用于PTO传动轴的棘轮扭矩限制器SA系列
A ratchet torque limiter is a device that interrupts power transmission in the event of a torque spike or overload exceeding the setting. After removing the cause of the overload, the torque limiter will automatically re-engage. Ratchet torque limiters are typically used to protect appliances subjected to constant or alternating torque from overloads.
用于PTO传动轴的棘轮扭矩限制器SA系列
A ratchet torque limiter is a device that interrupts power transmission in the event of a torque spike or overload exceeding the setting. After removing the cause of the overload, the torque limiter will automatically re-engage. Ratchet torque limiters are typically used to protect appliances subjected to constant or alternating torque from overloads.
SA1 Series Ratchet Torque Limiter

| 系列 | Max Torque(Nm) | Spline | A(毫米) | 宽度(毫米) |
| 1SA1 | 400 | 1 3/8" Z6 | 138 | 21 |
| 2SA1 | 138 | |||
| 3SA1 | 149 | |||
| 4SA1 | 150 |

- 卡环
- 挡圈
- Dust guard ring
- Pushpin kit
- 中心
- Pawl kit(Qty=8)
- 带轭的住房
- 润滑脂嘴

| 系列 | Setting Torque(nm) | Spline(female) | Spline(male) | A(毫米) | 宽度(毫米) | C(mm) |
| SAS1 | 400 | 1 3/8'' Z6 | 1 3/8'' Z6 | 144 | 21 | 38 |

- 卡环
- 挡圈
- Dust guard ring
- Pushpin kit
- 中心
- Pawl kit(Qty=8)
- 带轭的住房
- 润滑脂嘴
SA2 Series Ratchet Torque Limiter

| 系列 | Max Torque(Nm) | Spline | A(毫米) | 宽度(毫米) |
| 1SA2 | 800 | 1 3/8" Z6 | 156 | 21 |
| 2SA2 | 156 | |||
| 3SA2 | 167 | |||
| 4SA2 | 168 | |||
| 5SA2 | 172 | |||
| 6SA2 | 178 | |||
| 7SA2 | 189 | |||
| 7NSA2 | 175 | |||
| 8SA2 | 189 |

- 卡环
- 挡圈
- Dust guard ring
- Pushpin kit
- 中心
- Pawl kit(Qty=16)
- 带轭的住房
- 润滑脂嘴

| 系列 | Setting Torque(nm) | Spline(female) | Spline(male) | A(毫米) | 宽度(毫米) | C(mm) |
| SAS2 | 800 | 1 3/8'' Z6 | 1 3/8'' Z6 | 161 | 21 | 38 |

- 卡环
- 挡圈
- Dust guard ring
- Pushpin kit
- 中心
- Pawl kit(Qty=16)
- 带轭的住房
- 润滑脂嘴
SA3 Series Ratchet Torque Limiter

| 系列 | Max Torque(Nm) | Spline | A(毫米) | 宽度(毫米) |
| 2SA3 | 1200 | 1 3/8" Z6 | 171 | 22 |
| 3SA3 | 182 | |||
| 4SA3 | 183 | |||
| 5SA3 | 187 | |||
| 6SA3 | 193 | |||
| 7SA3 | 204 | |||
| 7NSA3 | 190 | |||
| 8SA3 | 204 |

- 卡环
- 挡圈
- Dust guard ring
- Pushpin kit
- 中心
- Pawl kit(Qty=24)
- 带轭的住房
- 润滑脂嘴

| 系列 | Setting Torque(nm) | Spline(female) | Spline(male) | A(毫米) | 宽度(毫米) | C(mm) |
| SAS3 | 1200 | 1 3/8'' Z6 | 1 3/8'' Z6 | 164.5 | 22 | 38 |

- 卡环
- 挡圈
- Dust guard ring
- Pushpin kit
- 中心
- Pawl kit(Qty=24)
- 带轭的住房
- 润滑脂嘴
SA4 Series Ratchet Torque Limiter

| 系列 | Max Torque(Nm) | Spline | A(毫米) | 宽度(毫米) |
| 5SA4 | 1600 | 1 3/8" Z6 | 206 | 22 |
| 6SA4 | 212 | 22 |

- 卡环
- 挡圈
- Dust guard ring
- Pushpin kit
- 中心
- Pawl kit(Qty=32)
- 带轭的住房
- 润滑脂嘴

| 系列 | Setting Torque(nm) | Spline(female) | Spline(male) | A(毫米) | 宽度(毫米) | C(mm) |
| SAS4 | 1600 | 1 3/8'' Z6 | 1 3/8'' Z6 | 186 | 22 | 38 |

