ডিফারেনশিয়াল গিয়ার
Differential gear, in automotive mechanics, gear arrangement that permits power from the engine to be transmitted to a pair of driving wheels, dividing the force equally between them but permitting them to follow paths of different lengths, as when turning a corner or traversing an uneven road….
Differential gear, in automotive mechanics, gear arrangement that permits power from the engine to be transmitted to a pair of driving wheels, dividing the force equally between them but permitting them to follow paths of different lengths, as when turning a corner or traversing an uneven road. On a straight road the wheels rotate at the same speed; when turning a corner the outside wheel has farther to go and will turn faster than the inner wheel if unrestrained.
The elements of the Ever-Power differential are shown in the Figure. The power from the transmission is delivered to the bevel ring gear by the drive-shaft pinion, both of which are held in bearings in the rear-axle housing. The case is an open boxlike structure that is bolted to the ring gear and contains bearings to support one or two pairs of diametrically opposite differential bevel pinions. Each wheel axle is attached to a differential side gear, which meshes with the differential pinions. On a straight road the wheels and the side gears rotate at the same speed, there is no relative motion between the differential side gears and pinions, and they all rotate as a unit with the case and ring gear. If the vehicle turns to the left, the right-hand wheel will be forced to rotate faster than the left-hand wheel, and the side gears and the pinions will rotate relative to one another. The ring gear rotates at a speed that is equal to the mean speed of the left and right wheels. If the wheels are jacked up with the transmission in neutral and one of the wheels is turned, the opposite wheel will turn in the opposite direction at the same speed.
এভার-পাওয়ার ডিফারেনশিয়ালের মাধ্যমে দুটি চাকায় সঞ্চারিত টর্ক (ঘূর্ণন বল) একই থাকে। ফলে, বরফ বা কাদার মতো পরিস্থিতিতে যদি একটি চাকা পিছলে যায়, তবে অন্য চাকাটির টর্ক কমে যায়। লিমিটেড-স্লিপ ডিফারেনশিয়াল ব্যবহারের মাধ্যমে এই অসুবিধা কিছুটা কাটিয়ে ওঠা যায়। এর একটি সংস্করণে, একটি ক্লাচ অ্যাক্সেলগুলোর একটি এবং রিং গিয়ারকে সংযুক্ত করে। যখন কোনো একটি চাকায় আকর্ষণ বল কমে যায়, তখন ক্লাচটি তার ঘোরার প্রবণতাকে প্রতিরোধ করে, যার ফলে অন্য চাকাটির জন্য আরও বেশি টর্ক সরবরাহ হয়।

পণ্যের দ্রুত বিস্তারিত:
- স্ট্যান্ডার্ড এবং অ-মানক উপলব্ধ
- উচ্চ মানের এবং প্রতিযোগী মূল্য সঙ্গে
- প্রম্পট ডেলিভারি
- গ্রাহকের চাহিদা অনুযায়ী প্যাকিং।
আমরা চীনে উচ্চ মানের দ্বারা সেরা মূল্য অফার করবে প্রতিশ্রুতি! আমরা পণ্য সম্পর্কে বিশেষ আদেশ গ্রহণ. যদি তুমি আমাদের পণ্যে আগ্রহি হও। দয়া করে আমাদের জানাতে দ্বিধা করবেন না। আমরা আপনাকে বিস্তারিত তথ্য দিতে পেরে আনন্দিত। আমরা প্রতিশ্রুতি দিচ্ছি যে আমাদের পণ্যগুলি নিরাপত্তা এবং উচ্চ মানের এবং যুক্তিসঙ্গত মূল্যে ছিল। আপনি যদি আমাদের পণ্য আগ্রহী হন, আমাদের সাথে যোগাযোগ করুন asap.We আন্তরিকভাবে আপনার সহযোগিতার জন্য খুঁজছেন হয়.
আমাদের বেশিরভাগ পণ্য ইউরোপ বা আমেরিকাতে রপ্তানি করা হয়, উভয় মানক এবং অমানক পণ্য উপলব্ধ। আমরা আপনার অঙ্কন বা নমুনা অনুযায়ী উত্পাদন করতে পারেন. উপাদান মান বা আপনার বিশেষ অনুরোধ অনুযায়ী হতে পারে. আপনি যদি আমাদের চয়ন করেন, আপনি নির্ভরযোগ্য চয়ন করুন.

উপকরণ উপলব্ধ
1. স্টেইনলেস স্টীল: SS201, SS303, SS304, SS316, SS416, SS420
2. ইস্পাত: C45(K1045), C46(K1046), C20
3. পিতল
4. ব্রোঞ্জ: C51000, C52100, C54400, ইত্যাদি
5. আয়রন: 1213, 12L14,1215
6. অ্যালুমিনিয়াম: Al6061, Al6063
7. আপনার অনুরোধ অনুযায়ী OEM
সারফেস ট্রিটমেন্ট
অ্যানিলিং, ন্যাচারাল ক্যানোনাইজেশন, হিট ট্রিটমেন্ট, পলিশিং, নিকেল প্লেটিং, ক্রোম প্লেটিং, জিঙ্ক প্লেটিং, হলুদ প্যাসিভাইজেশন, গোল্ড প্যাসিভাইজেশন, সাটিন, ব্ল্যাক সারফেস পেইন্ট করা ইত্যাদি।
প্রক্রিয়াকরণ পদ্ধতি
সিএনসি মেশিনিং, পাঞ্চ, টার্নিং, মিলিং, ড্রিলিং, গ্রাইন্ডিং, ব্রোচিং, ওয়েল্ডিং এবং সমাবেশ
QC এবং সার্টিফিকেট
প্রযুক্তিবিদরা উৎপাদনে স্ব-চেক করুন, পেশাদার গুণমান পরিদর্শক দ্বারা প্যাকেজের আগে চূড়ান্ত-চেক করুন
ISO9001:2008, ISO14001:2001,ISO/TS 16949:2009
প্যাকেজ এবং সীসা সময়
আকার: অঙ্কন
কাঠের কেস/কন্টেইনার এবং প্যালেট, বা কাস্টমাইজড স্পেসিফিকেশন অনুযায়ী।
15-25 দিনের নমুনা। 30-45 দিনের অফিসিয়াল অর্ডার
বন্দর: সাংহাই/নিংবো বন্দর






