Worm Reducer-Penggantian Fenner FU Type Worm Gearbox FU800

Thank you for your interest in our Worm Reducer-Replacement of Fenner FU Type Worm Gearbox FU800. In this product introduction, we will provide a comprehensive overview of the key features and applications of our product. It is important to note that our company specializes in offering replacement parts for Fenner brand worm gearboxes, which are of high quality and available at competitive prices. Please be aware that our products are replacement parts and not original equipment. If you require original equipment, please contact the original supplier for purchasing.

Penerangan Produk

Our Worm Reducer-Replacement of Fenner FU Type Worm Gearbox FU800 has the following key features:

1. The housing is made from high-quality FG-260 C.I., ensuring durability and reliability.
2. The gearbox is equipped with well-designed fins and an appropriate fan for efficient heat dissipation.
3. The entire design is based on BS 721:1963 with precision grade A.
4. Kotak gear direka bentuk untuk ditukar ganti dengan kotak gear standard.
5. The worm shaft is made from high-quality hardened steel, precisely generated and ground for optimal performance.
6. The worm wheel is made from high-quality phosphor bronze, with a large cross-section for enhanced rigidity.
7. Kedua-dua aci cacing dan roda cacing dipasang pada galas sentuhan penggelek/sudut tirus berkualiti tinggi untuk menahan beban tujahan paksi dan jejarian.
8. With a maximum operating temperature of 90 degrees Celsius and full load, the minimum gear life for all gearboxes is 20,000 hours.
9. The gearboxes require no maintenance and only need to be checked for oil levels every two weeks.
10. All worm gearboxes have a gear ratio ranging from 5:1 to 70:1.

Struktur Pengurangan Cacing

Worm Reducer terdiri daripada komponen berikut:

1. Worm Shaft: Transmits rotational motion from the input to the worm wheel.
2. Worm Wheel: Engages with the worm shaft and converts rotational motion into linear motion.
3. Housing: Encloses and protects the internal components of the worm reducer.
4. Bearing: Supports the worm shaft and worm wheel, allowing smooth and efficient operation.
5. Seals: Ensure proper lubrication and prevent leakage of oil or contaminants.

Memilih Kotak Gear Worm yang Tepat

Selecting the appropriate worm gearbox is done by comparing the actual transmission load with the catalog rated values. However, the actual load conditions may vary or fluctuate depending on the application type. To handle the same problem, it is necessary to consider the use factor to achieve an equivalent load or design power. Therefore, the equivalent load is calculated by multiplying the actual load by the service factor of the mechanical rated value and the service factor of the mechanical rated value. The capacity is measured in terms of life and/or strength, assuming continuous operation for 10 hours per day under uniform load conditions. If the equipment operates more than 10 hours per day, it is necessary to select the mechanical service factor based on the type of prime mover, the number of hours of operation per day, and the load characteristics of the application connected to the equipment to ensure the appropriate gear life. The catalog rated value of the selected equipment should be at least equal to or greater than half of the maximum overload achieved during its operation. By comparing the actual transmission load with the catalog rated value, the service life of the gearbox can be determined.

1. Langkah 1: Kira nisbah yang diperlukan.
2. Step 2: Calculate the design power based on the load type, operating time, and service factor.
3. Langkah 3: Kira tork output.
4. Step 4: Select the device based on the data.

Kemungkinan Isu dan Penyelesaian

The following table outlines potential problems that may arise when using this type of worm gear reducer, along with their causes and corresponding solutions:

Penggantian Kotak Gear Fenner Worm

We offer several advantages in replacing Fenner brand worm gearboxes:

1. High-Quality Replacement: Our worm gearboxes are designed and manufactured to meet or exceed the quality standards of Fenner brand gearboxes.
2. Competitive Pricing: We offer competitive prices for our replacement worm gearboxes, providing excellent value for our customers.
3. Replacement Parts: Please note that our products are replacement parts and not original equipment. If you require original equipment, please contact the original supplier for purchasing.

Kami juga mengalu-alukan pesanan tersuai berdasarkan keperluan khusus anda.

When choosing a worm gearbox, it is important to consider various factors such as load type, operating time, and service coefficient. By properly selecting the gearbox, you can ensure its longevity and optimal performance. Our knowledgeable team can assist you in selecting the most suitable gearbox for your specific application.

Pertimbangan Pemasangan

Proper installation of the worm gearbox is crucial to minimize the impact of vibrations or heavy loads. It is essential to ensure alignment and use dowel pins to properly position the gears, preferably in a diagonal direction. The use of flexible couplings (gear couplings with rubber sleeves or tire couplings) is vital to enhancing the performance of the worm gearbox. The