EP-TD-77 Honda Prelude H22A4 VTEC 1997-2001 Distributor (TD-77)

The EP-TD-77 is a complete ignition distributor for Honda Prelude H22A4 VTEC 1997-2001 (1997-2001). Verify OEM 30100-P5M-A01 before ordering. Ships with cap and rotor. Replaces 30100-P5M-A01 / TD-77. ISO 9001:2015, CE-EMC, UL, UKCA certified. Ships with distributor cap and rotor included. EP (Ever-Power) is an ISO 9001:2015 certified manufacturer of automotive ignition components. CE-EMC, UL, and UKCA certified for compliance in all major export markets.

EP Aftermarket Ignition Distributor

EP-TD-77 — Ignition Distributor for Honda Prelude H22A4 VTEC 1997-2001

Honda Prelude H22A4 VTEC 1997-2001 distributor · 1997-2001 · TD-77 · Replaces 30100-P5M-A01 · Cap rotor

ISO 9001:2015CE-EMCUKCAGlobal Export

Model

EP-TD-77

Type

OBD2

App

Honda Prelude H22A4 VTEC 1997-20

OEM

30100-P5M-A01

Cardone

Technical specifications

ParameterDetail
EP Model No.EP-TD-77
Product typeIgnition Distributor — Complete Assembly
Vehicle applicationHonda Prelude H22A4 VTEC 1997-2001
EngineHonda H22A4 2.2L DOHC VTEC
Distributor typeTEC OBD2 external coil
OBD generationOBD2
IncludesDistributor body, cap, and rotor
Replaces OEM30100-P5M-A01 · TD-77
NoteVerify OEM part number and distributor manufacturer logo before ordering
Cardone/Dorman
CertificationISO 9001:2015 · CE-EMC · UL · UKCA
BrandEP (Ever-Power)

EP-TD-77 covers the fifth-generation Honda Prelude (BB5/BB6 chassis) 1997-2001 with H22A4 2.2L DOHC VTEC -- successor to TD-61 (fourth-gen Prelude 1992-95).

OEM 30100-P5M-A01 / TD-77. The H22A4 delivers revised VTEC cam profiles for improved performance in the final Prelude generation.

Ships complete with cap and rotor. Verify the OEM part number on your existing distributor before ordering.

EP Honda distributor precision production

Key features

Honda Prelude H22A4 VTEC 1997-2001 OBD2

TD-77 specification.

Replaces 30100-P5M-A01

Primary Honda/Acura OEM reference.

Verify before ordering

Match OEM on existing distributor housing.

Complete cap and rotor

Ships with cap and rotor.

Vehicle fitment

MakeModelYearsEngine
Honda/AcuraHonda Prelude H22A4 VTEC 1997-20011997-2001Honda H22A4 2.2L DOHC VTEC

EP Honda distributor full series compatibility overview

Application scenarios

Honda Prelude H22A4 VTEC 1997-2001 ignition service

Owners use EP-TD-77 for reliable replacement.

Honda specialist wholesale

Distributors stock EP-TD-77 for Honda Prelude H22A4 VTEC 1997-2001 coverage.

Global aftermarket supply

EP-TD-77 serves worldwide Honda aftermarket demand.

Installation guide

Verify OEM 30100-P5M-A01 on existing distributor before installing. Disconnect battery. Disconnect connector(s). Remove hold-down bolt. Mark rotor position. Install EP-TD-77 in same orientation. Reconnect connector(s). Clear stored fault codes with OBD scanner.

Need pricing or technical assistance?

We respond within 24 hours · MOQ as low as 1 unit · OEM/private-label available

Quality assurance

Every EP Honda Distributor is manufactured under ISO 9001:2015 certified quality management. Each unit is tested for signal integrity, internal oil seal condition, and TEC or Hitachi-type cap/rotor interface before shipment. CE-EMC, UL, and UKCA certifications confirm compliance across all major export markets. Each unit ships complete with cap and rotor for direct OEM replacement installation.

