Durable Using Low Price Trailer parts Axle Straight Spindle

This trailer axle straight spindle is used for 1 1/16 "x 1 1/16" trailer wheel bearings, including axle nuts, washers, retaining rings, and split pins. Each has a capacity of up to 1250 pounds.

ዋና መለያ ጸባያት:
1250 pounds/capacity
Used for an axle load capacity of 1500 to 2500 pounds
Including spindle nut, washer, retaining ring, and cotter pin

What is a Straight Spindle？

A straight spindle is a type of trailer spindle that is straight. It does not have any bends or curves, and it is typically made of steel. Straight spindles are used on various trailers, including utility, cargo, and fifth wheels.

Straight spindles have several advantages over other types of spindles, including:

• They are relatively simple to manufacture, which makes them more affordable.
• They are solid and durable.
• They are easy to install and maintain.

However, straight spindles also have some disadvantages, including:

• They are not as aerodynamic as other types of spindles, which can reduce fuel efficiency.
• They are not as strong as tapered spindles, which can be problematic if the trailer carries a heavy load.

Overall, straight spindles are an excellent choice for trailers that do not need to be very aerodynamic or that are not carrying very heavy loads. They are affordable, durable, and easy to install and maintain.

Here are some additional details about straight spindles:

• The diameter of a straight spindle is typically 1 inch or 1.5 inches.
• The length of a straight spindle is typically 4 inches to 6 inches.
• Straight spindles are typically made of steel but can also be made of aluminum or other materials.
• Straight spindles are commonly used with hubs with four or five lugs.
• Straight spindles are usually lubricated with grease.

Application of Straight Spindle

Straight spindles are used on a variety of trailers, including:

• የመገልገያ የፊልም ማስታወቂያዎች
• የጭነት ተጎታች
• Fifth wheels
• የጀልባ ተጎታች
• የፈረስ ተጎታች
• የካምፐር ተጎታች ቤቶች
• ተጎታች ቤቶችን ይጥሉ
• Skid steer trailers

Straight spindles are also used on some types of farm equipment, such as tractors and harvesters.

Here are some of the reasons why straight spindles are used on these types of trailers and equipment:

• They are relatively simple to manufacture, which makes them more affordable.
• They are solid and durable.
• They are easy to install and maintain.
• They can be used with a variety of hubs.
• They are relatively lightweight, which can help to improve fuel efficiency.

However, straight spindles also have some disadvantages, as mentioned earlier:

• They are not as aerodynamic as other types of spindles, which can reduce fuel efficiency.
• They are not as strong as tapered spindles, which can be problematic if the trailer carries a heavy load.

Overall, straight spindles are an excellent choice for trailers and equipment that do not need to be very aerodynamic or that are not carrying very heavy loads. They are affordable, durable, and easy to install and maintain.

Here are some additional details about the application of straight spindles:

• The diameter of a straight spindle is typically 1 inch or 1.5 inches.
• The length of a straight spindle is typically 4 inches to 6 inches.
• Straight spindles are typically made of steel but can also be made of aluminum or other materials.
• Straight spindles are commonly used with hubs with four or five lugs.
• Straight spindles are usually lubricated with grease.

Productive process of Spindle Round Tube

The productive process of a spindle round tube can be divided into the following steps:

1. Raw material preparation: The raw materials for spindle round tubes are typically steel or aluminum billets. These billets are cut to the desired length and then heat-treated to improve their strength and durability.
2. Extrusion: The billets are then extruded through a die to form the desired shape of the tube. This process creates a hollow tube with a uniform wall thickness.
3. Annealing: The extruded tube is then annealed to relieve the stresses created during the extrusion process. This makes the tube more ductile and easier to machine.
4. ማሽነሪ፡ The annealed tube is then machined to the final dimensions. This may include cutting, drilling, and threading.
5. ማጠናቀቅ፡ The machined tube is then finished to the desired appearance. This may include painting, powder coating, or anodizing.

The productive process of a spindle round tube can be pretty complex, and the specific steps may vary depending on the type of material and the desired specifications of the tube. However, the general steps outlined above are typically followed.

Here are some of the factors that can affect the production process of spindle round tubes:

• The type of material: The type of material used will affect the temperature and pressure required for extrusion and the kind of tooling needed.
• The tube's dimensions: The tube's dimensions will affect the die used for extrusion, as well as the type of machining required.
• The finish: The desired finish will affect the type of finishing process that is used.

The productive process of a spindle round tube can be pretty efficient and produce a high-quality product. However, the cost of the process will vary depending on the type of material, the dimensions of the tube, and the desired finish.

በየጥ
1. የምርት ሂደቱ ምንድን ነው?

መ: ጥሬ እቃ መቁረጥን፣ ማሽንን ማቀናበርን፣ መፍጨትን፣ መለዋወጫዎችን ማፅዳትን፣ መሰብሰብን፣ ማፅዳትን፣ ማቃጠልን፣ የዘይት ሽፋንን፣ ሽፋንን መጫን፣ መሞከር እና ማሸግ ጨምሮ የማምረት ሂደት።

2. የምርቱን ጥራት እንዴት መቆጣጠር እንደሚቻል?

መ: የተራቀቁ መሳሪያዎችን እና ጥብቅ አስተዳደርን በማጣመር ለደንበኞቻችን ለአለም አቀፍ ደረጃ ከፍተኛ ደረጃ እና ጥራት ያለው የመግደል ድራይቭ እናቀርባለን።
3: የመላኪያ ጊዜዎ ምን ያህል ነው?
መ: ክምችት ካለ በሰባት ቀናት ውስጥ ነው; አክሲዮን ከሌለ እንደ ብዛቱ መጠን 25-45 ቀናት ነው.

4. እርስዎ የንግድ ድርጅት ወይም አምራች ነዎት?

መ: እኛ slewing ድራይቭ ውስጥ 20 ዓመት ልምድ ያለው የእኛ ፋብሪካ አለን; የእኛ አይነት ፋብሪካ + ንግድ ነው።

5፡ የክፍያ ውልዎ ምንድ ነው?

መ: የአክሲዮን እቃዎች፣100% ቅድመ ክፍያ። እቃዎች ማምረት ካስፈለጋቸው, 30% ቅድመ ክፍያ ነው, እና ቀሪው ከመላኩ በፊት ይከፈላል. ከ 50000 ዶላር በላይ ለሆኑ ትላልቅ ትዕዛዞች L/C በእይታ መቀበል እንችላለን።

6. የእርስዎ MOQ ምንድን ነው?

መ: ለመደበኛ ዓይነት, MOQ የለም. በኤሌክትሪክ ተጎታች ብሬክ መሰረት እቃዎችን ለማምረት, ያስፈልገናል.

7. መጓጓዣ ምንድን ነው?
መ: አነስተኛ መጠን፣ በመግለፅ፣ እንደ DHL፣ UPS፣ TNT፣ FEDEX ያሉ። ብዙ ከሆነ, በባህር ወይም በአየር.

8. የኦሪጂናል ዕቃ አምራች አገልግሎት መስጠት ይችላሉ?
መ: አዎ፣ የኦሪጂናል ዕቃ አምራች አገልግሎት እንሰጣለን ፣ እንደ መጠንዎ ፣ ማሸግ እና ሌሎች መስፈርቶች ያድርጉ።