China Supplier TYP2 Series High Efficiency Ultra Inverter Permanent Magnet Synchronous Motor

A Permanent Magnet Synchronous Motor (PMSM) is an electric motor that uses permanent magnets embedded in the rotor (rotating part) to create a magnetic field. The motor's stator (stationary part) contains windings that produce a rotating magnetic field. The interaction between the permanent magnets and the rotating magnetic field in the stator generates torque, causing the rotor to rotate.

The TYP2 series ultra-efficient three-phase variable frequency permanent magnet synchronous motor must be used with a vector frequency converter. The rotor of this series of engines adopts a built-in permanent magnet structure, which has a specific convex torque. The frequency converter equipped with the maximum torque current ratio control method ensures that this series of motors has a high power factor, low no-load current, working current, and low copper consumption throughout the entire speed range. After embedding a permanent magnet in the rotor, the rotor and stator magnetic field operate synchronously during regular operation. The rotor winding has no induced current and no rotor resistance or hysteresis loss, which improves the motor's efficiency. When the engine operates at a load of 35% -120%, the efficiency and power factor are both high, and the energy-saving effect is noticeable. The TYP2 series ultra-efficient three-phase variable frequency permanent magnet synchronous motor is widely used in places such as fans, water pumps, injection molding machines, wire drawing machines, extruders, air compressors, piping equipment, pharmaceutical equipment, etc. The TYP series ultra-efficient three-phase variable frequency permanent magnet synchronous motors produced by our company can be divided into modified models (equivalent to the installation size of YE2 three-phase asynchronous motors) and high power density (capable of reducing 1-3 frame numbers) according to installation dimensions. It can meet the needs of energy-saving renovation projects and new development projects for three-phase asynchronous motors in the stock market under the background of carbon peaking and carbon neutrality.

Application of Permanent Magnet Synchronous Motor

Permanent Magnet Synchronous Motors (PMSMs) find application in various industries and systems where precise control, high efficiency, and high-performance characteristics are required. Here are some typical applications of Permanent Magnet Synchronous Motors:

1. **Industrial Machinery:** PMSMs are widely used in industrial machinery, including pumps, compressors, fans, conveyors, and machine tools. Their high torque density, precise control, and energy efficiency make them suitable for driving machinery in various manufacturing and processing operations.

2. **Robotics and Automation:** PMSMs are favored in robotics and automation systems due to their high torque-to-inertia ratio, fast response, and accurate positioning capabilities. They provide power and control for robotic arms, pick-and-place machines, and other automated systems.

3. **Electric Vehicles (EVs) and Hybrid Electric Vehicles (HEVs):** PMSMs are commonly employed in electric and hybrid electric vehicles for propulsion. Their high power density, compact size, and efficient operation contribute to improved vehicle performance and extended range.

4. **HVAC Systems:** PMSMs are used in heating, ventilation, and air conditioning (HVAC) systems, such as fans and pumps. Their variable speed control and energy efficiency help optimize airflow and improve system performance.

5. **Wind Turbines:** PMSMs are utilized in wind turbines, either directly coupled to the blades or through a gearbox. Their ability to generate power efficiently at varying wind speeds makes them suitable for harnessing wind energy.

6. **Appliances:** PMSMs are increasingly employed in household appliances, such as washing machines, dishwashers, and refrigerators. Their precise control and high efficiency contribute to improved performance and energy savings.

7. **Medical Equipment:** PMSMs are used in various medical equipment, including scanners, respirators, and laboratory devices. Their accurate motion control and low noise operation are critical in sensitive medical applications.

8. **Renewable Energy Systems:** PMSMs are utilized in renewable energy systems such as solar trackers and hydroelectric generators. Their high efficiency and precise control enable optimal energy conversion and utilization.

9. **Oil and Gas Industry:** PMSMs are employed in oil and gas applications, including pumps, compressors, and drilling rigs. Their robust construction, high torque capabilities, and precise control provide reliable and efficient operation in demanding environments.

10. **Aerospace and Defense:** PMSMs find application in aerospace and defense systems, including aircraft actuators, missile systems, and satellite mechanisms. Their high power density, lightweight design, and precise control are crucial for aerospace and defense applications.

These are just a few examples of the diverse applications for Permanent Magnet Synchronous Motors. Due to their efficiency, precise control, and performance advantages, PMSMs continue to find new applications in various industries, driving innovation and improving overall system performance.

Installation form
5 basic structural types
B3: A structural type with a base and no flange on the end cover.
B5: The landline does not have a base and has a flange (with a through hole) on the end cover.
B35: The base is equipped with a foot, and the end cover is fitted with a flange (with a through hole).
B34: The base is equipped with a foot, and the end cover is fitted with a flange (with screw holes).

B14: The machine base has no foot, and the end cover has a flange (with screw holes) structure.
The installation method of the motor complies with the provisions of IEC60034-7, and its structural type is shown in the following figure

Bearing selection

Outlet screw hole

Performance Data

注：1）DH尺寸只有出口电机要求，国内用户应按订货要求进行配制。

2）D尺寸公差：φ19-28为j6；φ38-48为K6；φ55-80为m6；φ95为m6。

注：1) R是法兰安装面至辅肩的距离。

2) DH尺寸只有出口电机要求，国内用户应按订货要求进行配制。

3) D尺寸公差：φ19-28为j6；φ38-48为K6；φ55-80为m6；φ95为m6。

4) N尺寸公差为j6。

注：1) R是法兰安装面至辅肩的距离。

2) DH尺寸只有出口电机要求，国内用户应按订货要求进行配制。

3) D尺寸公差：φ19-28为j6；φ38-48为K6；φ55-80为m6；φ95为m6。

注：1) R是法兰安装面至辅肩的距离。

2) DH尺寸只有出口电机要求，国内用户应按订货要求进行配制。

3) D尺寸公差：φ19-28为j6；φ38-48为K6；φ55-80为m6；φ95为m6

Our Company

Every power company can produce over 1500 AC and DC motor product specifications in 18 series. We have 156 sets of leading production equipment, including 6 workshops for stamping, laminating, metalworking, winding, embedding, and final assembly. The main components include organic seats, central and pole-changing iron cores, main and pole-changing coils, armatures, end covers, brush holders, and external constituents. The entire manufacturing process of the motor is mainly completed through key functions such as welding, dynamic balancing, painting, and performance testing. Through the quality inspection of motor products by the Jiangsu Provincial Quality and Technical Supervision Department, it meets the national technical performance indicators, has excellent product quality, and the factory pass rate of the product reaches 100%. There are no major quality problem complaints, and customers deeply trust it. At the same time, a sound and comprehensive after-sales service management system has been established, with sales service outlets in major and medium-sized cities in China continuously increasing market coverage and customer satisfaction.

Our factory