Overview of TR060 Series High Precision Planetary Gearbox Right Angle Reducer

TR060 Series High Precision Planetary Gearbox Right Angle Reducer, also known as servo motor planetary gearbox and low backlash planetary gearbox, is a type of gearbox commonly used in industrial automation equipment. It is designed to provide high precision and low backlash in motion control and power transmission applications.

בנייה בסיסית של תיבת הילוכים פלנטרית מדויקת במיוחד

High Precision Planetary Gearbox consists of several components including Sun Gear, Planet Gears, Planet Carrier, Ring Gear/Annulus, Bearings and Shaft System, Housing, Shafts and Keys, and Seals.

סאן גיר

The Sun Gear is located at the center of the gearbox and is usually connected to the input shaft or fixed on the casing as a stationary component.

גלגלי פלנט

Planet Gears rotate around the Sun Gear and are supported and held in relative position by the Planet Carrier. Each Planet Gear meshes with both the Sun Gear and the Ring Gear/Annulus, and they all share and distribute the load when power is input.

נושאת כוכב הלכת

The Planet Carrier is a structure with multiple Planet Gear axle holes that support and allow them to rotate relative to the Sun Gear. The Planet Carrier can serve as an output component or be connected to another shaft to transmit or receive torque.

טבעת הילוך/טבעת

The Ring Gear/Annulus is a large diameter circular gear fixed inside the gearbox casing with teeth on both its inner and outer surfaces that mesh with the Planet Gears. In some applications, the Ring Gear/Annulus can also serve as an input or output end.

מערכת מיסבים וציר

The Bearings and Shaft System in High Precision Planetary Gearbox support the input shaft, output shaft, and Planet Carrier. They ensure the stable rotation and smooth operation of all components.

דיור

The Housing is a sturdy structure that encloses all internal components, providing stable support for the gears and protecting the internal parts from external contamination. It may also include cooling or lubrication systems.

פירים ומפתחות

The input and output shafts are connected to the Sun Gear or Planet Carrier through keys to transmit power and ensure precise torque transmission and axial positioning.

אטמים

Seals prevent lubricating oil leakage and the intrusion of impurities into the gearbox, ensuring cleanliness and good lubrication.

עקרון העבודה של תיבת הילוכים פלנטרית מדויקת במיוחד

The working principle of High Precision Planetary Gearbox is based on torque transfer and amplification, speed and gear ratio control, low backlash characteristic, and dynamic response and stability.

1. Torque Transfer and Amplification: When power is transferred from the input shaft to the Sun Gear, the Sun Gear starts to rotate. The Planet Gears mesh with both the Sun Gear and the Ring Gear/Annulus and begin to revolve and rotate. Due to the combined effect of multiple sets of Planet Gears, the load of the entire system is evenly distributed, resulting in significant torque amplification at the output end.
2. Speed and Gear Ratio Control: By adjusting the gear ratio of the Sun Gear, Planet Gears and Ring Gear/Annulus, the speed relationship and gear ratio between the input and output can be precisely controlled. For example, if there are more Planet Gears or the number of teeth between the Sun Gear and Ring Gear/Annulus differs significantly, the gear ratio increases, the output speed decreases, and the torque correspondingly increases.
3. Low Backlash Characteristic: High Precision Planetary Gearbox pays special attention to reducing or eliminating the clearance between gears, known as "zero/low backlash." This is typically achieved through precision machining, preloading techniques, and component selection to ensure high motion accuracy and smoothness under any load.
4. Dynamic Response and Stability: Due to the even load distribution and multiple contact points, High Precision Planetary Gearbox provides good dynamic performance, including fast response, stable operation, and durability under heavy loads.

שיקולי תכנון ובחירה עבור תיבת הילוכים פלנטרית מדויקת במיוחד

The design and selection of High Precision Planetary Gearbox should consider various factors such as torque requirements, gear ratio, input/output speed, load capacity, and operating environment. Below is a table of the design and selection considerations for High Precision Planetary Gearbox.

יישומים של תיבת הילוכים פלנטרית דיוק גבוהה

High Precision Planetary Gearbox is widely used in various industries, including industrial automation equipment, medical devices, aerospace, precision instruments, automotive manufacturing, and robotics.

1. Servo Motor Systems: High Precision Planetary Gearbox is commonly used in industrial automation equipment for precise speed control and positioning, such as robot joint drives, precision machine tool feed mechanisms, and semiconductor manufacturing equipment.
2. Medical Devices: High Precision Planetary Gearbox is used in high-end medical equipment such as CT scanners, MRI machines, and surgical robots for precise motion control and torque amplification.
3. Aerospace: High Precision Planetary Gearbox is used in aircraft landing gear systems, flight control system actuators, and satellite attitude adjustment devices that require high reliability and precision.
4. Precision Instruments: High Precision Planetary Gearbox is used in scientific experimental equipment, precision measuring instruments, and optical tracking systems that have high demands on transmission accuracy.
5. Automotive Manufacturing: High Precision Planetary Gearbox is used in power steering systems of new energy vehicles, drive units of electric vehicles, and transmission systems of high-performance racing cars.
6. Robotics: High Precision Planetary Gearbox is used in joint drive parts of industrial robots, service robots, and special operation robots.
7. Logistics Automation: High Precision Planetary Gearbox is used in lifters, conveyor belt drives, and AGVs (Automated Guided Vehicles) in automatic warehousing systems.

מבוא לחברה שלנו

Our company is a research, production, and sales-oriented professional manufacturer of power transmission equipment located in Hangzhou, Zhejiang. We strictly operate according to the international quality management system standard ISO90012087 and our products have passed China Compulsory Certification (CCC) and European Community CE certification. Our products are produced according to international IC standards and have reached the advanced level of similar international products.

היתרונות שלנו

1. Advanced Technology: We have advanced technology and strong R&D capabilities, which enable us to produce high-quality power transmission equipment.
2. Strict Quality Control: We have a strict quality control system to ensure the reliability and stability of our products.
3. Professional Team: We have a professional team with rich experience in research, production, and sales of power transmission equipment.
4. Customization Services: We provide customized services to meet the different needs of customers.
5. Timely Delivery: We provide timely delivery to ensure customer satisfaction.
6. Competitive Price: We provide competitive prices to help our customers reduce costs and increase profits.

מחבר: מיה