مخفض دودة - استبدال مخفض مثبت على عمود علبة التروس الدودية الحلزونية من سلسلة Fenner C - مع ذراع عزم الدوران تخفيض مزدوج/ثلاثي 872

مقدمة المنتج

The Worm Reducer - Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer - with Torque Arm Double/Triple Reduction 872 is a high-powered gear unit designed for efficient and energy-saving right-angle drive applications. It offers multiple installation options and can accept standard IEC motors without the need for modifications. With modern design technology and high-quality components, the C series helical worm gear reducer surpasses any other gearbox in terms of cost efficiency per Nm. The C series right-angle gearboxes provide a highly compact solution that meets most requirements. Our company offers a replacement for the Fenner brand helical worm gearbox, which is of superior quality and available at a competitive price. It is important to note that our products are replacement parts, not original equipment. For the purchase of original equipment, please contact the original manufacturer.

مواصفات المنتج

• Transmission ratio ranging from 8:1 to 16,000:1, with a maximum torque of 10,000Nm.
• Available in 8 specifications with bore sizes ranging from 20mm to 90mm.
• Highly efficient and energy-saving right-angle drive unit with cost-effective gear transmission.
• Interchangeable in size with products from other manufacturers.
• Innovative motor adapter utilizing standard IEC interface.
• Oil-sealed reducer prevents oil leakage during motor disassembly.
• Multiple installation options including base, flange, or shaft mounting.

هيكل المنتجات

The Worm Reducer - Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer - with Torque Arm Double/Triple Reduction 872 consists of the following components:

1. Worm gear unit
2. عمود الدودة
3. عجلة دودة
4. السكن
5. عمود الإخراج

التطبيقات

The Worm Reducer - Replacement of Fenner Series C Helical Worm Gearbox Shaft Mounted Reducer - with Torque Arm Double/Triple Reduction 872 is suitable for various applications, including:

• أنظمة الناقل
• الخلاطات والمحرضين
• معدات التعبئة والتغليف
• أنظمة مناولة المواد
• آلات تجهيز الأغذية
• الأتمتة الصناعية
• Mining and mineral processing
• توليد الطاقة

تثبيت

The performance of the worm reducer depends on proper installation, lubrication, and maintenance. Please follow the guidelines below for different mounting methods:

تركيب العمود

Ensure that the shaft and gear unit bore for the mounting of the gear unit are clean and free of burrs. Apply a sufficient amount of lubricating oil on the shaft and bore to facilitate assembly and prevent friction corrosion. Slide the device onto the driven shaft and secure it with a key.

تركيب القدم

Mount the equipment securely on a sturdy structure. Install the output extended shaft if required. The connection between the shafts should use an elastic coupling, and ensure that the shaft deviation is within the allowable range of the coupling. When installing pulleys or sprockets on both shafts, place them as close to the gearbox as possible. Do not strike the shafts when installing or removing drive components to avoid damaging the bearings.

التشحيم والصيانة

Proper lubrication and maintenance are crucial for the performance of the worm reducer. Follow the guidelines below:

Oil Change

The size 870 and 871 gearboxes are lubricated for life, except for cases where they operate in explosive environments. All other sizes of gearboxes require oil change based on the operating temperature of the equipment. Half of the oil should be replaced after 1000 hours of operation, one year, or the specified service life for new gearboxes.

المشاكل المحتملة والحلول

Fenner Helical Worm Gearbox Replacement

Our company specializes in providing replacements for Fenner brand helical worm gearboxes. The advantages of our replacement products are as follows:

• Superior quality
• سعر تنافسى
• Direct replacement parts, not original equipment
• Customization available upon request