What is an FHP17K Split Taper Bushing?

The FHP17K Split Taper Bushing is a mechanical component that mounts pulleys, sprockets, and other rotating equipment onto a shaft. It is a type of Split Taper Bushing that is designed to provide a secure and precise fit between the equipment and the shaft, while also allowing for easy installation and removal.

The FHP17K Split Taper Bushing has a tapered sleeve that is split along its length, allowing it to be compressed slightly when tightened onto the shaft. This compression creates a tight grip between the bushing and the post, which helps to prevent slipping and ensures that the equipment rotates smoothly and accurately.

The FHP17K Split Taper Bushing also has a flange with threaded holes that is used to secure the rotating equipment to the bushing. The flange is attached to the tapered sleeve with screws or bolts and has a bore that matches the diameter of the equipment's mounting hub. This bore is designed to fit snugly around the equipment's hub, which ensures that the equipment is centered and balanced correctly on the shaft.

One of the key features of the FHP17K Split Taper Bushing is its extremely high load capacity. It is designed to handle even higher loads than the FHP10K Split Taper Bushing, making it well-suited for the most heavy-duty industrial applications.

The FHP17K Split Taper Bushing is also known for its ease of installation and removal, thanks to the split design of the tapered sleeve. This allows it to be easily placed onto the shaft without requiring a press or other specialized tools. It can also be easily removed from the post without damaging the bushing or the equipment.

Overall, the FHP17K Split Taper Bushing is a reliable and durable component that is widely used in the most heavy-duty industrial applications where precise and secure mounting of rotating equipment is required. It is suitable for use in various industries, including mining, material handling, oil and gas, and construction, where extremely high loads are present.

FHP17K Split Taper Bushing Dimensions:

What Can FHP17K Split Taper Bushing be used for？

The FHP17K Split Taper Bushing is a mechanical component that mounts pulleys, sprockets, and other rotating equipment onto a shaft in the most heavy-duty industrial applications. It is designed to provide a secure and precise fit between the kit and the post, allowing easy installation and removal.

The FHP17K Split Taper Bushing is suitable for use in the most extreme heavy-duty industrial applications where the highest loads are present, such as:

1. Mining: The FHP17K Split Taper Bushing can be used to mount pulleys and sprockets in mining equipment such as crushers, screens, and conveyor systems.

2. Material Handling: The FHP17K Split Taper Bushing is commonly used in the most heavy-duty material handling equipment such as conveyors, elevators, and cranes.

3. Oil and Gas: The FHP17K Split Taper Bushing can be used in the most heavy-duty oil and gas drilling equipment, such as mud pumps and draw works.

4. Construction: The FHP17K Split Taper Bushing can be used in the most extensive construction equipment, such as excavators and bulldozers, and in the most heavy-duty power transmission applications.

Overall, the FHP17K Split Taper Bushing is a high-performance component that can be used in the most demanding heavy-duty industrial applications where precise and secure mounting of rotating equipment is required. Its extremely high load capacity and ease of installation and removal make it a convenient choice for many maintenance and repair operations in the most extreme heavy-duty applications.

Click and check out more products you're looking for.

How To Remove FHP17K Split Taper Bushing?

To remove an FHP17K Split Taper Bushing, you will need a few tools and some basic mechanical skills. Here are the steps to follow:

1. Remove the equipment from the shaft: Before attempting to remove the bushing, it is essential to remove the equipment that is mounted on the bushing from the post. This can be done by loosening the bolts or screws that secure the equipment to the bushing's flange.

2. Loosen the bushing: The FHP17K Split Taper Bushing has a split design, allowing it to be compressed slightly when tightened onto the shaft. To loosen the bushing, you will need to use a bushing removal tool, which is a specialized tool designed to fit around the bushing and exert pressure to expand it slightly. This will release the grip of the bushing on the shaft.

3. Remove the bushing: Once loosened, remove it from the shaft by tapping it gently with a hammer or using a puller tool. Be careful not to damage the bushing or the post during removal.

4. Clean the shaft: After removing the bushing, it is a good idea to clean the post thoroughly to remove any dirt or debris that may have accumulated during the operation.

5. Inspect the bushing: Once it has been removed, inspecting it for damage or wear is a good idea. If the bushing shows signs of damage or excessive wear, it should be replaced with a new one.

6. Install a new bushing: If necessary, install a new FHP17K Split Taper Bushing onto the shaft using the same procedure as for the removal. Be sure to follow the manufacturer's instructions carefully to ensure a proper fit and secure installation.

By following these steps, you can remove an FHP17K Split Taper Bushing from a shaft safely and effectively, allowing for maintenance or replacement as needed.

We also offer other types of bushing

Chinese steel wheel hub manufacturer
Are you seeking high-quality bushings or steel wheels to meet your industrial or agricultural needs? Just take a look at Ever power, and you will know that our comprehensive selection of conical locking bushings, QD bushings, open conical bushings, FHPK bushings, steel wheels for available conical bushings, XH wheels, QD welded wheels and welded wheels for conical bushings will meet all your typical application needs, including sprocket, pulley, and pulley applications. The primary purpose of the bushing is to connect the components to the shaft. Whether you are facing space, time, or size limitations, our bushings can meet your needs, and due to these reasons, we usually use bushings instead of drilled wheels according to size. In addition, with our extensive inventory of bore diameters, including many standard inch and metric bore bushings, you can be confident that we will provide suitable bushings for your application.
Various materials, such as stainless steel, aluminum, and copper, are available for steel wheel hubs used for split tapered bushings. Ever Power's steel wheels are the perfect choice if you are looking for a range of competitive high-quality products. The steel wheels used for Ever power split conical bushings have been carefully crafted to meet or exceed industry standards. We can provide alternatives such as Dodge wheels, Browning wheels, Martin wheels, etc. The steel hub of the split conical sleeve is made of C45 steel and is suitable for various industrial applications.