Fenner FU тибиндеги курттарды редуктор-алмаштыруу FU200
Introduction
Our company provides Fenner brand replacement worm gearbox - the Worm Reducer-Replacement of Fenner FU Type Worm Gearbox FU200. Our product is of high quality and offered at a competitive price. It is important to note that our product is a replacement part and not an original equipment manufacturer (OEM) part. If you require an OEM part, please contact the original supplier for purchase.
Продукт өзгөчөлүктөрү
- The housing is made of fine FG-260 grade C.I.
- The gearbox is equipped with well-designed fins and a suitable fan to dissipate heat.
- The entire design is based on BS 721:1963, with a precision level of A.
- Редуктор стандарттык редукторлор менен алмаштырууга ылайыкталган.
- The worm shaft is made of high-quality surface-hardened steel, precisely generated and ground for better performance.
- The worm wheel is made of extremely high-quality phosphor bronze, with a large cross-section (coupled with hub rigidity).
- The worm shaft and worm wheel shaft are installed on high-quality tapered roller/angular contact bearings to withstand axial thrust and suspended loads.
- At full load and 90??C temperature limit, the minimum gear life of all gearboxes is 20,000 hours. The gearbox requires no maintenance, just check the oil level every two weeks.
- All worm gearbox transmission ratios are from 5:1 to 70:1.
Курттарды азайтуучу түзүлүш
Курттарды азайтуучу аппарат төмөнкү бөлүктөрдөн турат:
- Курт сабы
- Курт дөңгөлөк
- Подшипник
- Турак жай
- Fins and fan
The worm shaft and worm wheel are the most important parts of the Worm Reducer. The worm shaft is made of high-quality surface-hardened steel, precisely generated and ground for better performance. The worm wheel is made of extremely high-quality phosphor bronze, with a large cross-section (coupled with hub rigidity). The bearing is used to support the worm shaft and worm wheel. The housing is made of fine FG-260 grade C.I. The fins and fan dissipate heat and keep the gearbox cool.
Тиешелүү курт редукторун тандоо
The selection of a gear unit is completed by comparing the actual transmitted load with the catalog rated value. However, actual load conditions may vary or fluctuate depending on the type of application and, to handle the same, a usage factor must be considered to achieve the equivalent load or design power. Therefore, the equivalent load=actual load x usage factor. Mechanical rated value and service factor mechanical rated value are used to measure capacity in terms of life and/or strength, assuming continuous operation of 10 hours per day under uniform load conditions. If the equipment runs for more than 10 hours a day, the mechanical service factor should be chosen based on the type of prime mover, the hours of operation per day, the type of application connected to the equipment, and its load characteristics to ensure the appropriate gear life catalog rated value allows for 100% momentary overload during start-up, braking, or operation up to a maximum of 10 times per day. Therefore, the catalog rated value of the selected equipment should be at least equal to or greater than half of the maximum overload achieved during its operation period. The use of a gearbox's life is determined by comparing the actual transmitted load with the catalog rated value. The following steps should be taken:
- Керектүү катышты эсептеңиз.
- Calculate the design power based on the load type, working hours, and service factor.
- Чыгуу моментин эсептөө.
- Маалыматтын негизинде аппаратты тандаңыз.
Мүмкүн болгон көйгөйлөр жана чечимдер
| Көйгөй | Себеп | Чечим |
|---|---|---|
| Overheating of Gearbox | Low oil level, high ambient temperature | Check the oil level, reduce ambient temperature |
| Noise from Gearbox | Loose gears, worn gears, inadequate lubrication | Tighten gears, replace gears, add appropriate lubrication |
| Вибрация | Loose bolts, worn gears, misaligned couplings | Tighten bolts, replace gears, align couplings |
| Leakage from Gearbox | Damaged seals, inadequate lubrication | Replace seals, add appropriate lubrication |
| Gearbox not Working | Электр же механикалык бузулуу | Contact our company for repair or replacement |
| Difficulty in Starting | Low oil level, worn gears, insufficient power supply | Check oil level, replace gears, verify power supply |
| Shocks during Operation | Overload, misaligned couplings, worn gears | Reduce load, align couplings, replace gears |
| Abrupt Stop of Gearbox | Электр же механикалык бузулуу | Contact our company for repair or replacement |
Fenner Worm редукторунун алмаштыруу
Our company's Worm Reducer-Replacement of Fenner FU Type Worm Gearbox FU200 has several advantages over Fenner brand gearboxes:
- Атаандаштыкка жөндөмдүү баада жогорку сапаттагы алмаштыруучу тетиктер
- Improvement in performance and durability
- Fits seamlessly with existing equipment
- Оңой орнотуу жана тейлөө
- Widely used in many industries such as equipment, food, car washing, packaging, transmission, automation, and solar energy
It is important to note that our product is a replacement part and not an OEM part. If you require an OEM part, please contact the original supplier for purchase. Additionally, our company provides various electric motors for sale to complement our gearboxes.
Installation Tips for Gearbox
The gearbox should be firmly installed to minimize the impact of vibration or overload. It is necessary to check if it is aligned and to use dowel pins to properly position the gears, preferably in diagonal directions. Flexible couplings (gear couplings with rubber lining/tire couplings) are important for improving gearbox performance. The couplings should be aligned to avoid angular and eccentric misalignment.
Курт редукторлору үчүн моторлор
The motor and gearbox are essential components of power transmission equipment. The gearbox is used to change the speed and torque of the motor, while the motor provides power to the gearbox. Without a good motor, the gearbox will not perform optimally. Similarly, without a good gearbox, the motor will not be able to transmit power efficiently. At our company, we provide various electric motors for sale to complement our gearboxes. Our electric motors are of high quality and come in different sizes and models to meet your specific needs.
Биздин компания жөнүндө
We are a comprehensive transmission equipment manufacturer with over 15 years of experience in the design, production, manufacture, and sales of gearboxes. Our products serve customers in Europe, America, Africa, Asia, and other regions and have won the praise of the market. Our mission and vision over the years have been consistent, and we have introduced advanced production equipment and testing equipment at home and abroad. We employ industry professionals and technicians to carry out innovative research and development and manufacturing. We use standardized production management methods to strictly control every aspect of our reducer production. Over the years, we have provided customers with high-quality, high-energy-efficiency, high-stability production. Our gearboxes are widely used in various industries such as equipment, food, car washing, packaging, transmission, automation, and solar energy. We welcome customers to explore our products and contact us for purchase. We pride ourselves on providing the best service, highest product quality, and competitive prices to our customers.
С&Ж
Q1: Can the Worm Reducer-Replacement of Fenner FU Type Worm Gearbox FU200 be used with any type of motor?
A1: Yes, the Worm Reducer-Replacement of Fenner FU Type Worm Gearbox FU200 can be used with any type of motor.
Q2: How often should the oil level in the gearbox be checked?
A2: The oil level in the gearbox should be checked every two weeks.
Q3: Can the Worm Reducer-Replacement of Fenner FU Type Worm Gearbox FU200 be used as an OEM part?
A3: No, the Worm Reducer-Replacement of Fenner FU Type Worm Gearbox FU200 is a replacement part and not an OEM part. If you require an OEM part, please contact the original supplier for purchase.