TYP2系列超高效变频永磁同步电机价格出售

The TYP2 series ultra-efficient three-phase variable frequency permanent magnet synchronous motor must be used with a vector frequency converter. The rotor of this series of engines adopts a built-in permanent magnet structure, which has a specific convex torque. The frequency converter equipped with the maximum torque current ratio control method ensures that this series of motors has a high power factor, low no-load current, working current, and low copper consumption throughout the entire speed range. After embedding a permanent magnet in the rotor, the rotor and stator magnetic field operate synchronously during regular operation. The rotor winding has no induced current and no rotor resistance or hysteresis loss, which improves the motor's efficiency. When the engine operates at a load of 35% -120%, the efficiency and power factor are both high, and the energy-saving effect is noticeable. The TYP2 series ultra-efficient three-phase variable frequency permanent magnet synchronous motor is widely used in places such as fans, water pumps, injection molding machines, wire drawing machines, extruders, air compressors, piping equipment, pharmaceutical equipment, etc. The TYP series ultra-efficient three-phase variable frequency permanent magnet synchronous motors produced by our company can be divided into modified models (equivalent to the installation size of YE2 three-phase asynchronous motors) and high power density (capable of reducing 1-3 frame numbers) according to installation dimensions. It can meet the needs of energy-saving renovation projects and new development projects for three-phase asynchronous motors in the stock market under the background of carbon peaking and carbon neutrality.

安装形式
5种基本结构类型
B3：有底座、端盖无凸缘的结构型式。
B5：座机无底座，端盖上有凸缘（带通孔）。
B35：底座带底脚，端盖上装有法兰（带通孔）。
B34：底座带底脚，端盖带法兰（带螺丝孔）。

B14：机座无底脚，端盖带有法兰（带螺丝孔）结构。
电机的安装方式符合IEC60034-7的规定，其结构型式如下图所示

Bearing selection

出线螺丝孔

性能数据

注：1）DH尺寸只有出口电机要求，国内用户应按订货要求进行配置。

2）D尺寸公差：φ19-28为j6；φ38-48为K6；φ55-80为m6；φ95为m6。

注：1) R是法兰安装面至辅肩的距离。

2) DH尺寸只有出口电机要求，国内用户应按订货要求进行规格。

3) D尺寸公差：φ19-28为j6；φ38-48为K6；φ55-80为m6；φ95为m6。

4) N尺寸公差为j6。

注：1) R是法兰安装面至辅肩的距离。

2) DH尺寸只有出口电机要求，国内用户应按订货要求进行规格。

3) D尺寸公差：φ19-28为j6；φ38-48为K6；φ55-80为m6；φ95为m6。

注：1) R是法兰安装面至辅肩的距离。

2) DH尺寸只有出口电机要求，国内用户应按订货要求进行规格。

3) D尺寸公差：φ19-28为j6；φ38-48为K6；φ55-80为m6；φ95为m6。

永磁同步电动机如何安装？

安装永磁同步电机 (PMSM) 时需要格外小心，以确保正确安装和安全运行。以下是指导您完成安装过程的常规步骤：

1. **准备和安全措施：**
- Before installing the PMSM, ensure that you have read and understood the manufacturer's installation instructions and safety guidelines.
- Ensure that the power supply is disconnected and locked out to prevent accidental energization during the installation process.
- Use personal protective equipment (PPE) such as gloves and safety glasses to protect yourself during the installation.

2. **安装电机：**
- Select a suitable location for the motor installation, considering factors such as ventilation, accessibility for maintenance, and the motor's weight.
- Follow the manufacturer's recommendations for mounting the motor, which may involve using mounting brackets or a motor base.
- Ensure that the motor is securely fastened to the mounting surface, using appropriate bolts or screws.

3. **电气连接：**
- Follow the electrical wiring diagram provided by the manufacturer to make the necessary connections.
- Connect the motor's power cables to the appropriate terminals, ensuring proper polarity and tight connections.
- If required, connect the motor to a motor controller or variable frequency drive (VFD) according to the manufacturer's instructions.
- Provide proper grounding for the motor, following applicable electrical codes and regulations.

4. **冷却和通风：**
- PMSMs generate heat during operation, so ensure adequate cooling and ventilation for the motor.
- Follow the manufacturer's guidelines regarding minimum clearance distances around the motor and the use of cooling fans or other cooling systems, if required.

5. **调试和测试：**
- After installing the motor, perform thorough checks to ensure proper installation and functionality.
- Verify that all electrical connections are secure and properly insulated.
- Gradually apply power to the motor while monitoring its operation for any unusual noises or vibrations.
- Test the motor under various load conditions to ensure it performs as expected.
- If applicable, configure and calibrate the motor controller or VFD to optimize the motor's performance.

6. **维护和安全检查：**
- Regularly inspect the motor for wear, damage, or loose connections.
- Follow the manufacturer's recommended maintenance schedule for lubrication, cleaning, and other maintenance tasks.
- Implement safety measures such as lockout/tagout procedures when performing maintenance on the motor.

请注意，这些步骤仅概述了安装过程。请务必参考您正在安装的永磁同步电机制造商提供的具体安装和安全指南。

Every power company can produce over 1500 AC and DC motor product specifications in 18 series. We have 156 sets of main production equipment, including 6 workshops for stamping, laminating, metalworking, winding, embedding, and final assembly. The main components include organic seats, main and pole-changing iron cores, main and pole-changing coils, armatures, end covers, brush holders, and external constituents. The entire manufacturing process of the motor is mainly completed through key functions such as welding, dynamic balancing, painting, and performance testing. Through the quality inspection of motor products by the Jiangsu Provincial Quality and Technical Supervision Department, it meets the national technical performance indicators, has excellent product quality, and the factory pass rate of the product reaches 100%. There are no major quality problem complaints, and customers deeply trust it. At the same time, a sound and comprehensive after-sales service management system has been established, with sales service outlets in major and medium-sized cities in China continuously increasing market coverage and customer satisfaction.

我们的工厂