What is an FHP13K Split Taper Bushing?

The FHP13K Split Taper Bushing is a mechanical component that mounts pulleys, sprockets, and other rotating equipment onto a shaft. It is a type of Split Taper Bushing designed to provide a secure and precise fit between the gear and the post, while allowing for easy installation and removal.

The FHP13K Split Taper Bushing has a tapered sleeve that is split along its length, allowing it to be compressed slightly when tightened onto the shaft. This compression creates a tight grip between the bushing and the post, which helps to prevent slipping and ensures that the equipment rotates smoothly and accurately.

Like other split taper bushings, the FHP13K Split Taper Bushing has a flange with threaded holes that is used to secure the rotating equipment to the bushing. The flange is attached to the tapered sleeve with screws or bolts and has a bore that matches the diameter of the equipment's mounting hub. This bore is designed to fit snugly around the equipment's hub, which ensures that the equipment is centered and balanced correctly on the shaft.

The FHP13K Split Taper Bushing is designed to handle moderate to high loads, making it well-suited for various industrial applications. Due to its ease of installation and removal, it is advantageous in applications where frequent installation and removal of equipment is required.

Overall, the FHP13K Split Taper Bushing is a reliable and durable component that is widely used in industrial applications where precise and secure mounting of rotating equipment is required. It is suitable for use in various industries, including mining, material handling, oil and gas, and construction.

FHP13K Split Taper Bushing Dimensions:

What Can FHP13K Split Taper Bushing be used for？

The FHP13K Split Taper Bushing is a mechanical component that mounts pulleys, sprockets, and other rotating equipment onto a shaft in industrial applications. It is designed to provide a secure and precise fit between the gear and the post, allowing easy installation and removal.

The FHP13K Split Taper Bushing is suitable for use in a wide range of industrial applications where moderate to high loads are present, including:

1. Material Handling: The FHP13K Split Taper Bushing can be used in material handling equipment such as conveyors, elevators, and cranes.

2. Agriculture: The FHP13K Split Taper Bushing can be used in agricultural equipment such as harvesters and tractors.

3. Automotive: The FHP13K Split Taper Bushing is used in automotive applications such as camshafts and crankshafts.

4. Mining: The FHP13K Split Taper Bushing can be used to mount pulleys and sprockets in mining equipment such as crushers, screens, and conveyor systems.

5. Construction: The FHP13K Split Taper Bushing can be used in construction equipment such as excavators, bulldozers, and power transmission applications.

Overall, the FHP13K Split Taper Bushing is a versatile component that can be used in various industrial applications where precise and secure mounting of rotating equipment is required. Its ease of installation and removal and its ability to handle moderate to high loads make it a convenient choice for many maintenance and repair operations in industrial applications.

Click and check out more products you're looking for.

How To Install FHP13K Split Taper Bushing?

Here are the general steps to install an FHP13K Split Taper Bushing:

1. Clean the shaft: Before installing the bushing, make sure the shaft is clean and free of any debris or burrs. This will help ensure a proper fit.

2. Lubricate the bushing: Apply a light coating of lubricant to the inside of the bushing. This will help the bushing slide onto the shaft more easily.

3. Insert the bushing onto the shaft: Slide it onto the shaft and position it in the desired location. Use a puller or other tool to ensure that the bushing is fully seated on the shaft.

4. Tighten the screws: Attach the equipment to the bushing flange using screws or bolts. Tighten the screws or bolts evenly to ensure that the equipment is centered and balanced properly on the shaft.

5. Check the alignment: Use a dial indicator or other tool to check the alignment of the equipment. Make any necessary adjustments to ensure that the equipment is properly aligned.

6. Check the torque: A torque wrench tightens the screws or bolts to the manufacturer's recommended torque specifications.

7. Recheck the alignment: After tightening the screws or bolts, recheck the alignment of the equipment to ensure that it has not shifted during the installation process.

Installing an FHP13K Split Taper Bushing requires attention to detail and care to ensure proper fit and alignment. It is important to follow the manufacturer's instructions and to use the right tools and techniques to ensure that the bushing is installed correctly and that the equipment operates smoothly and efficiently.

We also offer other types of bushing

Chinese steel wheel hub manufacturer
Are you seeking high-quality bushings or steel wheels to meet your industrial or agricultural needs? Just take a look at Ever power, and you will know that our comprehensive selection of conical locking bushings, QD bushings, open conical bushings, FHPK bushings, steel wheels for available conical bushings, XH wheels, QD welded wheels and welded wheels for conical bushings will meet all your typical application needs, including sprocket, pulley, and pulley applications. The primary purpose of the bushing is to connect the components to the shaft. Whether you are facing space, time, or size limitations, our bushings can meet your needs, and due to these reasons, we usually use bushings instead of drilled wheels according to size. In addition, with our extensive inventory of bore diameters, including many standard inch and metric bore bushings, you can be confident that we will provide suitable bushings for your application.
Various materials, such as stainless steel, aluminum, and copper, are available for steel wheel hubs used for split tapered bushings. Ever power's steel wheels are the perfect choice if you are looking for a range of competitive high-quality products. The steel wheels used for Ever power split conical bushings have been carefully crafted to meet or exceed industry standards. We can provide alternatives such as Dodge wheels, Browning wheels, Martin wheels, etc. The steel hub of the split conical sleeve is made of C45 steel and is suitable for various industrial applications.