R1 분할 테이퍼 부싱

Split taper bushings are flanged metal parts that mount pulleys and sprockets to shafts. Their flanged design and double-section steel construction allow them to withstand the high torques required for power transmission applications. The split taper adjusts the shaft diameter, while the keyway ensures a firm hold. The split taper design allows interchangeability between manufacturers.
When looking for replacement parts for cast iron bushing bore pulleys, you should consider a split tapered bushing. These parts fit into the shaft of the 3/4" diameter pulley. You can buy split tapered bushings on the same page as the pulley. When purchasing a divided tapered bushing, remember to measure the diameter of the shaft to determine the size you need.

Dimensions of the R1 Split Taper Bushings

• Bushing Type: R1
• Bore Size: 1-1/16"、1-1/4"、1-1/8"、1-3/16"、1-3/8"、1-7/16"、28mm、3-11/16"、3-3/16"、30mm、32mm、35mm、36mm、38mm、39mm、40mm、42mm、45mm、48mm、50mm、55mm、60mm、65mm、70mm、75mm、85mm、90mm、95mm
• Dimension (L): 2-7/8"
• Dimension (U): 5/8"
• Dimension (T): 2-1/4"
• Dimension (D): 2.875"
• Dimension (H): 5-3/8"
• Dimension (V): 4-5/8"
• 크기(너비): 3/4인치
• Dimension (X): 2"
• Dimension (Y): 1/4"
• 치수(R): 1/4"
• Dimension (S): 9/32"
• 캡 스크류 개수: 3개
• Cap Screw Size: 3/8" X 1-3/4"
• Wrench Torque: 348 LBS
• Weight: 7.5 LBS

application of split taper bushing

This market report categorizes the Split Taper Bushing market by manufacturers, type, application, and region. It provides insight into the competitive landscape, marketing channels, and product positioning. It also provides an insider's view of existing and emerging competitors in the market. It examines local market demand, regional production and sales, downstream buyers, and import and export activities. The report also provides recommendations for new market entrants.
Another application for split tapered bushings is the installation of pulleys, sprockets, pulleys, and other drive components. These tapered bushings have a split barrel, which allows them to fit any shaft diameter without the need to drill holes perfectly to match the assembly. The split taper feature reduces friction between shaft surfaces. The company offers custom and standard split tapered bushings with competitive prices and high-quality service.
When installing split tapered bushings, use an anti-seize compound or grease in the holes. It will prevent corrosion and contaminants from entering the casing. To remove the split tapered bushing, loosen the hardware and place a wedge between the hub and bushing flange. Apply the appropriate torque required to install the split tapered bushing. Do not over-tighten or over-tighten the hardware. The result can be damaged parts and improper alignment.
Split tapered bushings are designed for use with cast iron bushing bore pulleys. You can purchase split taper sleeves on the same page where you purchased pulleys. Bushings are only available in 1/2'' shaft size. If you don't have a 1/2" shaft, you'll need two. These split tapers can be mounted on shafts up to 1/2".

설치

1. 1. 부싱 콘과 구동 제품의 내부가 깨끗하고 고착 방지 윤활제가 없는지 확인합니다.
2. 부싱을 스프라켓 또는 부싱을 장착할 수 있는 다른 부품 유형에 넣습니다.
3. 캡 나사를 풀업 구멍에 느슨하게 끼웁니다. 샤프트에 미끄러지지 않도록 부싱을 느슨하게 유지합니다.
4. Using the key on the shaft, slide the sprocket or other part type to the desired position on the post. Make sure the heads of the cap screws are accessible.
5. Align the sprockets or part types; alternately and incrementally tighten the screws until they are taut. Do not use extensions on the wrench handle; do not allow sprockets or parts to be pulled out and contact the bushing flange. There should be a gap between the bushing flange and the sprocket at this point to ensure that the hole does not close.

제거

1. 캡 나사를 풀고 제거합니다.
2. 캡 나사를 나사산 제거 구멍에 삽입합니다.
3. 스프라켓 또는 기타 부품 유형이 샤프트에서 느슨해질 때까지 삽입된 나사를 조입니다.
4. 4. 샤프트에서 스프라켓/부품 유형을 제거합니다.

원하는 제품을 클릭하여 더 많은 제품을 확인하세요.

Q1. 공장인가요?
A. 네. 우리는 15년 이상의 제조 경험을 가진 공장입니다.

Q2. OEM 및 ODM 서비스를 이용할 수 있나요?

A. 물론입니다. 우리는 OEM 및 ODM 서비스 분야에서 다년간의 경험을 가지고 있습니다.

Q3. 다른 공급업체로부터 제품을 구매하고 있지만 더 나은 서비스가 필요합니다. 내가 지불하는 가격과 일치하거나 그 이상을 주실 수 있나요?
A. We always feel we provide the best service and competitive prices. We would be happy to personalize a competitive quote for you. Email us.