EP-RC51农用割草机齿轮箱
We supply different power Agricultural gearboxes, also we could offer OEM/ ODM service according to your drawing / sample.RG series have the features of high versatility,good combination and heavy loading capability, along with other merits such as easy to attain various transmission ratios, high efficiency.We supply different power Agricultural gearboxes, also we could offer OEM/ ODM service according to your drawing / sample.
1.We have 20 years ODM &OEM experience for gearbox
2.Goods 100% be tested before shippment
3.24 Hours for services
4.ODM & OEM: The technology Dpt. Can R&D new mould according to customer’s requirement.
5.The favorable factory price
6.Package and Brand can be Customized
EP-RC51农用割草机齿轮箱

| 项目 | EP-RC51 Lawn Mower Gearbox |
| 比率 | 1:1.47/1:1.93 |
| 牙齿 | 22/15 29/15 |
| 模块 | 5.08 /4.0 |
| 功率(HP) | 30 |
| 额定输入 | 540rpm |
| 输入/输出描述 | Spline /Taper spline |
| 重量(N.W) | 29KG |
We supply different power Agricultural gearboxes, also we could offer OEM/ ODM service according to your drawing / sample.RG series have the features of high versatility,good combination and heavy loading capability, along with other merits such as easy to attain various transmission ratios, high efficiency.We supply different power Agricultural gearboxes, also we could offer OEM/ ODM service according to your drawing / sample.
1.We have 20 years ODM &OEM experience for gearbox
2.Goods 100% be tested before shippment
3.24 Hours for services
4.ODM & OEM: The technology Dpt. Can R&D new mould according to customer's requirement.
5.The favorable factory price
6.Package and Brand can be Customized

Lawn Mower Gearbox Lubrication Instructions:
NOTE: These instructions apply to all Mower decks with gear-driven blades. For the mower with belt-driven blades, see Mower Deck Lubrication in this section.
Lawn Mower Gearbox (Tee Gearbox and Blade drive gearbox) connected as an integral component, Oil flows freely between them.
这类 农用齿轮箱 is permanently lubricated (oil-filled) and sealed and does not require periodic lubrication.
However, the transmission oil seal should be checked every 25 hours for signs of oil spills; In particular, the lower seal of the blade drive gearbox should be checked, Because they operate in a dirty environment.

If oil leaks are found, replace the oil seals and relubricate the gearbox assembly as follows:
1. Remove the Lawn Mower Gearbox cover (foot pedal). deck direction Should be in the normal operating position.
2. Clean the area around a single Lawn Mower Gearbox Cover to prevent contamination from entering Gearbox.
3. Remove the fixing Screws for blade drive gearbox cover.
4. Check the lubricant level in the gearbox. if Insufficient lubricating oil, please add SAE EP (extremely pressure) 90W oil until the oil level reaches (submerged) Horizontal shaft in gearbox (the axis is parallel to the cover).
NOTE: If the gearbox is fully Drain the oil, about 5 fl. oz (15 cl) oil per gearbox to refill the gear drive components.
Note: Due to the gearbox
It is connected as a unit by connecting pipes, so it is necessary to add Grease slowly. Wait a few minutes after adding oil , allowing the oil to flow throughout the assembly, and Allow oil level to stabilize before reassembly.
Important: Do not overfill the Lawn Mower Gearbox. The gearbox assembly has no exhaust. Filling up the fuel can cause excessive pressure , resulting in an oil leak.
5. Check the condition of the cover gasket, Replace if worn or damaged. Reinstall the transmission cover ;Tighten the screws to 24 in-lb (2.7 N⋅m).
PTO Shafts for Agricultural Gearboxes are Available.
农业机械包含多种动力输出轴(PTO轴)。每根动力输出轴两端均通过轭架连接,转速在540至1000转/分之间。动力输出轴两端通常安装安全护罩,以保护操作人员。这些防护护罩也应用于拖拉机和农具中,确保动力输出轴发挥最大效率。此外,使用内部轭架也进一步提高了安全性。
ǞǞǞ 农业动力输出轴变速箱 is designed to change the output speed of a PTO 拖拉机传动轴它可以作为减速齿轮箱或加速齿轮箱使用。作为减速齿轮箱时,它可以将动力输出轴的转速从 1000 rpm 降低到 540 rpm,从而使您可以使用设计转速为 540 rpm 的设备。另一方面,作为加速齿轮箱时,它可以将动力输出轴的转速从 540 rpm 提高到 1000 rpm。



农业变速箱定制服务
Our Lawn Mower Gearbox has many items for your choice and we can produce as per your drawing or sample to meet your special request.
其他农业齿轮箱
农业齿轮箱生产车间
杭州恒力传动机械有限公司成立于2006年。公司位于浙江杭州,现有员工90人,占地面积3800米,年产值达4000万元。公司致力于各种齿轮箱、减速机、工程机械的研发、制造和人员培训,包括螺旋锥齿轮箱、直齿轮箱、 蜗杆齿轮箱,以及圆柱形齿轮箱。它还包括各种高压铸造阀体和外壳产品。其产品被用于各种应用,如农业割草机、扫雪机、施肥机、谷物输送机、工业设备、石油开采机械、海洋工业设备和工程液压部件。其95%以上的产品出口到欧洲、美国和澳大利亚。亚洲和加拿大。公司拥有强大的技术和研发能力,生产可靠的高品质产品,追求独特的经营理念,在制造业中享有很高的声誉。欢迎通过电话或电子邮件与我们联系。

产品快速详细信息:
- 有标准的和非标准的
- 具有高质量和有竞争力的价格
- 及时交付
- 按照客户的要求进行包装。
我们承诺将以最优惠的价格提供高质量的中国产品!我们也接受关于产品的特殊订单。如果你对我们的产品感兴趣。请不要犹豫,让我们知道。我们很高兴给你详细的信息。我们承诺,我们的产品将是安全的,是在高品质和合理的价格。如果您对我们的产品感兴趣,请尽快与我们联系,我们真诚地期待您的合作。
我们的大部分产品都出口到欧洲或美洲,标准和非标准产品都有。我们可以根据你的图纸或样品进行生产。材料可以是标准的,也可以按照你的特殊要求。如果你选择我们,你就选择了可靠。

可用的材料
1.不锈钢:SS201, SS303, SS304, SS316, SS416, SS420
2.Steel:C45(K1045), C46(K1046),C20
3.黄铜:C36000(C26800),C37700(HPb59),C38500(HPb58),C27200(CuZn37),C28000(CuZn40)。
4.青铜:C51000、C52100、C54400等
5.铁:1213,12L14,1215
6.铝:Al6061, Al6063
7.根据您的要求进行OEM
表面处理
退火、自然光化、热处理、抛光、镀镍、镀铬、镀锌、黄色钝化、金色钝化、缎面、黑色表面油漆等。
处理方法
数控加工、冲、车、铣、钻、磨、拉、焊和装配
质量控制和证书
技术人员在生产中进行自我检查,在包装前由专业的质量检查员进行最后检查。
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009
包装和交货时间
尺寸:图纸
木箱/集装箱和托盘,或按客户要求的规格。
15-25天样品。30-45天完成正式订单
港口:上海/宁波港








