Poultry&Pig Geared Motors For Feeding Systems Opening And Closing Of Windows In The Farm Tecno

They have already been specifically designed for feeding systems in poultry farms.
All housings are in die-cast aluminium alloy and for suitable heavy working conditions.
The gears are helical and so are manufactured from case-hardened and tempered alloy steel.
The output shafts are in hardened-tempered alloy steel.
The bearings are calculated for an average life for 20.000 working hours.
A low cost solution with a high degree of customization.
Feed is transported in two primary ways, either by screw or chain feeder systems. Both wormgearboxes and helical gearboxes can be Poultry&Pig Geared Motors For Feeding Systems Opening And Closing Of Windows In The Farm Tecno utilized in these applications , transporting feed Poultry&Pig Geared Motors For Feeding Systems Opening And Closing Of Windows In The Farm Tecno in little and large quantities when necessary
It is a single stage.
Technical Details
Torque: 19…24 Nm
Power: 0,25…1,1 kW
Ratio: 2,55…7,87
For hygiene and maintenance purposes the feeding troughs must be lifted. Gearmotors from our Poultry&Pig gearbox can provide a solution because of this movement.
Another application would be the opening and closing of windows in the farm which are usually difficult to attain. Here a mixture wormgearbox can be used also with a pre stage unit to be able to open the windows immediately.

Pin It on Pinterest

Share This