파일럿 보어 타이밍 풀리

동기식 드라이브용
Toothed belts and pulleys are of major importance in synchronous drives based on flexible components.
These components enable problems to be overcome efficiently and very economically, problems that would otherwise require the use of kinematic motion gearing or transmissions with articulated link chains.
In fact, the performance provided by synchronous belt drives is analogous to the characteristic performance of both chains and gearing however belts and pulleys by comparison have additional advantages deriving from their structural features.
이처럼 다양한 용도로 활용될 수 있는 것은 기본적으로 모든 톱니 벨트 동기 구동 장치에 공통적인 작동 특성 때문이며, 이러한 특성은 다음과 같이 요약할 수 있습니다.

- Transmission of absolute asynchronous motion due to the com plete absence of slipping.
- Regular and constant motion, since the toothed belt is free from polygonal winding and the consequent speed variation typical of chain transmissions.
- Non-extendable belt that transmits the motion without significant stretching and therefore without lost motion.
- Moderate assembly pre-tension, since adhesion is not required between the belt and the pulley.
- Minimum radial load on the shafts and on the bearings.
- High capacity to transmit power and high torques at low speed.
- Silent running, good performance, minimum overall dimensions and limited maintenance requirements.

동기식 동력 전달 장치의 품질은 벨트와 풀리의 특성에 똑같이 좌우되므로, 이들은 까다로운 설계 및 제작 기준을 충족해야 합니다.
EVER-POWER 풀리 그룹은 전 세계에서 가장 우수한 벨트 제조업체와의 기술 협력을 통해 최신 표준을 준수하면서 벨트와의 최적의 호환성을 향상시키도록 설계된 다양한 조정을 적용하여 모든 종류의 톱니 풀리를 생산합니다.