“H” CLASS TRANSFER ROOFTOP CHAINS (H78A/H78B/H130/H131/H138)

Disclaimer

All the contents of this page are from the network, and the content is only as a reference for product selection. Our products are replacement parts rather than original spare parts. We are not the holder of the original trademark of the content. Our products are only suitable for after-sales replacement parts rather than original spare parts. If you need to buy original spare parts, please contact the original factory to buy.

“H” Class Transfer Rooftop Chains

EVER-POWER offers two types of transfer – “H” Class Transfer Chain and Combination Transfer Chain. This product description will cover the “H” Class Transfer Chain, which includes chains numbered H78A, H78B, H130, H131, and H138. All “H” Class Transfer Chain is available only in riveted building.

Types of “H” Class Transfer Chain

“H” Class Transfer Chain numbered H78A, H130, and H131 is manufactured with peaked roofs. Chain numbered H138 and H78B has flat roofs. Both types of EVER-POWER Transfer Chain, described sometimes as “roof top” and “camelback” chain, are designed to carry heavily concentrated loads such as lumber, boxes, barrels, and crates. They are usually intended for operation in troughs in several parallel strands with only the tops of the links protruding.

Specifications

All “H” Class Transfer Chain is available in Promal (Duramal). The tensile strengths of HZPT Transfer Chain range between 11,700 to 30,000 pounds. Rivet pins furnished with “H” Class Transfer Chain are T-head pins which engage two head holders, cast on the side bars of each link, to avoid pin rotation and minimize wear and elongation of pitch. “EVER-POWER” Transfer Chain is available in a pitch selection of 1.631 to 4.000 inches. Every “EVER-POWER” Transfer Chain is produced according to manufacturer's requirements and could be interchanged with chain of other manufacturers, where available.

Common Usage Scenarios

“H” Class Transfer Rooftop Chains are commonly used in industries such as lumber, packaging, and manufacturing. They are designed to carry heavily concentrated loads and are suitable for operation in troughs in several parallel strands with only the tops of the links protruding. These chains are ideal for use in situations where space is limited and heavy loads need to be transported.

Benefits

  • Designed to carry heavily concentrated loads
  • Suitable for operation in troughs in several parallel strands with only the tops of the links protruding
  • Ideal for use in situations where space is limited and heavy loads need to be transported

Materials and Installation

“H” Class Transfer Rooftop Chains are available in Promal (Duramal) and are installed using T-head pins which engage two head holders, cast on the side bars of each link, to avoid pin rotation and minimize wear and elongation of pitch. These chains are designed for use in troughs in several parallel strands with only the tops of the links protruding.

Maintenance and Repair

Regular maintenance is necessary to keep “H” Class Transfer Rooftop Chains running smoothly. Chains should be inspected regularly for wear and elongation of pitch. If any damage or wear is detected, chains should be repaired or replaced immediately to prevent further damage.

Replacement

If “H” Class Transfer Rooftop Chains need to be replaced, it is important to select a replacement chain that is compatible with the existing chain. EVER-POWER Transfer Chains are produced according to manufacturer's requirements and could be interchanged with chain of other manufacturers, where available.

EVER-POWER's Product Business

EVER-POWER GROUP is committed to providing high quality products at a favorable price, along with considerate service. We welcome customers to visit us and can customize chains based on pictures or samples provided.

FAQ

1. What is the tensile strength of “H” Class Transfer Rooftop Chains?

The tensile strengths of HZPT Transfer Chain range between 11,700 to 30,000 pounds.

2. What are “H” Class Transfer Rooftop Chains used for?

“H” Class Transfer Rooftop Chains are commonly used in industries such as lumber, packaging, and manufacturing. They are designed to carry heavily concentrated loads and are suitable for operation in troughs in several parallel strands with only the tops of the links protruding.

3. How are “H” Class Transfer Rooftop Chains installed?

“H” Class Transfer Rooftop Chains are installed using T-head pins which engage two head holders, cast on the side bars of each link, to avoid pin rotation and minimize wear and elongation of pitch. These chains are designed for use in troughs in several parallel strands with only the tops of the links protruding.

4. How often should “H” Class Transfer Rooftop Chains be inspected?

Regular maintenance is necessary to keep “H” Class Transfer Rooftop Chains running smoothly. Chains should be inspected regularly for wear and elongation of pitch.

5. Can EVER-POWER Transfer Chains be interchanged with chain of other manufacturers?

Yes, EVER-POWER Transfer Chains are produced according to manufacturer's requirements and could be interchanged with chain of other manufacturers, where available.

Contact us for More information → https://www.ever-power.net/contact-us/

You are always welcome to ask any information! Please feel free to contact us!

MATERIALS AVAILABLE

1. Stainless Steel: SS201, SS303, SS304, SS316, SS416, SS420
2. Steel:C45(K1045), C46(K1046),C20
3. Brass:C36000 ( C26800), C37700 ( HPb59), C38500( HPb58), C27200(CuZn37), C28000(CuZn40)
4. Bronze: C51000, C52100, C54400, etc
5. Iron: 1213, 12L14,1215
6. Aluminum: Al6061, Al6063
7.OEM according to your request

SURFACE TREATMENT

Annealing, natural canonization, heat treatment, polishing, nickel plating, chrome plating, zinc plating,yellow passivization, gold passivization, satin, Black surface painted etc.

PROCESSING METHOD

CNC machining, punch,turning, milling, drilling, grinding, broaching, welding and assembly

QC & CERTIFICATE

Technicians self-check in production,final-check before package by professional Quality inspector

ISO9001:2008 , ISO14001:2001,ISO/TS 16949:2009

PACKAGE & LEAD TIME

Size: Drawings

Wooden Case/Container and pallet, or as per customized specifications.

15-25days samples. 30-45days offcial order

Related Searches: