4     BY5, S6     BYP6, S7     BYP7, S8, HB     BYP8, S9      BYP10     BYP SH    BYP SO
Walterscheid2100    2200    2300    2400    2500    2600    2700    2800
Weasler6 series     12 series     14 series     35 series     44 series     55 series     77 series

We Also Supply Agricultural gearboxes

If you also need the agricultural gearboxes, click here：https://www.ever-power.net/agricultural-gearbox/

pto shaft

How to remove the stuck PTO drive shaft on the gearbox?

  1. Tractors with PTO drive shafts tow all types of PTO shaft-driven implements. When the PTO shaft of the implement is engaged with the PTO drive shaft of the tractor, the shaft rotates 1000 times per minute. The PTO shaft provides mechanical operation power for the implementation. The male drive shaft on the tractor has splines that match the female drive shaft on the implement. The locking pin or button locks the two together. You need to remove the PTO shaft to disconnect the implement from the tractor.
  2. Place the transmission of the vehicle in the parking space. Engage the parking brake and turn off the ignition key. By listening and looking at the oil pressure gauge, make sure that the motor is not running before climbing out of the vehicle.
  3. Face the back of the tractor, between the rear wheels. Check the connection position between the PTO shaft of the implement and the PTO shaft of the tractor. You will see the safety cover covering the area.
  4. Reach under the safety cover and feel around the machine coupling with your fingers. Locate the pin or button that locks the axle to the tractor. Press this button or pin with your thumb. Swing the shaft up and down and back and forth until the PTO shaft is separated from the PTO main shaft of the tractor.
  5. Unfasten all safety chains that secure the shield on the axle to the tractor. The PTO shaft is now removed.

warning
Never remove the PTO shaft from a running tractor. If you try, it may cause serious injury or death.

Related products

Product Quick Detail:

  • Standard and non-standard available
  • With high quality and competitive price
  • Prompt delivery
  • Packing as per customer’s demand.

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
product packages

en_USEnglish
en_USEnglish bg_BGBulgarian ru_RURussian cs_CZCzech bs_BABosnian thThai arArabic zh_CNChinese swSwahili amAmharic jaJapanese ko_KRKorean hu_HUHungarian es_ESSpanish azAzerbaijani elGreek viVietnamese da_DKDanish ms_MYMalay he_ILHebrew hrCroatian bn_BDBengali kirKyrgyz it_ITItalian pl_PLPolish fr_FRFrench kkKazakh pt_BRPortuguese