מפחית תולעים - החלפת מפחית מותקן על ציר של תיבת הילוכים תולעית סלילית מסדרה C של Fenner - עם מפחית כפולה/משולשת אוגן 873
מבוא
The Worm Reducer-Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer-with Flange Double/Triple Reduction 873 is a high-power and high-efficiency direct drive right angle gearbox with multiple installation options. This gearbox has various transmission ratios ranging from 8:1 to 16,000:1 and can accept standard IEC motors without modification. The modern design and high-quality components make the C series helical worm gearboxes more cost-effective than any other gearbox. The C series provides an efficient and compact solution that can meet most requirements. Our company offers Fenner brand replacement helical worm gearboxes, which are of high quality and competitively priced. It is important to note that our products are replacement parts and not original equipment manufacturer (OEM) parts. If you require OEM parts, please contact the original supplier for purchase. Please see the image of our product below:
מאפיינים
- Transmission ratios ranging from 8:1 to 16,000:1
- Can accept standard IEC motors without modification
- Eight different sizes available
- Hollow bore sizes ranging from 20mm to 90mm
- Highly efficient right angle drive with energy-saving gear transmission and lower operating costs
- ניתן להחלפה עם מוצרים של יצרנים אחרים
- Innovative motor adapter using standard IEC interface
- Oil-free sealed gearbox prevents oil leakage during motor disassembly
- Multiple installation options: base, flange, or shaft mounting
Each feature is further explained below:
Transmission Ratios
The Worm Reducer-Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer-with Flange Double/Triple Reduction 873 has various transmission ratios ranging from 8:1 to 16,000:1. This allows the gearbox to be customized to meet specific torque and speed requirements.
Standard IEC Motors
Our gearbox can accept standard IEC motors without any modification. This allows for easy integration into existing systems and reduces the cost of replacing the motor and gearbox.
Eight Sizes Available
Our gearbox is available in eight different sizes to meet various application requirements. The different sizes allow for greater flexibility in selecting the correct gearbox for your application.
Hollow Bore Sizes
The hollow bore sizes range from 20mm to 90mm. This allows for a wide range of shaft sizes and greater flexibility in selecting the correct gearbox for your application.
Energy-Saving Gear Transmission
Our gearbox features a highly efficient right angle drive. The energy-saving gear transmission reduces operating costs and conserves energy. This reduces the environmental impact of the gearbox and saves money in the long run.
Interchangeable with Other Manufacturers' Products
Our gearbox is interchangeable with products from other manufacturers. This allows for greater flexibility in selecting the correct gearbox for your application while maintaining compatibility with your existing equipment.
Innovative Motor Adapter
Our gearbox features an innovative motor adapter using a standard IEC interface. This allows for easy integration into existing systems and reduces the cost of replacing the motor and gearbox.
Oil-Free Sealed Gearbox
The gearbox is oil-free and sealed to prevent oil leakage during motor disassembly. This prevents environmental pollution and reduces the cost of disposal.
Multiple Installation Options
Our gearbox can be installed in multiple ways, including base, flange, or shaft mounting. This allows for greater flexibility in selecting the correct installation method for your application.
יישומים
The Worm Reducer-Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer-with Flange Double/Triple Reduction 873 is suitable for a wide range of applications, including:
- מסועים
- מיקסרים
- משאבות
- תועמלנים
- מנופים
- ציוד כרייה
- Paper and pulp industry equipment
- ציוד לעיבוד מזון
Each application is further explained below:
מסועים
Our gearbox is suitable for use in conveyor systems. The high torque and low speed transmission ratio make it ideal for applications that require heavy loads to be moved at a slow and steady pace.
מיקסרים
Our gearbox is suitable for use in mixers. The high torque and low speed transmission ratio make it ideal for applications that require high mixing power at low speeds.
משאבות
Our gearbox is suitable for use in pumps. The high torque and low speed transmission ratio make it ideal for applications that require high pumping power at low speeds.
תועמלנים
Our gearbox is suitable for use in agitators. The high torque and low speed transmission ratio make it ideal for applications that require high mixing power at low speeds.
מנופים
Our gearbox is suitable for use in hoists. The high torque and low speed transmission ratio make it ideal for applications that require heavy loads to be lifted at a slow and steady pace.
ציוד כרייה
Our gearbox is suitable for use in mining equipment. The high torque and low speed transmission ratio make it ideal for applications that require heavy loads to be moved at a slow and steady pace.
Paper and Pulp Industry Equipment
Our gearbox is suitable for use in paper and pulp industry equipment. The high torque and low speed transmission ratio make it ideal for applications that require heavy loads to be moved at a slow and steady pace.
ציוד לעיבוד מזון
Our gearbox is suitable for use in food processing equipment. The high torque and low speed transmission ratio make it ideal for applications that require heavy loads to be moved at a slow and steady pace.
