0 Items

Shaft collar

The shaft collar is a simple, yet essential, machine component found in many power transmission applications, most particularly motors and gearboxes. The collars are used as mechanical halts, locating elements, and bearing faces. The basic design lends itself to easy installation. Many people will become familiar with shaft collars through using Meccano.

1.Set screw style

  The first mass-produced shaft collars were arranged screw collars and were used primarily on Shaft collar - shaft collar 250x250range shafting in early making mills. These early shaft collars had been solid band types, choosing square-head arranged screws that protruded from the collar. Protruding screws demonstrated to be a issue because they could catch on a worker’s clothing while rotating on a shaft, and pull them into the machinery.
  Base collars noticed few improvements until 1910 through 1911, when William G. Allen and Howard Testosterone levels. Hallowell, Sr, functioning independently, presented commercially viable hex socket head established screws, and Hallowell copyrighted a shaft collar with this safety-style established screw. His safety arranged collar was shortly replicated by others and became an sector standard. The invention of the safety set collar was the starting of the recessed-socket mess market.
  Arranged mess collars are best used when the material of the shaft is normally softer than the arranged screw. Regrettably, the arranged mess causes damage to the shaft – a flare-up of shaft materials – which makes the collar harder to change or remove. It is common to machine little apartments onto the shaft at the arranged mess places to get rid of this issue.

2.Clamping style

  Clamp-style shaft collars are designed to resolve the complications connected with the set-screw collar. They come in one- and two-piece designs. Rather of protruding into the shaft, the screws take action to shrink the collar and lock it into place. The simplicity of use is definitely preserved with this style and there can be no shaft damage. Since the screws shrink the collar, a even distribution of force can be imposed on the shaft, leading to a holding power that is nearly twice that of set-screw collars.
  Although clamp-type collars function very well under relatively constant tons, shock a good deal can cause the collar to change its position on the shaft. This is definitely due to the very high factors that can end up being made by a fairly little mass during effect, likened to a statically or steadily applied weight. As an option for applications with this kind of launching, an undercut can end up being produced on the shaft and a clamp collar can be used to create a positive prevent that is definitely more resistant to surprise a lot.
  Perhaps the most innovative and useful of the collars is certainly the two-piece clamping collar. Two-piece clamp-style shaft collars can end up being disassembled or installed in placement without having to remove various other elements from the shaft. The two-piece design provides better clamping pressure than a solitary piece clamp because all of the drive can be moved straight into clamping the shaft. In solitary piece designs, the non-tightened aspect provides detrimental power as it must hold the collar open to enable it to end up being placed onto the shaft. The single tightener must work against this pressure as well as offer clamping force of its personal.
  Two-screw clamps still provide pressure on two edges (one sizing) only. Four (or more) mess clamps provide push on four (or even more) sides, and therefore two dimensions.

3.Axial clamps

  A further refinement of shaft collars is where a single bolt and nut encompases the shaft. The bolt (outdoor twine) can be provides kerf slashes, making fingers, which are compressed onto the shaft as a nut is usually tightened over it. These are discovered on contemporary tripod legs and collets. If wrench-tightened, these can end up being very tight.

4.Drill collars

  In drilling, a drill collar includes a heavy pipe above the drill bit in a exercise string.

Contact us for More information → https://www.ever-power.net/contact-us/

You are always welcome to ask any information! Please feel free to contact us!

Request a quote

If you have any request, please fill this form and we will reply you within 24 hours.


1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request


Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.


CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly


Technicians self-check in production,final-check before package by professional Quality inspector

ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009


Size: Drawings

Wooden Case/Container and pallet, or as per customized specifications.

15-25days samples. 30-45days offcial order

Related Searches:

neque. vulputate, sem, luctus Aenean ipsum mi,

Pin It on Pinterest

Share This