Бетті таңдаңыз

Спиральды конустық беріліс

Spiral Bevel Gear product 1Spiral Bevel Gear product 2

Spiral Bevel Gears Sizing

Spiral Bevel Gears Are Available In Pitches Of Between 1 . 5 MOD And 5 MOD And Are Available In A Ratio Of 2: 1 As Standard. Non-Standard Dimensions Can Be Custom Manufactured On Request.

We Make Spiral Bevel Gears Only For Industrial Applications.

If You Have A High-Speed Application That Requires A Lot Of Torque, Then Spiral Bevel Gears Are A Great Option. The Gears Run At 90° To Each Other And Have “Spiral” Shaped Teeth Which Provides Maximum Tooth Surface Contact While Rotating. With Contact Spread Over The Whole Tooth, The Spiral Bevel Gear Can Be Run Much Faster Than The Straight Tooth Bevel Gear And Handle Harder Starts And Stops.

Spiral Bevel Gears Are Typically Made From Hardened Steel. The Teeth Of These Gears Are Usually Ground For A More Precise Finish Allowing For Little Noise At High Speeds. You Can Specify Left Hand Or Right Hand Depending On The Direction You Should Run The Gears

Spiral Bevel Gear product 3Spiral Bevel Gear product 4

The force acting on the spiral bevel gear

The advantages of spiral bevel gears over straight ones are becoming more apparent in various applications. Spiral bevel gears ensure even tooth load distribution, resulting in increased load capacity without surface fatigue. Additionally, their helix angle ensures they can carry more loads without causing premature surface wear. To learn more about the benefits of spiral bevel gears, keep reading! This article will cover what acts on spiral bevel gears and the methods used to manufacture them.

The force acting on the spiral bevel gear

The force acting on the spiral bevel gear is equal to the tangential force multiplied by the number of cycle repetitions. The pressure angle n is 20 degrees and the helix angle m is 35 degrees. This results in a tangential force of 100 N being applied to the central portion of the flank. In addition to tangential forces, gears experience radial and axial forces. The force acting on the spiral bevel gear can be decomposed into two subcomponents: F1 and F2, respectively.

The force acting on the spiral bevel gear is based on three basic elements: the pinion and the gear. The three components are in a torsional relationship. Therefore, the two gear bodies have the radial force and axial force. Here's how they affect the meshing of the gears. The axial force on the drive gear is equal to the radial force on the driven gear.

Bevel gears are used in many applications, including automotive, locomotive, marine applications, and power plants. They can also be used on aircraft as auxiliary equipment. They can be part of a differential drive. In addition to automotive use, bevel gears are used in many other industries, including the construction industry, heavy equipment, and aerospace. If you're wondering if your car has bevel gear, consider applying.

Спиральды конустық берілісSpiral Bevel Gear product 5

A manufacturing method of spiral bevel gear

There are various methods of manufacturing spiral bevel gears, each of which is unique and has its value. During manufacturing, gear blanks are measured and verified. The geometry of the gear blank must match the one being constructed, including tangential, radial, and axial components. The radius, average pitch, and root diameter must be the same for right-hand and left-hand spiral bevel gears. The pitch, face, and root angles of the internal and external gears must match.

Spiral bevel gears are manufactured using a five-axis milling center, allowing manufacturers to create all types of profiles. This technology allows these machines to produce high-quality bevel gears in the hardened state. The first paper in this series explores CNC milling machines to manufacture spiral bevel gears. It also provides an overview of traditional methods of gear manufacturing.

The tooth profile of the workpiece is formed by a casting process or a closed hot die forging process. The cold precision forging process is an alternative. Cold precision forging ensures dimensional accuracy and surface quality. The teeth of the gear may not need to be machined, but the tooth profile may need to be milled for accurate measurement. If the gear has threaded holes, these may need to be machined.

Spiral Bevel Gear product 5Spiral Bevel Gear product 6

Application of Spiral Bevel Gear

Spiral bevel gears are straight bevel gears. Spiral bevel gears are quieter and generate less vibration than traditional linear models. However, some industries do find that the lower speed and torque of spiral bevel gears make them unsuitable for their applications. To be precise, the most crucial application of spiral bevel gears is different drive angles - 90 degrees.

The meshing characteristics of spiral bevel gears depend on many factors. The error can be equivalent to two spatial dislocations: axial displacement deviation and axial offset error. The latter can be converted to an arc of a cone with an intermediate width equal to the shaft angular deviation. These factors can be combined to produce an accurate measurement of installation error. Spiral bevel gears are designed for long life and are made of durable aluminum alloy housing. They can be manufactured from a variety of different materials.

