سلسلة TNE070 عالية الدقة لعلبة التروس الكوكبية مخفض التروس الحلزوني

TNE070 Series High Precision Planetary Gearbox Helical Gear Reducer is a type of gearbox that is commonly used in industrial automation applications. It is also known as servo motor planetary gearbox and low backlash planetary gearbox. The gearbox is designed to provide high precision and low backlash in various applications, making it a reliable solution for motion control systems.

البناء الأساسي لعلبة التروس الكوكبية عالية الدقة

The high precision planetary gearbox consists of several key components, including:

• صن جير: located at the center of the planetary gearbox, the sun gear is typically connected to the input shaft or fixed to the housing as a stationary component.
• كوكب التروس: planet gears rotate around the sun gear and are supported and held in relative position by the planet carrier. Each planet gear meshes with both the sun gear and the ring gear, and they collectively bear and distribute the load when power is input.
• حاملة الكوكب: the planet carrier is a structure with multiple planet gear shaft holes. It supports the planet gears and allows them to rotate relative to the sun gear. The planet carrier can act as an output component or be connected to another shaft to transmit or receive torque.
• الترس الدائري/الحلقة: the ring gear is a large diameter circular gear fixed inside the housing. It has teeth on both the inner and outer surfaces and meshes with the planet gears. In some applications, the ring gear can also act as an input or output end.
• المحامل ونظام العمود: the bearings in the high precision planetary gearbox support the input shaft, output shaft, and planet carrier to ensure stable rotation and smooth operation between components.
• السكن: the housing is a sturdy structure that encloses all internal components. It provides stable support for the gears, protects the internal components from external impurities, and may include cooling or lubrication systems.
• مهاوي ومفاتيح: the input and output shafts are connected to the sun gear or planet carrier through keys to transmit power and ensure precise torque transmission and axial positioning.
• الأختام: seals prevent lubricant leakage and pollution from entering the gearbox, ensuring cleanliness and good lubrication inside the gearbox.

مبدأ العمل لعلبة التروس الكوكبية عالية الدقة

The high precision planetary gearbox works by transferring and amplifying torque, controlling speed and gear ratio, and providing low backlash characteristics, dynamic response, and stability. The following are the main principles of its operation:

1. نقل عزم الدوران والتضخيم: when power is transmitted from the input shaft to the sun gear, the sun gear begins to rotate. The planet gears mesh with both the sun gear and the ring gear and start to revolve and rotate. Due to the combined action of multiple sets of planet gears, the load of the entire system is evenly distributed, which significantly increases the torque at the output end and achieves torque amplification.
2. التحكم في السرعة ونسبة التروس: by adjusting the number of teeth on the sun gear, planet gears, and ring gear, the speed relationship and gear ratio between the input and output can be precisely controlled. For example, if there are more planet gears or a large difference in the number of teeth between the sun gear and ring gear, the gear ratio increases, the output speed decreases, and the torque correspondingly increases.
3. خصائص رد فعل عنيف منخفضة: the high precision planetary gearbox pays special attention to reducing or eliminating the clearance between gears, which is also called "zero/low backlash". This is usually achieved through precision machining, preloading technology, and component selection to ensure high motion accuracy and smoothness under any load.
4. الاستجابة الديناميكية والاستقرار: due to the even load distribution and multiple contact points, the high precision planetary gearbox provides good dynamic performance, including fast response, stable operation, and durability under heavy loads.

اعتبارات التصميم والاختيار لعلبة التروس الكوكبية عالية الدقة

When designing and selecting a high precision planetary gearbox, the following factors should be considered:

تطبيقات علبة التروس الكوكبية عالية الدقة

The high precision planetary gearbox is widely used in various industries and applications, including:

• Industrial automation systems: used in conjunction with servo motors for precise speed control and position positioning in industrial automation equipment, such as robot joint drives, precision machine tool feed mechanisms, and semiconductor manufacturing equipment.
• Medical equipment: used in high-end medical equipment such as CT scanners, MRI machines, surgical robots, etc. for precise motion control and torque amplification.
• Aerospace: used in aircraft landing gear retracting systems, flight control system actuators, satellite attitude adjustment devices, etc. that require high reliability and precision.
• Precision instruments: used in scientific experimental equipment, precision measuring instruments, optical tracking systems, etc. that have extremely high requirements for transmission accuracy.
• Automotive manufacturing: used in power steering systems of new energy vehicles, drive units of electric vehicles, and transmission systems of high-performance racing cars.
• Robotics: including joint drive parts in industrial robots, service robots, and special operation robots.
• Logistics automation: used in automatic storage systems such as elevators, conveyor belt drives, AGVs (automatic guided vehicles), etc.

بالنسبه لشركتنا

We are a professional manufacturer of power transmission equipment, specializing in research, production, and sales. Our company is located in Hangzhou, Zhejiang and operates strictly in accordance with international quality management system standards ISO9001:2004. Our products have passed China's mandatory CCC certification and European Union CE certification. Our products are produced according to international IC standards and have reached the advanced level of similar products internationally.

إيجابياتنا

• Advanced production technology and equipment, ensuring high quality and reliability of products
• Strict quality control system, ensuring that each product meets international standards
• Professional technical team, providing customized solutions according to customer requirements
• Efficient logistics and distribution system, ensuring timely delivery of products
• Competitive price, providing customers with cost-effective products
• Excellent after-sales service, providing customers with technical support and maintenance services

الكاتب : ميا