bar1.png

Tractor gearbox for PTO drive shaft, agricultural machines 540 rpm, 3:1 ratio, China manufacturer OEM / ODM

 

Tractor gearbox for PTO drive shaft, agricultural machines 540 rpm, 3:1 ratio,

 

Agricultural PTOs are standardized in dimensions and speed. The ISO standard for PTOs is ISO 500, which as of the 2004 edition was split into three parts:

  1. ISO 500-1 General specifications, safety requirements, dimensions for master shield and clearance zone
  2. ISO 500-2 Narrow-track tractors, dimensions for master shield and clearance zone
  3. ISO 500-3 Main PTO dimensions and spline dimensions, location of PTO.

The original type calls for operation at 540 revolutions per minute (RPM). A shaft that rotates at 540 rpm has 6 splines on it, and a diameter of 1⅜”. Two newer types, supporting higher power applications, operate at 1000 RPM and differ in shaft size. The larger shaft has 20 splines (1¾” diameter), while the smaller has 21 (1⅜” diameter). All three types rotate counterclockwise when viewed from the tractor (When standing behind the tractor, the shaft turns clockwise). A 10 spline type was used with some early equipment such as the 1948 Land Rover, a six spline adapter was usually supplied. It is customary for agricultural machines manufacturers to provide the nominal PTO power specification, an indication of the available instantaneous power at the shaft.

 The PTO rotational speed was specified as 536 ± 10 rpm; the direction was clockwise. The speed was later changed to 540 rpm.

Truck transmissions have one or more locations which allow for a PTO to be mounted. The PTO must be purchased separately and care is required to match the physical interface of the transmission with a compatible PTO. PTO suppliers will usually require details of the make, model and even serial number of the transmission. Care is also needed to ensure that the physical space around the transmission allows for installation of the PTO. The PTO is engaged/disengaged using the main transmission clutch and a remote control mechanism which operates on the PTO itself. Typically an air valve is used to engage the PTO, but a mechanical linkage, electric or hydraulic mechanism are also options.

Most Unimogs come with front and/or rear PTO’s and hydraulics as well as three point hitch systems.

Units will be rated according to the continuous and intermittent torque that can be applied through them and different models will offer different “PTO shaft rotation to engine RPM” ratios.

In the majority of cases, the PTO will connect directly to a hydraulic pump. This allows for transmission of mechanical force through the hydraulic fluid system to any location around the vehicle where a hydraulic motor will convert it back into rotary or linear mechanical force. Typical applications include:

  • Running a water pump on a fire engine or water truck
  • Running a truck mounted hot water extraction machine for carpet cleaning (driving vacuum blower and high-pressure solution pumps)
  • Powering a blower system used to move dry materials such as cement
  • Raising a dump truck bed
  • Operating the mechanical arm on a bucket truck used by electrical maintenance personnel or Cable TV maintenance crews
  • Operating a winch on a tow truck
  • Operating the compactor on a garbage truck
  • Operating a Boom/Grapple truck
  • Operating a truck mounted tree spade and lift-mast assembly

 

Features available

Our product can be adapted. Please give us the required model name so we can provide you the most accurate quotation.

This chart if for reference, if you need different features, provide us all relevant details for your project and we will be glad to help you finding the product matching your need at the best quality with the lowest price.

Please note the price and the MOQ may vary regarding the product you chose: do not hesitate to contact us to know more!

 

Our service

We Can Provide You:

◆ On-time Delivery of a wide variety of products
◆ Exceptional product solutions and service
◆ Quality guarantee
◆ Local technical support
◆ Fast response to customers: Feedbacks in 24 hours

“Quality is priority” EVER-POWER people always attach great importance to quality controlling from the very beginning to the end. Our factory has gained CE, VB, SGS & ISO certificates.

Ever-Power Transmission Group is a group corporation manufacturering all kinds of transmission components. We have 3 factories and 2 abroad sales corporations.

 

About us

Our company manufactures sophisticated boring and milling power head, numerical control (hard rail and wire rail) sliding table and numerical control machine. We provide modular combination design and manufacturing scheme to effectively improve production capacity in accordance with product characteristics required for any industry.

The products provided by Jingyao Numerical Control Company are manufactured at the vertical and horizontal machining center and are scanned using three-dimensional detectors. The hardness text shall be made for main parts after thermal treatment. The products have very high machining precision, easy transmission, specious surface and reasonable design. The manufactured product is widely used in the auto parts, engine parts, agricultural machinery, engineering machinery, textile machinery, water heating fittings, pipe fittings, chemical equipment parts, military project and mould manufacturing industry.

Since products are on the market, they have been highly recommended by both domestic and foreign customers.

The company mainly sells control parts, driving parts, cutting tools (measuring implement) and other precision parts of domestic and overseas brands. On the basis of the resource superiority of taking full advantage of the “Chinese cutting Tool and Measuring implement Market ” “Chinese Mechanical and Electrical Hardware city”, “Taizhou Automation Equipment Market”, and by combination with the internal technology experience, the company will provide on-line and off-line (O2O) one-stop purchasing platform and establish distribution departments in major cities.

Company tenet: creation of value for customer, creation of opportunities for employees, and creation of benefits for the enterprise. We firmly believe that we are able to open up a new situation where we can get win-win results and mutual benefits with new and old customers through unremitting efforts.

 

FAQ

Q: Are you trading company or manufacturer ?

A:  Our group consists in 3 factories and 2 abroad sales corporations.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: How long is your delivery time ? What is your terms of payment ?

A: Generally it is 40-45 days. The time may vary depending on the product and the level of customization. For standard products, the payment is: 30% T/T in advance ,balance before shippment.

Q: What is the exact MOQ or price for your product ?

A: As an OEM company, we can provide and adapt our products to a wide range of needs.Thus, MOQ and price may greatly vary with size, material and further specifications; For instance, costly products or standard products will usually have a lower MOQ. Please contact us with all relevant details to get the most accurate quotation.

If you have another question, please feel free to contact us