EP-TD-84 Acura Integra Civic Del Sol 1997-2000 multi Distributor (TD-81U)

EP-TD-84 Acura Integra Civic Del Sol 1997-2000 multi Distributor (TD-81U)

The EP-TD-84 is a complete ignition distributor for Acura Integra Civic Del Sol 1997-2000 multi (1997-2000). Verify OEM 30100-P2T-004 before ordering. Ships with cap and rotor. Replaces 30100-P2T-004 / TD-81U / TD-84U / TD-86U / TD-87U / Cardone 84-17408. ISO 9001:2015, CE-EMC, UL, UKCA certified. Ships with distributor cap and rotor included. EP (Ever-Power) is an ISO 9001:2015 certified manufacturer of automotive ignition components. CE-EMC, UL, and UKCA certified for compliance in all major export markets.

Categories: , , Tags: , ,
Get a Free Quote

EP Aftermarket Ignition Distributor

EP-TD-84 — Ignition Distributor for Acura Integra Civic Del Sol 1997-2000 multi

Acura Integra Civic Del Sol 1997-2000 multi distributor · 1997-2000 · TD-81U TD-84U TD-86U TD-87U · Replaces 30100-P2T-004 · Cap rotor

ISO 9001:2015CE-EMCUKCAGlobal Export

Model

EP-TD-84

Type

OBD2

App

Acura Integra Civic Del Sol 1997

OEM

30100-P2T-004

Cardone

84-17408

Technical specifications

ParameterDetail
EP Model No.EP-TD-84
Product typeIgnition Distributor — Complete Assembly
Vehicle applicationAcura Integra Civic Del Sol 1997-2000 multi
EngineHonda B18B / D16Y OBD2
Distributor typeTEC OBD2 multi-variant
OBD generationOBD2
IncludesDistributor body, cap, and rotor
Replaces OEM30100-P2T-004 · TD-81U TD-84U TD-86U TD-87U
NoteVerify OEM part number and distributor manufacturer logo before ordering
Cardone/Dorman84-17408 · 690-154
CertificationISO 9001:2015 · CE-EMC · UL · UKCA
BrandEP (Ever-Power)

Broad OBD2 multi-variant coverage: Acura Integra/Civic/Del Sol 1997-2000. Cardone 84-17408 with four TEC body IDs (TD-81U/84U/86U/87U) confirms multi-variant application.

OEM 30100-P2T-004 / TD-81U/84U/86U/87U. Cardone 84-17408 and Dorman 690-154.

Ships complete with cap and rotor. Verify the OEM part number on your existing distributor before ordering.

EP Honda distributor precision production

Key features

Acura Integra Civic Del Sol 1997-2000 multi OBD2

TD-81U TD-84U TD-86U TD-87U specification.

Replaces 30100-P2T-004

Primary Honda/Acura OEM reference.

Verify before ordering

Match OEM on existing distributor housing.

Complete cap and rotor

Ships with cap and rotor.

Vehicle fitment

MakeModelYearsEngine
Honda/AcuraAcura Integra Civic Del Sol 1997-2000 multi1997-2000Honda B18B / D16Y OBD2

EP Honda distributor full series compatibility overview

Application scenarios

Acura Integra Civic Del Sol 1997-2000 multi ignition service

Owners use EP-TD-84 for reliable replacement.

Honda specialist wholesale

Distributors stock EP-TD-84 for Acura Integra Civic Del Sol 1997-2000 multi coverage.

Global aftermarket supply

EP-TD-84 serves worldwide Honda aftermarket demand.

Installation guide

Verify OEM 30100-P2T-004 on existing distributor before installing. Disconnect battery. Disconnect connector(s). Remove hold-down bolt. Mark rotor position. Install EP-TD-84 in same orientation. Reconnect connector(s). Clear stored fault codes with OBD scanner.

Need pricing or technical assistance?

We respond within 24 hours · MOQ as low as 1 unit · OEM/private-label available

Quality assurance

Every EP Honda Distributor is manufactured under ISO 9001:2015 certified quality management. Each unit is tested for signal integrity, internal oil seal condition, and TEC or Hitachi-type cap/rotor interface before shipment. CE-EMC, UL, and UKCA certifications confirm compliance across all major export markets. Each unit ships complete with cap and rotor for direct OEM replacement installation.

EP ISO CE EMC UL UKCA certification

More EP HEI distributors

ModelApplicationEngine
EP-TD-01Honda Accord 1990-91 (TD-01)Honda/Acura
EP-TD-02Honda Civic/CRX 1990-91 (TD-02)Honda/Acura
EP-TD-03Acura Integra 1988-89 (TD-03)Honda/Acura
EP-TD-22Honda Civic/CRX 1988-91 (TD-22)Honda/Acura
EP-TD-23Acura Integra MT 1990-91 (TD-23)Honda/Acura
EP-TD-31Honda CRV 2.0L (TD-31)Honda/Acura
EP-TD-40Honda Civic 1.5L 92-95 variantHonda/Acura
EP-TD-41Honda Civic non-VTEC 1992-95Honda/Acura

About the manufacturer

EP (Ever-Power) — Automotive Ignition Specialist Since 1999

25+

Years in production

300+

Distributor models

80%

Export ratio

4

Certifications

Founded in 1999 in Ningbo, Zhejiang Province, EP manufactures precision automotive ignition components serving the global aftermarket. Our Honda Distributor range addresses all major Honda and Acura EFI distributor applications from the late 1980s through the early 2000s -- covering every engine family that used a distributor-based ignition system: the D-series Civic four-cylinders, the F-series Accord, the H-series Prelude, the B-series Acura Integra, the J-series CRV, and the Odyssey F-series V6.

