0 Items

#41 Roller Chain Sprockets

Our 41 roller chain sprockets are manufactured dimensionally to ANSI B29 Standards and are manufactured from high-strength high-grade steel for optimal wear life and performance, while still being supplied at a budget-friendly cost. A high-quality sprocket is essential to the long-term operation of the chain drive. If sprockets are manufactured out of cheaper and lower-grades of steel the teeth will wear and hook resulting in excessive wear on the 41 roller chain.

#41 A-Plate Sprockets

 

 

 

 

 

 

 

 

Sprocket Size Tooth Count Type Outside Diameter Stock Bore Weight (LBS)
41A15 15 A 5/8 0.28
41A16 16 A 5/8 0.34
41A17 17 A 5/8 0.36
41A18 18 A 5/8 0.44
41A19 19 A 5/8 0.46
41A20 20 A 5/8 0.52
41A21 21 A 5/8 0.60
41A22 22 A 5/8 0.66
41A23 23 A 5/8 0.72
41A24 24 A 5/8 0.82
41A25 25 A 5/8 0.88
41A26 26 A 5/8 0.94
41A27 27 A 5/8 1.00
41A28 28 A 5/8 1.08
41A30 30 A 19/32 1.20
41A32 32 A 19/32 1.44
41A35 35 A 19/32 1.70
41A36 36 A 19/32 1.84
41A40 40 A 23/32 2.22
41A42 42 A 23/32 2.50
41A45 45 A 23/32 2.52
41A48 48 A 23/32 2.92
41A54 54 A 23/32 3.54
41A60 60 A 21/32 4.60
41A70 70 A 23/32 6.22
41A72 72 A 23/32 6.32
41A80 80 A 23/32 8.46
41A84 84 A 23/32 9.12
41A96 96 A 15/16 11.84
41A112 112 A 15/16 15.84

 

#41 B-Hub Sprockets

 

 

 

 

 

 

 

 

 

Sprocket Size Tooth Count Type Outside Diameter Stock Bore Recommend Max. Bore Hub Diameter Length Thru Bore Weight (LBS)
41B6 6 B 1.170 3/8 3/8 21/32 7/8 0.07
41B7 7 B 1.340 1/2 3/8 3/4 7/8 0.10
41B8 8 B 1.510 1/2 1/2 63/64 7/8 0.19
41B9 9 B 1.670 1/2 5/8 1-1/8 7/8 0.20
41B10 10 B 1.840 1/2 3/4 1-1/4 7/8 0.27
41B11 11 B 2.000 1/2 7/8 1-7/16 7/8 0.35
41B12 12 B 2.170 1/2 15/16 1-9/16 7/8 0.44
41B13 13 B 2.330 1/2 1 1-9/16 7/8 0.50
41B14 14 B 2.490 1/2 1-1/4 1-3/4 7/8 0.57
41B15 15 B 2.650 5/8 1-5/16 1-29/32 7/8 0.72
41B16 16 B 2.810 5/8 1-3/8 2-1/16 7/8 0.91
41B17 17 B 2.970 5/8 1-1/2 2-15/64 1 1.09
41B18 18 B 3.140 5/8 1-5/8 2-3/8 1 1.25
41B19 19 B 3.300 5/8 1-3/4 2-15/32 1 1.49
41B20 20 B 3.460 5/8 1-7/8 2-3/4 1 1.64
41B21 21 B 3.620 5/8 1-7/8 2-7/8 1 1.81
41B22 22 B 3.780 5/8 2 3 1 1.93
41B23 23 B 3.940 5/8 2-1/4 3-3/16 1 2.25
41B24 24 B 4.100 5/8 2-1/4 3-1/4 1 2.33
41B25 25 B 4.260 5/8 2-1/4 3-1/4 1 2.46
41B26 26 B 4.420 5/8 2-1/4 3-1/4 1 2.50
41B27 27 B 4.580 5/8 2-1/4 3-1/4 1 2.56
41B28 28 B 4.740 5/8 2-1/4 3-1/4 1 2.64
41B30 30 B 5.060 5/8 2-1/4 3-1/4 1 2.80
41B32 32 B 5.380 5/8 2-1/4 3-1/4 1 2.96
41B35 35 B 5.860 5/8 2-3/8 3-1/4 1 3.12
41B36 36 B 6.020 3/4 2-3/8 3-1/4 1 3.32
41B40 40 B 6.650 3/4 2-3/8 3-1/4 1-1/16 4.06
41B42 42 B 6.970 3/4 2-3/8 3-1/2 1-1/16 4.10
41B45 45 B 7.450 3/4 2-3/8 3-1/2 1-1/16 4.18
41B48 48 B 7.930 3/4 2-3/8 3-1/2 1-1/16 4.92
41B54 54 B 8.880 3/4 2-3/8 3-1/2 1-1/16 5.68
41B60 60 B 9.840 3/4 2-3/8 3-1/2 1-1/16 6.78
41B70 70 B 11.430 3/4 2-3/4 4 1-3/16 9.54
41B72 72 B 11.750 3/4 2-3/4 4 1-3/16 9.64
41B80 80 B 13.030 3/4 2-3/4 4 1-3/16 11.54
41B84 84 B 13.660 1 2-3/4 4 1-3/16 12.20
41B96 96 B 15.570 1 2-3/4 4 1-3/16 14.86
41B112 112 B 18.120 2-3/4 4 1-3/16 19.16

