ট্র্যাক্টরের জন্য হাইড্রোলিক পিটিও ড্রাইভ গিয়ারবক্স স্পিড ইনক্রিজার
গতি বৃদ্ধিকারী পিটিও গিয়ারবক্স

Aluminum or cast iron housing
Connection for the hydraulic pump to tractor
540 or 1000 RPM input speed
Male or quick disconnect input shaft
Double input of splitter boxes
Series available:60001,60002,60003,60004,70001,70002,70003,70004,70005,70006,70007,70007-4/24
The Gearboxes are designed for connecting gear pumps to farm tractor power take-offs (PTO). The output speed of power take-offs is 540rpm which can be compared with the proper running speeds of hydraulic pumps. Different input running speeds can also be suitable, provided that the gearbox output speed does not exceed 3000 rpm.

| হাউজিং | Made in shell-cast aluminum or in high mechanical resistance cast iron. |
| গিয়ারস | Made in Steel UNI 18 PCR M03.Stub teeth guarantee very high resistance and run very quietly. |
| Shafts | Made in steel UNI 16 CRN4.They are coupled with gears via splined parts and are thus more suitable to stand the torques stated in the catalog. |
| Torques | The torque figures mentioned in the technical charts of all the PTO Gearboxes refer to continuous duty cycles. Torques under intermittent working conditions can be exceeded by 20%. |
| তৈলাক্তকরণ | gear oil must be put in the PTO gearbox prior to use-please note we do not supply the gear oil and will not accept responsibility for customers not putting oil in. Change the oil after the first 60-80 hours and then every 12 months or 1500 hours whichever falls first. |
| রক্ষণাবেক্ষণ | Please check the oil level via the special oil window every 50 hours. Working temperatures should not exceed 120 degrees Celcius under a continuous duty cycle. |
| Pump assembly | Pump assembly requires a half-coupling and a fitting flange according to specific requirements when ordering please specify flange and pump shaft type. Contact our technical staff when installing special pumps. |

P.T.O TRACTOR GEARBOXES
The gearbox series are used mainly for connecting hydraulic pumps to the power take-offs of agricultural tractors. PTO output, standardized at either 540 or 1,000 rpm, is, in this way, increased to optimum operating speeds for the hydraulic pumps. RD series of gearboxes are used to reduce hydraulic motor speed.
ML and B series gearboxes provide the connection for hydraulic pumps to low-speed tractor power take-off. The standard power take-off speed of 540 rpm, is increased by the gearbox ratio to optimal speed conditions required for the pump. Different inputs are accepted under the condition that the output speeds don’t go over 3000 rpm.


Application of Hydraulic PTO Speed Increaser
This new P.T.O (Power Take Off) consists of a 3:1 step-up gearbox and a hydraulic gear pump. It is ideal for adding hydraulic power to tractors and landscape equipment that are not already equipped with hydraulic circuits.
Used to power hydraulic augers, front-end loaders, lawnmowers, rotary sweepers, post hole drills, and post drives. These gearboxes are mainly used to connect the power take-off shaft at the rear of the tractor to drive the hydraulic pump to generate fluid power.
Other Related Agricultural Gearboxes
If you are interested, you can click the picture to learn about many agricultural machinery gearboxes
We also have other agricultural machinery accessories, you can buy them all in one-stop

Our Production Workshop of Gearboxes
Ever-power group focuses on the R&D, production, and sales of hydraulic and transmission parts. Since 2013, it has been producing speed increaser PTO gearboxes, which are mainly exported to European markets, such as France, Germany, Turkey, the United Kingdom..., and more than 15 countries.
With our resources in the field of hydraulics and agricultural machinery, we also distribute gear pumps, tractor machinery, dump truck pumps... From selected quality suppliers in China, orders in combination with gearboxes will enjoy special discounts after discussion .

পণ্যের দ্রুত বিস্তারিত:
- স্ট্যান্ডার্ড এবং অ-মানক উপলব্ধ
- উচ্চ মানের এবং প্রতিযোগী মূল্য সঙ্গে
- প্রম্পট ডেলিভারি
- গ্রাহকের চাহিদা অনুযায়ী প্যাকিং।
আমরা চীনে উচ্চ মানের দ্বারা সেরা মূল্য অফার করবে প্রতিশ্রুতি! আমরা পণ্য সম্পর্কে বিশেষ আদেশ গ্রহণ. যদি তুমি আমাদের পণ্যে আগ্রহি হও। দয়া করে আমাদের জানাতে দ্বিধা করবেন না। আমরা আপনাকে বিস্তারিত তথ্য দিতে পেরে আনন্দিত। আমরা প্রতিশ্রুতি দিচ্ছি যে আমাদের পণ্যগুলি নিরাপত্তা এবং উচ্চ মানের এবং যুক্তিসঙ্গত মূল্যে ছিল। আপনি যদি আমাদের পণ্য আগ্রহী হন, আমাদের সাথে যোগাযোগ করুন asap.We আন্তরিকভাবে আপনার সহযোগিতার জন্য খুঁজছেন হয়.
আমাদের বেশিরভাগ পণ্য ইউরোপ বা আমেরিকাতে রপ্তানি করা হয়, উভয় মানক এবং অমানক পণ্য উপলব্ধ। আমরা আপনার অঙ্কন বা নমুনা অনুযায়ী উত্পাদন করতে পারেন. উপাদান মান বা আপনার বিশেষ অনুরোধ অনুযায়ী হতে পারে. আপনি যদি আমাদের চয়ন করেন, আপনি নির্ভরযোগ্য চয়ন করুন.

উপকরণ উপলব্ধ
1. স্টেইনলেস স্টীল: SS201, SS303, SS304, SS316, SS416, SS420
2. ইস্পাত: C45(K1045), C46(K1046), C20
3. পিতল
4. ব্রোঞ্জ: C51000, C52100, C54400, ইত্যাদি
5. আয়রন: 1213, 12L14,1215
6. অ্যালুমিনিয়াম: Al6061, Al6063
7. আপনার অনুরোধ অনুযায়ী OEM
সারফেস ট্রিটমেন্ট
অ্যানিলিং, ন্যাচারাল ক্যানোনাইজেশন, হিট ট্রিটমেন্ট, পলিশিং, নিকেল প্লেটিং, ক্রোম প্লেটিং, জিঙ্ক প্লেটিং, হলুদ প্যাসিভাইজেশন, গোল্ড প্যাসিভাইজেশন, সাটিন, ব্ল্যাক সারফেস পেইন্ট করা ইত্যাদি।
প্রক্রিয়াকরণ পদ্ধতি
সিএনসি মেশিনিং, পাঞ্চ, টার্নিং, মিলিং, ড্রিলিং, গ্রাইন্ডিং, ব্রোচিং, ওয়েল্ডিং এবং সমাবেশ
QC এবং সার্টিফিকেট
প্রযুক্তিবিদরা উৎপাদনে স্ব-চেক করুন, পেশাদার গুণমান পরিদর্শক দ্বারা প্যাকেজের আগে চূড়ান্ত-চেক করুন
ISO9001:2008, ISO14001:2001,ISO/TS 16949:2009
প্যাকেজ এবং সীসা সময়
আকার: অঙ্কন
কাঠের কেস/কন্টেইনার এবং প্যালেট, বা কাস্টমাইজড স্পেসিফিকেশন অনুযায়ী।
15-25 দিনের নমুনা। 30-45 দিনের অফিসিয়াল অর্ডার
বন্দর: সাংহাই/নিংবো বন্দর