EP ignition distributor production line

Wholesale buyers, Amazon resellers, and automotive service chains source Honda distributors directly from our factory, accessing OEM-quality units at factory-direct pricing. OEM branding and private-label packaging are available for qualifying volumes. EP is part of the Ever-Power Group, also producing gear racks and a comprehensive range of mechanical transmission products.

Frequently asked questions

What is the difference between a TEC and a Hitachi Honda distributor?
For most 1988-2000 Honda Civic and Accord models, Honda sourced distributors from two suppliers: TEC (Tokai Rika Electric) and Hitachi. The TEC and Hitachi distributors are NOT interchangeable -- they use different cap bolt patterns, different rotors, different internal components, and different external housing dimensions. You must replace your distributor with the same manufacturer type as the original. To identify your type, look for the letters TEC or the round Hitachi logo stamped on the side of your existing distributor housing. TD-series part numbers (TD-41, TD-42, TD-80, etc.) are typically TEC units. D4T and D6P prefix part numbers are Hitachi units.
What are the symptoms of a failing Honda distributor?
The most common Honda distributor failure symptoms include: intermittent no-start condition especially when the engine is hot (engine starts cold but fails to restart after reaching operating temperature -- a classic igniter failure pattern); rough or erratic idle; hesitation or stumbling under acceleration; a bouncing tachometer needle (classic sign of a failing igniter module); check engine light with OBD1 Code 9 (CYP sensor fault on 1992-1995 models) or OBD2 codes P0335/P0336 (CKP sensor), P1361/P1362 (TDC sensor), P1381/P1382 (CYP sensor), or P1399 (general misfire) on 1996-2000 models; and oil contamination inside the distributor cap (indicating failure of the internal shaft seal, part NOK BH3888E on TEC non-VTEC applications).
How do I verify my vehicle needs EP-TD-84 (30100-P2T-004)?
Check the OEM part number stamped on your existing distributor housing against 30100-P2T-004. Also verify the manufacturer logo -- TEC letters or round Hitachi logo. If uncertain, contact EP with your VIN and existing distributor OEM number for confirmation.
What is the difference between the VTEC and non-VTEC Honda distributor?
For Honda Civic 1992-1995, Honda produced two distributor specifications based on the engine type. The non-VTEC distributor (TD-41, OEM 30100-P06-A02) fits the D15B non-VTEC 1.5L engine. The VTEC distributor (TD-42, OEM 30100-P08-006) fits the D16Z6 VTEC 1.6L engine. These two distributors have different mounting bolt patterns and are NOT bolt-for-bolt interchangeable between VTEC and non-VTEC cylinder heads. Additionally, the TDC position signal differs between VTEC and non-VTEC configurations, so fitting the wrong distributor type causes incorrect ignition timing and potential engine fault codes.
What is the difference between OBD1 and OBD2 Honda distributors?
Honda transitioned from OBD1 to OBD2 engine management for the 1996 model year in North America. OBD1 distributors (1992-1995) use two connectors -- a small plug for the igniter and a larger plug for the cam position sensors (CYP, TDC, CKP). OBD2 distributors (1996-2000) typically use a single larger connector. The internal sensor configuration also differs: OBD1 distributors contain CYP (Cylinder Position), TDC (Top Dead Centre), and CKP (Crank Position) sensors inside the distributor housing. OBD2 distributors move some sensors to the crankshaft position. OBD1 and OBD2 distributors are not plug-in compatible without wiring modification. Always verify your vehicle year to order the correct OBD generation.
How do I order EP-TD-84 for export or wholesale?
EP supports single-unit orders for market sampling, carton quantities for repair shops and parts counters, and container-volume wholesale orders. Standard production lead time is 15-30 days. OEM branding and private-label packaging are available for qualifying volumes. Contact our team via the inquiry form or WhatsApp for pricing and availability.

Ready to order EP HEI distributors?

300+ models · 65K coil · Brass terminals · Factory-direct pricing · Global export

Disclaimer: Honda, Acura, Isuzu, Cardone, Dorman, TEC, Hitachi, and other brand names and OEM part numbers are used for product compatibility reference only. EP (Ever-Power) products are high-quality aftermarket replacement parts and are not affiliated with Honda Motor Co. or its subsidiaries. Always verify fitment using the OEM part number on your existing distributor before ordering. All trademarks remain the property of their respective owners.

LMC

Additional information

Editd by

LMC

Related products

Product Quick Detail:

  • Standard and non-standard available
  • With high quality and competitive price
  • Prompt delivery
  • Packing as per customer’s demand.

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
product packages

en_USEnglish
en_USEnglish bg_BGBulgarian ru_RURussian cs_CZCzech bs_BABosnian thThai arArabic zh_CNChinese swSwahili amAmharic jaJapanese ko_KRKorean hu_HUHungarian es_ESSpanish azAzerbaijani elGreek viVietnamese da_DKDanish ms_MYMalay he_ILHebrew hrCroatian bn_BDBengali kirKyrgyz it_ITItalian pl_PLPolish fr_FRFrench kkKazakh pt_BRPortuguese