#41 Taper Bushed Sprockets

 

 

 

 

 

 

 

 

Sprocket Size Tooth Count Bushing Outside Diameter Pitch Diameter  Max. Bore Dimension (L) Dimension (C) Type Weight (LBS)
41BTB14 14 1008 2.490 2.247 1 7/8 1-7/8 B 0.4
41BTB15 15 1008 2.650 2.503 1 7/8 1-7/8 B 0.5
41BTB16 16 1008 2.810 2.721 1 7/8 2 B 0.6
41BTB17 17 1210 2.970 2.879 1-1/4 1 2-3/8 B 0.7
41BTB18 18 1210 3.140 3.038 1-1/4 1 2-3/8 B 0.9
41BTB19 19 1210 3.300 3.196 1-1/4 1 2-1/2 B 1.1
41BTB20 20 1610 3.460 3.355 1-5/8 1 2-7/8 B 1.1
41BTB21 21 1610 3.620 3.513 1-5/8 1 3 B 1.2
41BTB22 22 1610 3.780 3.672 1-5/8 1 3 B 1.3
41BTB23 23 1610 3.940 3.831 1-5/8 1 3 B 1.4
41BTB24 24 1610 4.100 3.989 1-5/8 1 3 B 1.4
41BTB25 25 1610 4.260 4.148 1-5/8 1 3 B 1.5
41BTB26 26 1610 4.420 4.466 1-5/8 1 3 B 1.5
41BTB28 28 1610 4.740 4.783 1-5/8 1 3 B 1.7
41BTB30 30 1610 5.060 5.101 1-5/8 1 3 B 1.8
41BTB32 32 1610 5.380 5.578 1-5/8 1 3 B 1.9
41BTB35 35 1610 5.860 5.737 1-5/8 1 3 B 2.3
41BTB36 36 1610 6.020 6.373 1-5/8 1 3 B 2.4
41BTB40 40 1610 6.650 7.168 1-5/8 1 3 B 2.7
41BTB45 45 1610 7.450 7.645 1-5/8 1 3 B 3.5
41BTB48 48 1610 7.930 8.599 1-5/8 1 3 B 4.1
41BTB54 54 1610 8.880 9.554 1-5/8 1 3 B 4.9
41BTB60 60 1610 9.840 11.145 1-5/8 1 3 B 5.7
41BTB70 70 1610 11.430 11.463 1-5/8 1 3 B 7.4
41BTB72 72 1610 11.750 12.736 1-5/8 1 3 B 8.2
41BTB80 80 1610 13.030 15.282 1-5/8 1 3 B 9.6
41BTB96 96 1610 15.570 1610 1-5/8 1 3 B 13.1

 

#41 QD Sprockets

 

