2) Loosen the bolts only when fitting the shafts. DO NOT eliminate the bolts totally. If taken off they may possibly fall into the housing and result in a failure. The box must be disassembled to retrieve the bolts if this takes place.
one) Tighten bolts to avoid oil leaking for the duration of operation. (The bolts have a seal under their heads.)
Get treatment when tightening the 4 x locking bolts within the housing. These bolts repair the detachable splined shafts in area.
Observe: When fitting splined shafts.
Simply click on drawing to enlarge.
1:one.eighty five speed increaser with thirteen/four”Z20 splined output shaft.
Maintain browsing for more information about pto gearbox.