ภาพรวม

The TM180 Series High Precision Planetary Gearbox Helical Gear Reducer, also known as the servo motor planetary gearbox and low backlash planetary gearbox, is a type of gearbox used for precise speed control and positioning in industrial automation equipment. It is defined as a gearbox that uses small, high-efficiency planetary gears to transfer power between the input and output shafts, and is known for its high precision, low backlash, and compact design. The TM180 Series High Precision Planetary Gearbox Helical Gear Reducer is widely used in various fields such as robotics, medical equipment, aerospace, precision instruments, and automotive manufacturing.

โครงสร้างพื้นฐานของกระปุกเกียร์ดาวเคราะห์ความแม่นยำสูง

The High Precision Planetary Gearbox consists of the following components:

• ซันเกียร์: Located at the center of the planetary gearbox, the sun gear is usually connected with the input shaft or fixed on the housing as a stationary part.
• ดาวเคราะห์เกียร์: The planet gears rotate around the sun gear and are supported and kept in relative position by the planet carrier. Each planet gear meshes with the sun gear and the internal ring gear, and they jointly bear and distribute the load when power is input.
• ผู้ให้บริการดาวเคราะห์: The planet carrier is a structure with multiple planet gear shaft holes, which supports and allows the planet gears to rotate relative to the sun gear. The planet carrier can be used as an output element or connected with another shaft to transmit or receive torque.
• วงแหวนเกียร์/วงแหวน: The internal ring gear is a large-diameter ring gear fixed inside the casing, with teeth on both the internal and external surfaces that mesh with the planet gears. In some applications, the internal ring gear can also serve as an input or output end.
• แบริ่งและระบบเพลา: The bearings in the high precision planetary gearbox support the input and output shafts and the planet carrier, ensuring stable rotation and smooth operation between each component.
• ที่อยู่อาศัย: The housing is a sturdy structure that encapsulates all internal components, providing stable support for the gears and protecting them from external impurities. It may also include a cooling or lubrication system.
• เพลาและกุญแจ: The input and output shafts are connected to the sun gear or planet carrier to transmit power through keys, ensuring precise torque transmission and axial positioning.
• ซีล: Seals are used to prevent lubricating oil leakage and contaminants from entering the gearbox, ensuring the internal cleanliness and good lubrication status of the gearbox.

หลักการทำงานของกระปุกเกียร์ดาวเคราะห์ความแม่นยำสูง

The working principle of High Precision Planetary Gearbox is as follows:

• การส่งแรงบิดและการขยาย: When power is transmitted from the input shaft to the sun gear, the sun gear starts to rotate. As the planet gears mesh with the sun gear and the internal ring gear, they begin to rotate and revolve. Due to the joint action of multiple sets of planet gears, the load of the entire system is evenly distributed, which can significantly increase the output torque and achieve torque amplification.
• การควบคุมความเร็วและอัตราทดเกียร์: By adjusting the tooth number ratio of the sun gear, planet gears, and internal ring gear, the speed relationship and gear ratio between the input and output can be precisely controlled. For example, if the number of planet gears is greater or the difference between the tooth numbers of the sun gear and the internal ring gear is larger, the gear ratio increases, the output speed decreases, and the torque correspondingly increases.
• ลักษณะฟันเฟืองต่ำ: The High Precision Planetary Gearbox is specially designed to reduce or eliminate the backlash between gears, which is called "zero/low backlash". This is usually achieved through precision machining, preloading technology, and component selection, ensuring extremely high motion accuracy and smoothness under any load.
• การตอบสนองแบบไดนามิกและความเสถียร: Due to the even load distribution and multiple contact points, the planetary gearbox can provide excellent dynamic performance, including quick response, stable operation, and durability under heavy loads.

การพิจารณาการออกแบบและการเลือกกระปุกเกียร์ดาวเคราะห์ความแม่นยำสูง

The design and selection considerations of High Precision Planetary Gearbox are as follows:

การใช้งานของกระปุกเกียร์ดาวเคราะห์ความแม่นยำสูง

กล่องเกียร์ดาวเคราะห์ความแม่นยำสูงใช้กันอย่างแพร่หลายในสาขาต่อไปนี้:

• Industrial automation equipment: Used for precise speed control and positioning in robotics, precision machine tools, semiconductor manufacturing equipment, etc.
• Medical equipment: Used for precise motion control and torque amplification in CT scanners, MRI machines, surgical robots, etc.
• Aerospace: Used in aircraft landing gear systems, flight control systems, satellite attitude adjustment devices, etc. that require high reliability and precision.
• Precision instruments: Used in scientific experimental equipment, precision measuring instruments, optical tracking systems, etc. that require high transmission accuracy.
• Automotive manufacturing: Used in power steering systems of new energy vehicles, drive units of electric vehicles, and transmission systems of high-performance racing cars.
• วิทยาการหุ่นยนต์: ใช้ในส่วนประกอบการขับเคลื่อนร่วมของหุ่นยนต์อุตสาหกรรม หุ่นยนต์บริการ และหุ่นยนต์ปฏิบัติการพิเศษ
• Logistics automation: Used in lifting machines, conveyor belt drivers, AGVs, and other automatic storage systems.

เกี่ยวกับบริษัทของเรา

We are a professional manufacturer of power transmission equipment located in Hangzhou, Zhejiang. We operate strictly according to the international quality management system standard ISO9001:2020, and our products have passed China's mandatory CCC certification and European Union CE certification. Our products are produced according to international IC standards and have reached the advanced level of similar international products.

ข้อดีของเรา

1. We have a professional R&D team and advanced equipment, which can provide customized solutions for customers.
2. We have strict quality control procedures and testing methods to ensure the reliability and stability of our products.
3. We have a complete sales and after-sales service system to provide customers with professional technical support and timely response.
4. We have obtained many patents and awards for our products, demonstrating our strong technical strength and innovation ability.
5. We have a wide range of products and can provide customers with one-stop shopping.
6. We have a good reputation in the industry and have established long-term cooperative relationships with many well-known companies.

ผู้เขียน: มิยะ