Sprocket Size Tooth Count Bushing Outside Diameter Pitch Diameter Type Max. Bore Dimension (L1) Dimension (L2) Dimension (C) Dimension (Y) Dimension (J) Dimension (T) Weight (LBS)
41JA16 15 JA 2.650 2.405 B 1-1/4 1-1/8 1-1/8 2-1/16 49/64 25/64 .227 0.32
41JA16 16 JA 2.810 2.563 B 1-1/4 1-1/8 1-1/8 2-1/16 49/64 25/64 .227 0.40
41JA17 17 JA 2.980 2.721 B 1-1/4 1-1/8 1-1/8 2-1/16 49/64 25/64 .227 0.50
41JA18 18 JA 3.140 2.879 B 1-1/4 1-1/8 1-1/8 2-1/16 49/64 25/64 .227 0.60
41JA19 19 JA 3.300 3.038 B 1-1/4 1-1/8 1-1/8 2-1/16 49/64 25/64 .227 0.68
41SH20 20 SH 3.460 3.196 B 1-5/8 1-7/16 1-7/16 2-11/16 1-1/32 37/64 .227 0.78
41SH21 21 SH 3.620 3.355 B 1-5/8 1-7/16 1-7/16 2-11/16 1-1/32 37/64 .227 0.82
41SH22 22 SH 3.780 3.513 B 1-5/8 1-7/16 1-7/16 2-11/16 1-1/32 37/64 .227 1.06
41SH23 23 SH 3.940 3.672 B 1-5/8 1-7/16 1-7/16 2-11/16 1-1/32 37/64 .227 1.14
41SH24 24 SH 4.100 3.831 B 1-5/8 1-7/16 1-7/16 2-11/16 1-1/32 37/64 .227 1.16
41SH25 25 SH 4.260 3.989 B 1-5/8 1-7/16 1-7/16 2-11/16 1-1/32 37/64 .227 1.22
41SH26 26 SH 4.420 4.148 B 1-5/8 1-7/16 1-7/16 2-11/16 1-1/32 37/64 .227 1.26
41SH27 27 SH 4.580 4.307 B 1-5/8 1-7/16 1-7/16 2-11/16 1-1/32 37/64 .227 1.40
41SH28 28 SH 4.740 4.466 B 1-5/8 1-7/16 1-7/16 2-11/16 1-1/32 37/64 .227 1.54
41SH30 30 SH 5.060 4.783 B 1-5/8 1-7/16 1-7/16 2-11/16 1-1/32 37/64 .227 1.58
41SH32 32 SH 5.380 5.101 B 1-5/8 1-7/16 1-7/16 2-11/16 1-1/32 37/64 .227 1.68
41SH35 35 SH 5.860 5.578 B 1-5/8 1-7/16 1-7/16 2-11/16 1-1/32 37/64 .227 1.79
41SDS36 36 SDS 6.020 5.737 B 2 1-1/2 1-1/2 3-3/16 1-3/32 17/32 3/4 1.92
41SDS40 40 SDS 6.650 6.373 B 2 1-1/2 1-1/2 3-3/16 1-3/32 17/32 3/4 2.32
41SDS42 42 SDS 6.970 6.691 B 2 1-1/2 1-1/2 3-3/16 1-3/32 17/32 3/4 2.44
41SDS45 45 SDS 7.450 7.168 B 2 1-1/2 1-1/2 3-3/16 1-3/32 17/32 3/4 2.76
41SDS48 48 SDS 7.930 7.645 B 2 1-1/2 1-1/2 3-3/16 1-3/32 17/32 3/4 3.36
41SDS54 54 SDS 8.890 8.599 B 2 1-1/2 1-1/2 3-3/16 1-3/32 17/32 3/4 3.98
41SDS60 60 SDS 9.840 9.554 B 2 1-1/2 1-1/2 3-3/16 1-3/32 17/32 3/4 5.54
41SK70 70 SK 11.430 11.145 B 2-5/8 2-1/8 2-1/8 3-7/8 1-41/64 1-1/32 1-1/4 7.42
41SK72 72 SK 11.750 11.463 B 2-5/8 2-1/8 2-1/8 3-7/8 1-41/64 1-1/32 1-1/4 8.02
41SK80 80 SK 13.030 12.736 B 2-5/8 2-1/8 2-1/8 3-7/8 1-41/64 1-1/32 1-1/4 9.64
41SK84 84 SK 13.660 13.372 B 2-5/8 2-1/8 2-1/8 3-7/8 1-41/64 1-1/32 1-1/4 10.40
41SK96 96 SK 15.570 15.281 B 2-5/8 2-1/8 2-1/8 3-7/8 1-41/64 1-1/32 1-1/4 12.82
41SK112 112 SK 18.120 17.828 B 2-5/8 2-1/8 2-1/8 3-7/8 1-41/64 1-1/32 1-1/4 17.28

 

#41 A-Plate Sprockets

#41 B-Hub Sprockets

#41 Taper-Bushed Sprockets

#41 JA Type Sprockets

#41 SH Type Sprockets

#41 SDS Type Sprockets

#41 SK Type Sprockets

Product Quick Detail:

  • Standard and non-standard available
  • With high quality and competitive price
  • Prompt delivery
  • Packing as per customer’s demand.

We promise will offer the best price by the high quality in china! We also accept special order about the products. If you are interested in our products. Please do not hesitate to let us know.We are pleased to give you the detailed information.We promise that our products would be safety and were in high quality and reasonable price. If you are interested in our products, please contact us asap.We are sincerely looking for your cooperation.

Most of our products are exported to Europe or Americas, both standard and nonstandard products available. We can produce as per your drawing or sample. Material can be standard or as per your special request. If you choose us, you choose reliable.

pruduct quality report

Materials Available

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request
product materials available

Surface Treatment

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

Processing Method

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly
product finishing

QC & Certificate

Technicians self-check in production,final-check before package by professional Quality inspector
ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

Package & Lead Time

Size: Drawings
Wooden Case/Container and pallet, or as per customized specifications.
15-25days samples. 30-45days offcial order
Port: Shanghai/Ningbo port
product packages