החלפת תיבת הילוכים תולעת הסליל של פנר
Our company offers Fenner brand replacement helical worm gearboxes, which are of high quality and competitively priced. It is important to note that our products are replacement parts and not OEM parts. If you require OEM parts, please contact the original supplier for purchase. The benefits of our Fenner Helical Worm Gearbox Replacement include:
- High quality replacement parts at competitive prices
- Interchangeable with Fenner products
- Reduces downtime and lowers maintenance costs
- Minimizes the environmental impact of disposal
Our product is a quality replacement for Fenner helical worm gearboxes. It is designed to be interchangeable with Fenner products and reduce downtime and maintenance costs. Our product is competitively priced and reduces the environmental impact of disposal. Please see the image of our product below:
Installation, Lubrication, and Maintenance
The performance of the Worm Reducer-Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer-with Flange Double/Triple Reduction 873 depends on correct installation, lubrication, and maintenance. Please see the guidelines below:
הַתקָנָה
- Ensure that the shafts and gearbox holes are clean and free of burrs before installing the gear unit
- Apply a sufficient amount of lubricating oil to the shafts and holes to aid in assembly and prevent friction corrosion
- Slide the unit onto the drive shaft and install the key
- For foot mounting, install the device securely on a sturdy structure
- For shaft mounting, use an elastic coupling between the gearbox and the drive shaft
- When installing pulleys or sprockets, install them as close to the gearbox as possible
- Do not strike the shafts when installing or removing the drive components, as this can damage the bearings
סִיכָה
Our gearbox is designed to be maintenance-free and does not require lubrication for the lifetime of the product. However, for gearboxes that operate in explosive environments, the gearbox oil needs to be replaced according to the device's working temperature. For new gearboxes, it is recommended to replace half of the oil after 1000 hours of operation or one year, or when the device's service life expires.
תחזוקה
- Periodically inspect the gearbox for damage, wear, or leaks
- Replace any damaged or worn parts immediately
- Clean the exterior of the gearbox to prevent the buildup of dirt and debris
- Ensure that the gearbox is properly sealed and free of leaks
- Follow the guidelines for installation and lubrication described above
Please see the image of our product below:
בעיות אפשריות ופתרונות
| בְּעָיָה | לִגרוֹם | פִּתָרוֹן |
|---|---|---|
| Excessive vibration or noise | Loose mounting or coupling, worn or damaged gears, incorrect lubrication | Tighten mounting or coupling, replace worn or damaged gears, ensure correct lubrication |
| התחממות יתר | Incorrect lubrication, low oil level, excessive load, or ambient temperature | Ensure correct lubrication, check oil level, reduce load, or lower ambient temperature |
| דליפת שמן | אטמים או אטמים פגומים | החלפת אטמים או אטמים פגומים |
| חוסר יישור פיר | Improper installation or coupling | Realign shafts or replace coupling |
| Insufficient torque or speed | Incorrect transmission ratio or motor size | Adjust transmission ratio or replace motor with correct size |
| Excessive torque or speed | Incorrect transmission ratio or motor size | Adjust transmission ratio or replace motor with correct size |
| יעילות מופחתת | Worn or damaged gears, incorrect lubrication, excessive load | Replace worn or damaged gears, ensure correct lubrication, reduce load |
| Gearbox locked up | Worn or damaged gears, improper lubrication | Replace worn or damaged gears, ensure correct lubrication |
| תגובה מוגזמת | Worn or damaged gears, improper assembly or installation | Replace worn or damaged gears, ensure proper assembly or installation |
| בלאי או נזק מוגזמים להילוכים | Excessive load, improper lubrication, inadequate maintenance | Reduce load, ensure correct lubrication, perform adequate maintenance |
מנועים למפחיתי הילוכים תולעים
The Worm Reducer-Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer-with Flange Double/Triple Reduction 873 is designed to be used with various electric motors. The selection of the appropriate motor is critical to ensure the gearbox's optimal performance. Our company also offers various electric motors for sale, which are compatible with our gearbox. The combination of our gearbox and electric motors provides a high-performance and energy-efficient solution for various applications. Please see the image of our electric motors below:
The relationship between the Worm Reducer-Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer-with Flange Double/Triple Reduction 873 and electric motors is critical to the gearbox's optimal performance. The proper selection of an electric motor that matches the gearbox's specifications is essential. Our company offers a range of electric motors that are compatible with our gearbox. The combination of our gearbox and electric motors provides high-performance and energy-efficient solutions for various applications.
על Ever-power
We are a comprehensive transmission equipment manufacturer that integrates research and development, manufacturing, and sales of speed reducers. With more than 15 years of experience in the design, production, manufacture, and sales of gearboxes, we serve customers in Europe, America, Africa, Asia, and other regions and have won the market's praise. Our consistent mission and vision over the years have led us to introduce advanced production and testing equipment, employ industry professionals and technicians for innovative R&D and manufacturing, and use standardized production management methods to strictly control every aspect of gearbox production. Over the years, we have provided customers with high-quality, high-energy-efficiency, and high-stability production. Our gearboxes are widely used in the equipment industry, food industry, car washing industry, packaging industry, transmission industry, automation industry, solar energy industry, and other industries. We provide our customers with the best service, the highest product quality, and competitive prices. We encourage customers to explore our products and contact us for purchase. Please see the image of our factory below:
שאלות ותשובות
1. What is the transmission ratio of the Worm Reducer-Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer-with Flange Double/Triple Reduction 873?
The transmission ratio of the Worm Reducer-Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer-with Flange Double/Triple Reduction 873 ranges from 8:1 to 16,000:1.
2. Is lubrication required for the Worm Reducer-Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer-with Flange Double/Triple Reduction 873?
Our gearbox is designed to be maintenance-free and does not require lubrication for the lifetime of the product. However, for gearboxes that operate in explosive environments, the gearbox oil needs to be replaced according to the device's working temperature. For new gearboxes, it is recommended to replace half of the oil after 1000 hours of operation or one year, or when the device's service life expires.
3. What is the difference between OEM and replacement parts?
OEM parts are original equipment manufacturer parts that are made by the company that made the equipment. Replacement parts are parts made by a third-party manufacturer that can be used to replace the original part. Our company offers replacement parts for Fenner helical worm gearboxes, which are of high quality and competitively priced. If you require OEM parts, please contact the original supplier for purchase.