Spiral bevel gears can be further classified according to the manufacturing process. Some are made using the Gleason method, which features zero inclination of the arc and midpoint. Spiral bevel gears are more efficient than other types of right-angle gears. The quality of spiral bevel gears meets or exceeds the American Gear Manufacturers Association (AGMA). High-quality spiral bevel gears can achieve 99% efficiency.

Bevel Gear product 7Bevel Gear product 8

What Is Spiral Bevel Gear?

Spiral Bevel Gears are the most complicated type of bevel gear. In contrary to the teeth configuration of straight bevel gears, the teeth of spiral gears are curved and oblique. This causes increased tooth overlap, which facilitates progressive activation and dissociation upon tooth contact. Because of the enhanced smoothness, there is less vibration and noise created during operation. Spiral bevel gears also have larger load capabilities due to increased load sharing from more teeth in contact. As a result, they can be smaller in size than straight bevel gears of the same capacity.

Features of Spiral Bevel Gears:

  • Sound Reduction in Right Angle Gear Drives
  • Drives with Spiral Bevels for High-Torque and High-Speed Solutions
  • Gear drives stay cool with smooth functioning.
  • Repairs and replacements are reduced using spiral bevel gears.

Bevel Gear 9Bevel Gear 10

Applications of Spiral Bevel Gears:

Here are some industrial applications of spiral bevel gears -

  • Аэроғарыш
  • Mills for Cement
  • Sand Mixers & Cone Crushers
  • Tower of Cooling
  • Food Processing & Marine Packaging

Өнімнің жылдам мәліметтері:

  • Стандартты және стандартты емес қол жетімді
  • Жоғары сапамен және бәсекеге қабілетті бағамен
  • Жедел жеткізу
  • Тұтынушының сұранысы бойынша орау.

Біз Қытайда жоғары сапа бойынша ең жақсы бағаны ұсынамыз деп уәде береміз! Сондай-ақ өнімдерге арнайы тапсырыс қабылдаймыз. Егер сіз біздің өнімдерге қызығушылық танытсаңыз. Бізге хабарлаудан тартынбаңыз. Біз сізге егжей-тегжейлі ақпарат беруге қуаныштымыз. Біздің өнімдеріміз қауіпсіз және жоғары сапалы және қолайлы бағада болатынына уәде береміз. Егер сіз біздің өнімдерге қызығушылық танытсаңыз, бізбен мүмкіндігінше тезірек хабарласыңыз. Біз сіздің ынтымақтастығыңызды шын жүректен іздейміз.

Біздің өнімдеріміздің көпшілігі Еуропаға немесе Америкаға экспортталады, стандартты және стандартты емес өнімдер бар. Біз сіздің сызбаңызға немесе үлгіңізге сәйкес жасай аламыз. Материал стандартты немесе сіздің арнайы сұранысыңыз бойынша болуы мүмкін. Бізді таңдасаңыз, сенімді таңдайсыз.

өнім сапасы туралы есеп

Қол жетімді материалдар

1. Тот баспайтын болат: SS201, SS303, SS304, SS316, SS416, SS420
2. Болат:C45(K1045), C46(K1046),C20
3. Жез:C36000 (C26800), C37700 (HPb59), C38500(HPb58), C27200(CuZn37), C28000(CuZn40)
4. Қола: C51000, C52100, C54400, т.б.
5. Темір: 1213, 12L14,1215
6. Алюминий: Al6061, Al6063
7. Сіздің сұранысыңыз бойынша OEM
өнім материалдары қолжетімді

Беттік өңдеу

Күтімдеу, табиғи канонизация, термиялық өңдеу, жылтырату, никельмен қаптау, хромдау, мырышпен қаптау, сары пассивизация, алтын пассивизация, атлас, қара бетін боялған және т.б.

Өңдеу әдісі

CNC өңдеу, штамптау, жону, фрезерлеу, бұрғылау, тегістеу, броштау, дәнекерлеу және құрастыру
өнімді әрлеу

QC және сертификат

Техниктер өндірісте өзін-өзі тексереді, кәсіби сапа инспекторы пакетке дейін соңғы тексеруді жүргізеді
ISO9001:2008, ISO14001:2001,ISO/TS 16949:2009

Пакет және жеткізу уақыты

Өлшемі: Суреттер
Ағаш қорап/контейнер және паллет немесе теңшелген сипаттамаларға сәйкес.
15-25 күндік үлгілер. Ресми тапсырыс 30-45 күн
Порт: Шанхай/Нинбо порты
өнім пакеттері