Sanduku la Gia la Matunda ya Mavuno

Cleaning technology of fruit The working principle of automatic fruit picking is very simple: A roller with rubber fins, taking the fruits from the ground and discharges it out along a trajectory in the container. On the way passing the fruit a sophisticated cleaning system. The fruit is taken…

Cleaning Technology Of Fruit

The working principle of automatic fruit picking is very simple: A roller with rubber fins, taking the fruits from the ground and discharges it out along a trajectory in the container. On the way passing the fruit a sophisticated cleaning system. The fruit is taken without contamination.

Working With The Machine

Collecting is always done from the trunk-outwards. For individual trees in a clockwise direction so that the wheel and the left drive wheel always run outside. In this way, no fruit will be crushed by the wheels. In the cultivation of orchard, rotors can collect in each direction. With a large proportion of leaves or grass mulched much work rate from 0.5 to 3 km / h, since this is the best cleaning quality.

Prevailing Conditions In The Orchard Grass And Plant

Optimal conditions you have, if the grass carpet between 15 and 25 cm high. The operator achieved:

  • Optimal cleaning of fruit (such as cleaned by hand)
  • Long shelf life of fruit
  • Highest degree of collection, bridges the grass contours on uneven ground
  • On slopes the fruit in the grass cover are fixed and can roll it in front of the machine
  • Even in wet weather can very well be picked up

Device Overview Of Feucht Harvester Machines

Designation/
Device type
Upana wa kufanya kaziInjiniPropulsionUzitoLoading volumeUnloading heightPower / hour
OB 50
hand-held
50cmHonda OHV 5,5 PSmechanically with 4 speed gearbox75 kg2x 40 ltr. baskets70cmBis 1,5 Tonnen
OB 70
hand-held
70cmHonda OHV 5,5 PSmechanically with 4 speed gearbox105 kg3x 35 ltr. baskets70cmBis 2,5 Tonnen
OB 80
hand-held
80cm (150cm)Honda OHV 6,5 PSmechanically with 6 speed gearboxKilo 1806x 35 ltr. baskets70cmBis 4 Tonnen
OB 80 Hydro
hand-held
80cm (150cm)Honda OHV 11 PSHydrostatic with variable differential lock195 kg6x 35 ltr. baskets70cmBis 4 Tonnen
OB 100 A
Sitting on machine
100cm (275cm)Briggs & Stratton Vanguard 16 PSHydrostatic all-wheel propulsion510 kg700 ltr. bunker2,50mBis 5 Tonnen
OB 80 Professional
ATo build on the tractor mascine
80cm (250-300cm)accessory equipmentAbout PTO shaft from the tractorKilo 15008000 ltr. Scissors tilt trailer3,2mBis 15 Tonnen
OB Future 2
Fully self-propelled harvester
400cm - 600cmDieselmotor 24 PSHydrostatic infinitely variable-wheel drive with differential lock2300 kg2100 ltr.2,4mBis 10 Tonnen
OB Future 1
Fully self-propelled harvester
400cm - 600cmDieselmotor 90 PSHydrostatic infinitely variable-wheel drive with differential lock9100 kgOverload in the next rowbis 6 mBis 40 Tonnen
Hot Tags: harvest fruits gearbox, China, suppliers, manufacturers, factory, wholesale, buy, made in China

Maelezo ya haraka ya bidhaa:

  • Kawaida na isiyo ya kawaida inapatikana
  • Na ubora wa juu na bei ya ushindani
  • Uwasilishaji wa haraka
  • Ufungaji kulingana na mahitaji ya mteja.

Tunaahidi kutoa bei nzuri kwa ubora wa juu nchini China! Pia tunakubali agizo maalum kuhusu bidhaa. Ikiwa una nia ya bidhaa zetu. Tafadhali usisite kutufahamisha. Tunafurahi kukupa maelezo ya kina. Tunaahidi kwamba bidhaa zetu zingekuwa za usalama na zilikuwa katika ubora wa juu na bei nzuri. Kama una nia ya bidhaa zetu, tafadhali wasiliana nasi asap.We ni dhati kuangalia kwa ushirikiano wako.

Bidhaa zetu nyingi zinasafirishwa kwenda Ulaya au Amerika, bidhaa za kawaida na zisizo za kawaida zinapatikana. Tunaweza kutoa kulingana na mchoro wako au sampuli. Nyenzo inaweza kuwa ya kawaida au kulingana na ombi lako maalum. Ikiwa unatuchagua, unachagua kuaminika.

ripoti ya ubora wa pruduct

Nyenzo Zilizopo

1. Chuma cha pua: SS201, SS303, SS304, SS316, SS416, SS420
2. Chuma:C45(K1045), C46(K1046),C20
3. Shaba:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Shaba: C51000, C52100, C54400, nk
5. Chuma: 1213, 12L14,1215
6. Aluminium: Al6061, Al6063
7.OEM kulingana na ombi lako
vifaa vya bidhaa vinavyopatikana

Matibabu ya uso

Uwekaji mchoro, uwekaji mtakatifu asilia, matibabu ya joto, ung'aaji, upakaji wa nikeli, upako wa chrome, uwekaji wa zinki, upitishaji wa manjano, upitishaji wa dhahabu, satin, uso mweusi uliopakwa n.k.

Njia ya Usindikaji

CNC machining, ngumi, kugeuza, kusaga, kuchimba visima, kusaga, broaching, kulehemu na kuunganisha
kumaliza bidhaa

QC & Cheti

Mafundi hujiangalia katika uzalishaji, angalia-mwisho kabla ya kifurushi na mkaguzi wa Ubora wa kitaalam
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Kifurushi & Muda wa Kuongoza

Ukubwa: Michoro
Kipochi/Kontena na godoro la mbao, au kulingana na maelezo maalum.
Sampuli za siku 15-25. Siku 30-45 agizo rasmi
Bandari: Shanghai/Ningbo bandari
vifurushi vya bidhaa

swSwahili