박차 기어

Spur gears are a type of cylindrical gear, with shafts that are parallel and coplanar, and teeth that are straight and oriented parallel to the shafts. They’re arguably the simplest and most common type of gear - easy to manufacture and suitable for an array of applications.

One's teeth of a spur gear have got an involute profile and mesh one tooth at the same time. The involute type implies that spur gears just generate radial forces (no axial forces), however the approach to tooth meshing causes high pressure on the gear the teeth and high noise creation. For this reason, spur gears are usually used for lower swiftness applications, although they can be utilized at nearly every speed.

An involute equipment tooth includes a profile this is the involute of a circle, which implies that since two gears mesh, they get in touch with at an individual point where in fact the involutes meet. This aspect movements along the tooth areas as the gears rotate, and the type of force ( referred to as the line of actions ) is tangent to both base circles. Hence, the gears stick to the fundamental regulation of gearing, which claims that the ratio of the gears’ angular velocities must stay continuous throughout the mesh.

Spur gears could be produced from metals such as for example metal or brass, or from plastics such as for example nylon or polycarbonate. Gears manufactured from plastic produce less sound, but at the trouble of power and loading capacity. Unlike other equipment types, spur gears don’t encounter high losses because of slippage, so they often have high transmission performance. Multiple spur gears can be utilized in series ( known as a gear teach ) to attain large reduction ratios.

There are two primary types of spur gears: external and internal. Exterior gears have the teeth that are cut externally surface area of the cylinder. Two external gears mesh with each other and rotate in opposite directions. Internal gears, in contrast, have teeth that are cut on the inside surface of the cylinder. An external gear sits inside the internal gear, and the gears rotate in the same direction. Because the shafts are positioned closer together, internal gear assemblies are more compact than external gear assemblies. Internal gears are primarily used for planetary gear drives.

Spur gears are generally seen as best for applications that require speed reduction and torque multiplication, such as ball mills and crushing gear. Examples of high- velocity applications that use spur gears - despite their high noise levels - include consumer appliances such as washing machines and blenders. And while noise limits the use of spur gears in passenger automobiles, they are often used in aircraft engines, trains, and even bicycles.