TNF115 ተከታታይ ከፍተኛ ትክክለኛነትን ፕላኔት Gearbox Helical Gear ቅነሳ

አጠቃላይ እይታ

TNF115 Series High Precision Planetary Gearbox Helical Gear Reducer, also known as servo motor planetary gearbox and low backlash planetary gearbox, is a type of high-precision gearbox used in various industrial applications. It is designed to provide accurate and reliable power transmission between two shafts while minimizing backlash and maximizing efficiency.

መሰረታዊ ግንባታ

1. Sun Gear: located at the center of the planetary gearbox, typically fixed to the input shaft or the housing as a stationary component.
2. Planet Gears: revolving around the sun gear, supported and kept in relative position by the planet carrier. Each planet gear meshes with both the sun gear and the internal gear, sharing and distributing the load when power is inputted.
3. Planet Carrier: a structure with multiple planet gear shaft holes, which carries the planet gears and allows them to rotate relative to the sun gear. The planet carrier can be used as an output element or connected to another shaft to transmit or receive torque.
4. Ring Gear/Annulus: a large diameter circular gear fixed inside the gearbox housing, with teeth on both inner and outer surfaces meshing with the planet gears. In some applications, it can also function as an input or output end.
5. Bearings and Shaft System: bearings in the high-precision planetary gearbox support the input and output shafts as well as the planet carrier, ensuring stable rotation and smooth operation of all components.
6. Housing: a sturdy structure that encloses all internal components, provides stable support for the gears, protects from external impurities, and may have cooling or lubrication systems.
7. Shafts and Keys: the input and output shafts connect to the sun gear or planet carrier via keys to transmit power and ensure precise torque transfer and axial positioning.
8. Seals: used to prevent lubricant leakage and contamination and ensure cleanliness and good lubrication status inside the gearbox.

የሥራ መርህ

1. Torque Transmission and Amplification: when power is transmitted from the input shaft to the sun gear, the sun gear starts to rotate, and the planet gears mesh with both the sun gear and the internal gear, thus beginning to rotate and revolve. Due to the combined effect of multiple sets of planet gears, the load of the entire system is evenly distributed, thereby significantly increasing the output torque and achieving torque amplification.
2. Speed and Gear Ratio Control: by adjusting the tooth number ratio of the sun gear, planet gear, and internal gear, the speed relationship and gear ratio between input and output can be precisely controlled. For example, if the number of planet gears is large or the tooth number difference between the sun gear and internal gear is large, the gear ratio increases, the output speed decreases, and the torque correspondingly increases.
3. Low Backlash Characteristic: high-precision planetary gearboxes specifically focus on reducing or eliminating the clearance between gears, known as "zero/low backlash." This is typically achieved through precision machining, preloading technology, and component selection, ensuring extremely high motion accuracy and smoothness under any load.
4. Dynamic Response and Stability: due to the uniform load distribution and multiple contact points, the planetary gearbox can provide good dynamic performance, including fast response, stable operation, and durability under heavy loads.

የንድፍ እና ምርጫ ግምት

መተግበሪያዎች

TNF115 Series High Precision Planetary Gearbox Helical Gear Reducer is widely used in various industrial applications, including but not limited to:

• Servo motor systems: for precise speed control and position positioning in industrial automation equipment such as robot joint drives, precision machine tool feed mechanisms, and semiconductor manufacturing equipment.
• Medical devices: for precise motion control and torque amplification in high-end medical equipment such as CT scanners, MRI machines, and surgical robots.
• Aerospace: for high-reliability and precision requirements in aircraft landing gear systems, flight control system actuators, and satellite attitude adjustment devices.
• Precision instruments: for high-precision transmission requirements in scientific experimental equipment, precision measuring instruments, and optical tracking systems.
• Automotive manufacturing: for power steering systems in new energy vehicles, drive units in electric vehicles, and transmission systems in high-performance racing cars.
• Robotics: for joint drives in industrial robots, service robots, and special operation robots.
• Logistics automation: for lifters, conveyor drives, and AGVs in automated storage systems.

ስለ እኛ

We are a professional manufacturer of transmission equipment located in Hangzhou, Zhejiang. Our products strictly follow the international quality management system standard ISO9001:2003, and have passed the mandatory CCC certification in China and CE certification in the European Union. Our products are produced according to international IC standards and have reached the advanced level of similar products around the world.

የእኛ ጥቅሞች

1. Advanced production equipment and technology, ensuring high quality and consistency of our products.
2. Strict quality control system, covering all aspects of our production process from design to delivery.
3. Experienced and skilled technical team, providing customized solutions and technical support for our customers.
4. Wide range of product offerings, covering various types of gearboxes and motors for different applications and industries.
5. Competitive pricing and flexible delivery terms, meeting the diverse needs of our customers.
6. Professional and responsive customer service, ensuring timely and effective communication and problem solving.

ደራሲ: ሚያ