Air compressor for Laser cutting

Screw air compressor for Laser cutting – the revolution of laser cutting gas protection

The efficiency of the laser cutting machine will be doubled

  • Pressure reached 1.8MPa: laser cutting speed increased by 50%, cutting surface will be smooth without burrs
  • Stable and reliable: It adopts the energy-saving CMN’s air-end with large screw low-speed and double-acting opposed compression chamber, and adopts heavy-duty bearings, the equipment runs more reliably and more stably, the whole technical performance improved more than 20%.
  • The equipment works in smoothly and the low noise; the double-acting opposed compression chamber construction lead to very lower vibration, it will not invert a standing coin on the machine. With very Silent running, it support field installation and saving the pipeline costs much.
  • Oil content << 2PPM: ensuring the laser head is free from contamination and keep it as a long service life.
  • We can also supply higher pressure model at 2.5 MPa for laser cutting machines, let your laser cutting machine release the maximum capacity

Device parameters

Model Pressure flow rate outlet outlet Oil content Outlet temperature G.W. Overall dimensions
CMN11A 1.8MPa 0.7m³/min 1/2″ ≤2ppm +15℃ 390kgs 1100×680×1010

Remarks: please pay special attention the measured flow rate at 1.8MPa pressure when selecting model.

Request For Quotation