TFR140 Series High Precision Planetary Gearbox Helical Gear Reducer Overview

TFR140 Series High Precision Planetary Gearbox Helical Gear Reducer, also known as servo motor planetary gearbox and low backlash planetary gearbox, is a type of high-precision gearbox that is widely used in various industrial applications where precise motion control is required. It is designed to provide high torque density, high torsional stiffness, and low backlash. The TFR140 Series High Precision Planetary Gearbox Helical Gear Reducer is a versatile and reliable solution that can be used in a wide range of applications, including automation, robotics, medical equipment, aerospace, and more.

Yüksək Həssaslıqlı Planetar Ötürücü Qutusu Əsas Konstruksiyası

A High Precision Planetary Gearbox consists of several key components that work together to provide precise and reliable motion control:

• Günəş Ötürücü: located at the center of the planetary gearbox and is usually connected to the input shaft or fixed to the housing as a stationary component.
• Planet Gears: orbit around the sun gear and are supported and maintained in their relative positions by the planet carrier. Each planet gear meshes with both the sun gear and the ring gear and they collectively bear and distribute the load when power is input.
• Planet daşıyıcısı: planet dişli çarxlarını dəstəkləyən və onların günəş dişli çarxına nisbətən fırlanmasına imkan verən çoxsaylı planet dişli çarxı val dəlikləri olan bir quruluş. Planet daşıyıcısı çıxış elementi kimi çıxış edə bilər və ya fırlanma anı ötürmək və ya qəbul etmək üçün başqa bir vala qoşula bilər.
• Üzük Ötürücü/Halqa: a large-diameter annular gear fixed inside the housing with teeth on both its inner and outer surfaces that mesh with the planet gears. In some applications, the ring gear can also act as an input or output element.
• Yataklar və Mil Sistemi: bearings in a High Precision Planetary Gearbox are used to support the input shaft, output shaft, and planet carrier to ensure stable rotation and smooth operation between components.
• Mənzil: a sturdy structure that encloses all internal components, providing stable support for the gears, protecting the internal components from external impurities, and may contain cooling or lubrication systems.
• Şaftlar və açarlar: the input and output shafts are connected to the sun gear or the planet carrier through a key to transmit power and ensure accurate torque transmission and axial positioning.
• Möhürlər: seals are used to prevent lubricating oil leakage and contamination from entering the gearbox, ensuring cleanliness and good lubrication status inside the gearbox.

Yüksək Həssaslıqlı Planetar Ötürücü Qutusu İş Prinsipi

Yüksək Həssaslıqlı Planet Sürət Qutusu aşağıdakı prinsiplərə əsaslanaraq işləyir:

• Torkun ötürülməsi və gücləndirilməsi: when power is transmitted from the input shaft to the sun gear, the sun gear starts to rotate, and since the planet gears mesh with both the sun gear and the ring gear, they begin to revolve and rotate. Due to the joint action of multiple sets of planet gears, the load of the entire system is evenly distributed, which can significantly increase the output torque and achieve torque amplification.
• Sürət və ötürmə nisbətinə nəzarət: by adjusting the tooth count ratio between the sun gear, planet gears, and ring gear, the speed relationship and transmission ratio between the input and output can be precisely controlled. For example, if the number of planet gears is large or there is a large difference in tooth count between the sun gear and ring gear, the transmission ratio will increase, the output speed will decrease, and the torque will correspondingly increase.
• Aşağı əks təsir xüsusiyyətləri: High Precision Planetary Gearboxes are specially designed to reduce or eliminate the backlash between gears, which is commonly known as "zero/low backlash." This is typically achieved through precision machining, preload technology, and component selection to ensure high motion accuracy and smoothness under any load.
• Dinamik cavab və sabitlik: due to the even distribution of load and multiple contact points, High Precision Planetary Gearboxes can provide excellent dynamic performance, including fast response, stable operation, and durability under heavy loads.

Yüksək Həssaslıqlı Planetar Sürət Qutusu Dizaynı və Seçimi Mülahizələri

The design and selection of High Precision Planetary Gearboxes involve several key factors, including:

Yüksək dəqiqlikli planet sürət qutusu tətbiqləri

The High Precision Planetary Gearbox has a wide range of applications across various industries, including:

• Industrial automation equipment, such as robot joint drives, precision machine tool feed mechanisms, and semiconductor manufacturing equipment.
• Medical equipment, such as CT scanners, MRI machines, and surgical robots that require precise motion control and torque amplification.
• Aerospace and aviation applications, such as landing gear actuation systems, flight control system actuator, and satellite attitude adjustment devices.
• Yüksək ötürmə dəqiqliyi tələb edən elmi eksperimental avadanlıq, dəqiq ölçmə alətləri və optik izləmə sistemləri kimi dəqiq alətlər.
• Yeni enerjili nəqliyyat vasitələri üçün elektrik sükan sistemləri, elektrik nəqliyyat vasitələri üçün idarəedici qurğular və yüksək performanslı yarış avtomobilləri üçün ötürücü sistemlər kimi avtomobil istehsalı.
• Robotics technology, including joint drives in industrial robots, service robots, and special operation robots.
• Logistics automation, such as lifters, conveyor drives, and AGVs (automated guided vehicles) in automated warehousing systems.

Şirkət Təqdimatı

We are a professional manufacturer of power transmission equipment located in Hangzhou, Zhejiang. Our company strictly operates according to the international quality management system standard ISO90012078 and our products have passed the mandatory CCC certification in China and the CE certification of the European Union. Our products are produced according to international standards and have reached an advanced level compared with similar products internationally.

Üstünlüklərimiz

• Advanced production technology and equipment to ensure the quality of our products.
• Rich experience in the design and production of power transmission equipment.
• Professional technical support team to provide timely and effective technical assistance to customers.
• Strict quality control system to ensure that every product delivered meets customer requirements.
• Flexible and efficient production and delivery processes to meet different customer needs.
• Excellent after-sales service to provide customers with comprehensive support and solutions.

Müəllif: Miya