EP ISO CE EMC UL UKCA certification

More EP HEI distributors

ModelApplicationEngine
EP-TD-01Honda Accord 1990-91 (TD-01)Honda/Acura
EP-TD-02Honda Civic/CRX 1990-91 (TD-02)Honda/Acura
EP-TD-03Acura Integra 1988-89 (TD-03)Honda/Acura
EP-TD-22Honda Civic/CRX 1988-91 (TD-22)Honda/Acura
EP-TD-23Acura Integra MT 1990-91 (TD-23)Honda/Acura
EP-TD-31Honda CRV 2.0L (TD-31)Honda/Acura
EP-TD-40Honda Civic 1.5L 92-95 variantHonda/Acura
EP-TD-41Honda Civic non-VTEC 1992-95Honda/Acura

About the manufacturer

EP (Ever-Power) — Automotive Ignition Specialist Since 1999

25+

Years in production

300+

Distributor models

80%

Export ratio

4

Certifications

EP (Ever-Power) has manufactured OEM-grade automotive ignition distributors since 1999, exporting to aftermarket distributors, repair shops, and wholesale buyers across North America, Europe, Australia, and Southeast Asia. Our Honda Distributor series covers the complete range of Honda and Acura distributor applications spanning the 1988-2002 production period -- Honda Civic, Accord, Prelude, CRV, Odyssey, Del Sol, CRX, and Acura Integra and CL across OBD0, OBD1, and OBD2 generations.

EP ignition distributor manufacturing facility

ISO 9001:2015 quality management, CE-EMC certification, UL listing, and UKCA conformity cover every unit we ship. Each Honda distributor is individually tested for signal integrity, internal oil seal condition, TEC or Hitachi compatibility, and cap/rotor interface before shipment. Units ship complete with cap and rotor. EP is part of the Ever-Power Group, also producing PTO drive shafts and a comprehensive range of mechanical transmission products.

Frequently asked questions

What is the difference between a TEC and a Hitachi Honda distributor?
For most 1988-2000 Honda Civic and Accord models, Honda sourced distributors from two suppliers: TEC (Tokai Rika Electric) and Hitachi. The TEC and Hitachi distributors are NOT interchangeable -- they use different cap bolt patterns, different rotors, different internal components, and different external housing dimensions. You must replace your distributor with the same manufacturer type as the original. To identify your type, look for the letters TEC or the round Hitachi logo stamped on the side of your existing distributor housing. TD-series part numbers (TD-41, TD-42, TD-80, etc.) are typically TEC units. D4T and D6P prefix part numbers are Hitachi units.
What are the symptoms of a failing Honda distributor?
The most common Honda distributor failure symptoms include: intermittent no-start condition especially when the engine is hot (engine starts cold but fails to restart after reaching operating temperature -- a classic igniter failure pattern); rough or erratic idle; hesitation or stumbling under acceleration; a bouncing tachometer needle (classic sign of a failing igniter module); check engine light with OBD1 Code 9 (CYP sensor fault on 1992-1995 models) or OBD2 codes P0335/P0336 (CKP sensor), P1361/P1362 (TDC sensor), P1381/P1382 (CYP sensor), or P1399 (general misfire) on 1996-2000 models; and oil contamination inside the distributor cap (indicating failure of the internal shaft seal, part NOK BH3888E on TEC non-VTEC applications).
How do I verify my vehicle needs EP-TD-77 (30100-P5M-A01)?
Check the OEM part number stamped on your existing distributor housing against 30100-P5M-A01. Also verify the manufacturer logo -- TEC letters or round Hitachi logo. If uncertain, contact EP with your VIN and existing distributor OEM number for confirmation.
How do I order EP-TD-77 for export or wholesale?
EP supports single-unit orders for market sampling, carton quantities for repair shops and parts counters, and container-volume wholesale orders. Standard production lead time is 15-30 days. OEM branding and private-label packaging are available for qualifying volumes. Contact our team via the inquiry form or WhatsApp for pricing and availability.

Ready to order EP HEI distributors?

300+ models · 65K coil · Brass terminals · Factory-direct pricing · Global export

Disclaimer: Honda, Acura, Isuzu, Cardone, Dorman, TEC, Hitachi, and other brand names and OEM part numbers are used for product compatibility reference only. EP (Ever-Power) products are high-quality aftermarket replacement parts and are not affiliated with Honda Motor Co. or its subsidiaries. Always verify fitment using the OEM part number on your existing distributor before ordering. All trademarks remain the property of their respective owners.

LMC

Additional information

Editd by

LMC

Product Quick Detail:

  • Standard and non-standard available
  • With high quality and competitive price
  • Prompt delivery
  • Packing as per customer’s demand.

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
product packages

en_USEnglish