Κιβώτιο ταχυτήτων με σκουλήκι - Αντικατάσταση μειωτήρα σκουληκιών Chenta UMS (Universal Mounting)

Our company offers a brand replacement for Chenta UMS Worm Gear Reducer (Universal Mounting), known as the Worm Gearbox, Worm Gearmotor, Worm Speed Reducer, and Worm Drive. Our products are of high quality and offer competitive pricing. It is important to note that we only provide replacement parts for the original manufacturer's parts. If you wish to purchase original manufacturer's parts, please contact the original supplier.

Δομή του κιβωτίου ταχυτήτων Worm

• Άξονας σκουληκιού: The worm shaft is the main component of the gearbox. It carries the worm and transmits the power to the gear.
• Εργαλείο σκουληκιών: The worm gear is the driven gear in the gearbox. It meshes with the worm to transmit power.
• Στέγαση: The housing protects the internal parts of the gearbox and provides a mounting surface.
• Ρουλεμάν: The bearings support the worm shaft and reduce friction between the shaft and housing.
• Σφραγίδες: The seals prevent dust and other contaminants from entering the gearbox and keep the lubricant inside.

Χαρακτηριστικά του κιβωτίου ταχυτήτων Worm

• Applicable to both IEC and NEMA motors.
• Ratio range from 1/5 to 1/3600.
• Horsepower range from 1/4HP to 100HP.
• High-quality double-lip oil seals.
• Medium carbon steel worm shaft, hardened through heat treatment and thread grinding.
• Chromium-molybdenum steel worm shaft, hardened through high-frequency heat treatment and thread grinding, applicable to gearbox sizes of 300 and above.
• Aluminum bronze sand wheel, durable and long-lasting.
• Robust housing made of grey cast iron and ductile iron, applicable to gearbox sizes of 300 and above.
• Detachable base for universal mounting of gearbox.

Application of the Worm Gearbox

• Μεταφορικές ταινίες
• Αναδευτήρες και αναμικτήρες
• Εξοπλισμός επεξεργασίας τροφίμων
• Εξοπλισμός χειρισμού υλικών
• Automated machinery

Αντικατάσταση μειωτήρα σκουληκιών Chenta

• Our products are of high quality and offer competitive pricing.
• We offer replacement parts for Chenta UMS Worm Gear Reducer (Universal Mounting).
• Please note that we only provide replacement parts for the original manufacturer's parts. If you wish to purchase original manufacturer's parts, please contact the original supplier.

Additionally, we welcome customers to provide their own drawings or samples to customize our products.

Installation of the Worm Gearbox

1. Connect the input shaft directly to the motor, using a flexible coupling.
2. Συνδέστε τον άξονα εξόδου στο μηχάνημα, κατά προτίμηση χρησιμοποιώντας έναν σύνδεσμο γραναζιών.
3. Mount the gearbox on a stable foundation, considering good ventilation and easy oil filling/draining.
4. Align the input shaft of the gearbox with the motor shaft and ensure the tolerances are within specifications.
5. Before starting, manually check the input shaft and ensure that the nut runs smoothly.
6. Before starting, perform a no-load test run and immediately correct any anomalies.

Worm Gearbox Lubrication and Maintenance

• Replace the gearbox with a new one at the beginning of 300 hours of operation, then every 2500 hours thereafter. Also, check the oil regularly and change it as necessary.
• Use the same specification of oil for replacement and avoid mixing with oil from other brands.
• Before changing the oil, flush the gearbox interior and drain the oil, then refill with new oil.
• If the temperature exceeds 80?? during operation or any abnormal noise is detected, immediately turn off the gearbox for inspection and start operation again only after the issue has been resolved.
• Regular maintenance is required. In case of any wear and tear, corrective measures should be taken. The accuracy of the replacement parts should be consistent with the original standards, and a no-load test should be performed in advance.

Κινητήρες για μειωτήρες ατέρμονων γραναζιών

The Worm Gearbox and electric motors complement each other, making it important to choose the right motor for the right gearbox application. Our company also offers various electric motors for sale.

At Ever-power, we are a comprehensive transmission equipment manufacturer integrating research and development, manufacturing, and sales of speed reducers. With over 15 years of experience in the design, production, manufacture, and sales of gearboxes, we have served customers in Europe, America, Africa, Asia, and other regions, earning market praise.

We are committed to providing customers with high-quality, high-energy-efficiency, high-stability production. Our gearboxes are widely used in the equipment industry, food industry, car washing industry, packaging industry, transmission industry, automation industry, solar energy industry, and more. We provide the best service, highest product quality, and most competitive prices, and are always ready to work with new and existing customers.

Q&A

Q: Can the Worm Gearbox be used in any industrial application?

A: No, the Worm Gearbox is best suited for conveyor belts, agitators and mixers, food processing equipment, material handling equipment, and automated machinery.

Q: Can the Worm Gearbox be used with any type of motor?

A: The Worm Gearbox is applicable to both IEC and NEMA motors.

Q: How often should the Worm Gearbox oil be changed?

A: The Worm Gearbox should have its oil changed with a new gearbox after 300 hours of operation and every 2500 hours thereafter.