0.75-220KW three-phase power supply AC310 high-performance vector frequency converter 220V

Maximize Efficiency and Control with Our Vector Frequency Converter

Take your power transmission capabilities to new heights with our high-performance Vector Frequency Converter. Engineered with precision and innovation, this converter offers unparalleled efficiency and control for your electrical systems.

- Superior Energy Efficiency: Our Vector Frequency Converter utilizes advanced technology to optimize energy consumption. Adjusting the frequency and voltage supplied to your motors minimizes energy wastage and reduces operating costs. Say goodbye to unnecessary electricity expenses and embrace a greener, more sustainable solution.

- Enhanced Motor Control: With our Vector Frequency Converter, you have complete control over your motors' speed and torque. Its precise vector control algorithm ensures smooth and accurate motor performance, allowing for precise adjustments to match your specific application requirements. Experience exceptional control and responsiveness for a wide range of industrial applications.

- Dynamic Load Adaptation: Our Vector Frequency Converter excels in dynamically adapting to changing load conditions. Whether you're dealing with fluctuating demands or sudden variations in torque requirements, this converter seamlessly adjusts the motor's output to maintain stability and optimal performance. Enjoy reliable operation even in the most demanding and dynamic industrial environments.

Application of high-performance vector frequency converter in permanent magnet motors

High-performance vector frequency converters can be used to control permanent magnet motors. These converters allow the modulation of the current frequency, making it possible to regulate the engine's speed precisely.
Some applications of permanent magnet motors include:
Computer drives;
Household items such as electric toothbrushes and vacuum cleaners;
Operating windshield wipers and heater blowers in automobiles;
Electric tools such as drills and hedge trimmers.

Product Profile

Book-based carrier design, with a maximum reduction of 60% in volume, modular structure layout, and higher sealing degree of electronic components.	Direct cooling from top to bottom, can be installed side by side, making reasonable use of space, greatly reducing cabinet volume and cost, and creating unlimited value with limited space.	Professional European-style terminals ensure safety and reliability while saving wiring time and improving cabinet efficiency.

Characteristic performance

Optimizing Synchronous Motor Drive - High Frequency Injection Method Through high-frequency signal injection during open-loop operation, the output of 200% rated torque at 0Hz under open-loop control is achieved for the permanent magnet synchronous motor, making the starting effect more stable under heavy load.	Leading self-learning algorithms Performing motor static self-learning to obtain motor parameters when the motor cannot detach the load is comparable to rotating self-learning.

*Compatible with synchronous reluctance motor algorithms to adapt to future market trends

*Dual SPI expansion ports with self-identifying expansion cards, with rich expansion functions and everything available

*New protection function, achieving comprehensive protection from internal to external motors of frequency converters and other equipment

*New feature code layout, easy to use and search

Nameplate and type description of frequency converter

The rated output current of the frequency converter

Technical specifications

Installation dimensions

Installation dimensions

External dimensions of frequency converter (iron shell)

External dimensions of frequency converter (cabinet machine)

Advantages of frequency converter in permanent magnet motors

Frequency converters offer several advantages when used in conjunction with Permanent Magnet Motors (PMMs). Here are some key advantages of using frequency converters with PMMs:

1. **Precise Speed and Torque Control:** Frequency converters allow for precise control of the speed and torque output of PMMs. By adjusting the frequency and voltage supplied to the motor, the converter can control the motor's rotational speed and torque with high accuracy. This level of control enables fine-tuning of motor performance, making it suitable for applications that require precise speed and torque control, such as robotics, CNC machines, and precision motion control systems.

2. **High Energy Efficiency:** PMMs are inherently energy-efficient due to their permanent magnet rotor design. When combined with a frequency converter, the energy efficiency of PMMs can be further enhanced. The converter adjusts the frequency and voltage supplied to the motor based on the load demand, ensuring that the motor operates at the most efficient operating point. This results in reduced energy consumption, lower operating costs, and increased overall system efficiency.

3. **Wide Speed Range:** Frequency converters enable PMMs to operate over a wide range of speeds. Unlike fixed-speed motors, PMMs with frequency converters can be easily adjusted to operate at different speeds as per the application requirements. This flexibility in speed control makes PMMs suitable for applications that demand variable speeds, such as conveyor systems, pumps, and variable speed drives.

4. **Smooth Starting and Stopping:** Frequency converters provide smooth starting and stopping capabilities for PMMs. They allow for gradual ramping up and down of the motor's speed, eliminating the sudden jolts and mechanical stresses associated with direct-on-line starting and stopping. This gentle starting and stopping action helps to prolong the motor's lifespan, reduces wear and tear on the driven equipment, and ensures smoother operation in applications that require controlled acceleration and deceleration.

5. **Dynamic Response and Load Adaptation:** Frequency converters enable PMMs to have excellent dynamic response and load adaptation capabilities. They can quickly and accurately respond to changes in load conditions, adjusting the motor's speed and torque output accordingly. This responsiveness is crucial in applications where rapid changes in speed or load fluctuations occur, allowing PMMs to maintain stability and performance under varying operating conditions.

6. **Protection and Diagnostic Features:** Many frequency converters come with built-in protection and diagnostic features that enhance the reliability and lifespan of PMMs. These features monitor important motor parameters, such as voltage, current, and temperature, and provide real-time feedback on motor performance. In case of abnormal operating conditions or faults, the converter can trigger protective measures, such as overcurrent or overheating shutdowns, preventing motor damage and improving overall system safety.

7. **Compatibility with Various Motor Types:** Frequency converters are designed to be compatible with various motor types, including PMMs. This compatibility allows for easy integration and use of PMMs with frequency converters, providing a versatile and efficient power transmission solution. It also ensures that the advantages of frequency converters, such as precise control and energy efficiency, can be fully realized in PMM applications.

In summary, frequency converters offer numerous advantages when used with Permanent Magnet Motors. They provide precise speed and torque control, enhance energy efficiency, enable a wide speed range, ensure smooth starting and stopping, offer dynamic response and load adaptation capabilities, provide protection and diagnostic features, and are compatible with various motor types. These advantages make frequency converters a valuable component in maximizing the performance and efficiency of PMM applications across a wide range of industries.

Our Company

Every power company can produce over 1500 AC and DC motor product specifications in 18 series. We have 156 sets of leading production equipment, including 6 workshops for stamping, laminating, metalworking, winding, embedding, and final assembly. The main components include organic seats, central and pole-changing iron cores, main and pole-changing coils, armatures, end covers, brush holders, and external constituents. The entire manufacturing process of the motor is mainly completed through key functions such as welding, dynamic balancing, painting, and performance testing. Through the quality inspection of motor products by the Jiangsu Provincial Quality and Technical Supervision Department, it meets the national technical performance indicators, has excellent product quality, and the factory pass rate of the product reaches 100%. There are no major quality problem complaints, and customers deeply trust it. At the same time, a sound and comprehensive after-sales service management system has been established, with sales service outlets in major and medium-sized cities in China continuously increasing market coverage and customer satisfaction.

Our factory