- 卡环
- 挡圈
- Dust guard ring
- Pushpin kit
- 中心
- Pawl kit(Qty=32)
- 带轭的住房
- 润滑脂嘴
SA5 Series Ratchet Torque Limiter

| 系列 | Max Torque(Nm) | Spline | A(毫米) | 宽度(毫米) |
| 6SA5 | 2000 | 1 3/8" Z6 | 231 | 22 |

- 卡环
- 挡圈
- Dust guard ring
- Pushpin kit
- 中心
- Pawl kit(Qty=40)
- 带轭的住房
- 润滑脂嘴

| 系列 | Setting Torque(nm) | Spline(female) | Spline(male) | A(毫米) | 宽度(毫米) | C(mm) |
| SAS5 | 2000 | 1 3/8'' Z6 | 1 3/8'' Z6 | 205 | 22 | 38 |

- 卡环
- 挡圈
- Dust guard ring
- Pushpin kit
- 中心
- Pawl kit(Qty=40)
- 带轭的住房
- 润滑脂嘴
Advantages of Ratchet Torque Limiter
One of the biggest advantages of ratchet torque limiters is that they protect against overload. They work in a similar way to a 1:1 transmission when the torque is less than a predetermined value. Once the torque exceeds the limit, the limiter acts as a clutch and removes inertial energy from the drive train. They operate in milliseconds, making them suitable for a wide range of applications, including conveyors, assembly lines, textile machinery, and printing machines.
这种扭矩限制器通常由硬化钢制成,无间隙。它具有用于调节限位的附加弹簧。它有多种型号,包括气动、液压和机械。根据扭矩限制器的用途,它可以安装在不同的位置。正常使用时,无需对其进行调整。发生故障时,用户只需断开螺旋钻,即可恢复 PTO 功能。
One of the advantages of the ratchet torque limiters for PTO驱动轴 is that they don't waste any energy, allowing you to tow the vehicle. Without this technology, towing would be impossible. Besides, a PTO ratchet torque limiter is more durable than a manual limiter.
Another major benefit of a PTO ratchet torque limiter is that it offers a safety measure if a PTO-driven implement jams. A small farm tractor can give up when running at 3800 RPM, and if it suddenly stops, the PTO shaft can also fail. The torque limiting device is the first line of defense against such catastrophic failures, and this slip clutch device eliminates the need to change pins.
As a mature PTO shaft supplier, Ever-power offers torque limiters including the shear bolt torque limiter, 这 PTO超速离合器, etc., besides ratchet torque limiters. Contact us now to get more information!

其他信息
| 编辑 | Zqq |
|---|
产品快速详细信息:
- 有标准的和非标准的
- 具有高质量和有竞争力的价格
- 及时交付
- 按照客户的要求进行包装。
我们承诺将以最优惠的价格提供高质量的中国产品!我们也接受关于产品的特殊订单。如果你对我们的产品感兴趣。请不要犹豫,让我们知道。我们很高兴给你详细的信息。我们承诺,我们的产品将是安全的,是在高品质和合理的价格。如果您对我们的产品感兴趣,请尽快与我们联系,我们真诚地期待您的合作。
我们的大部分产品都出口到欧洲或美洲,标准和非标准产品都有。我们可以根据你的图纸或样品进行生产。材料可以是标准的,也可以按照你的特殊要求。如果你选择我们,你就选择了可靠。

可用的材料
1.不锈钢:SS201, SS303, SS304, SS316, SS416, SS420
2.Steel:C45(K1045), C46(K1046),C20
3.黄铜:C36000(C26800),C37700(HPb59),C38500(HPb58),C27200(CuZn37),C28000(CuZn40)。
4.青铜:C51000、C52100、C54400等
5.铁:1213,12L14,1215
6.铝:Al6061, Al6063
7.根据您的要求进行OEM
表面处理
退火、自然光化、热处理、抛光、镀镍、镀铬、镀锌、黄色钝化、金色钝化、缎面、黑色表面油漆等。
处理方法
数控加工、冲、车、铣、钻、磨、拉、焊和装配
质量控制和证书
技术人员在生产中进行自我检查,在包装前由专业的质量检查员进行最后检查。
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
包装和交货时间
尺寸:图纸
木箱/集装箱和托盘,或按客户要求的规格。
15-25天样品。30-45天完成正式订单
港口:上海/宁波港






