የትል መቀነሻ - የፌነር FU አይነት የትል ማርሽ FU287 መተካት
መግቢያ
Worm Reducer-Replacement of Fenner FU Type Worm Gearbox FU287 is a high-quality gearbox that is designed to perform various industrial applications. Our company provides the replacement of Fenner brand worm gearbox, which is of good quality, and available at a discounted price. We only provide replacement parts for original factory parts, not the original factory parts. If you need to purchase original factory parts, please contact the original supplier for purchase.
ዋና መለያ ጸባያት
- Shell made of fine FG-260 grade C.I
- Designed with well-engineered cooling fins and suitable fan for efficient heat dissipation
- Precision grade A based on BS 721:1963
- Designed to be interchangeable with standard gearboxes
- Worm shaft made of high-quality surface-hardened steel, precisely generated and ground for better performance
- Worm wheel made of extremely high-quality phosphor bronze, sandwich casting/spinning, with a large cross-sectional area (combined with hub rigidity)
- Worm shaft and worm wheel shaft mounted on high-quality taper roller/angular contact bearings to withstand axial thrust and hanging loads
- Under the temperature limit of 90??C, the lowest gear life of all gearboxes under full load is 20,000 hours. No maintenance is required for the gearbox, just check the oil level every two weeks
- All worm gearboxes have a transmission ratio of 5:1 to 70:1
መዋቅር
Worm reducer is composed of the following parts:
- የትል ዘንግ
- ትል ጎማ
- Worm gear housing
- መሸከም
- Oil seal ring
- የግቤት ዘንግ
- የውጤት ዘንግ
- Oil cup
Each part plays an important role in the working process of worm reducer. Worm shaft transmits power to worm wheel, and the housing provides support to the worm shaft and worm wheel. The bearing helps the worm shaft and worm wheel to rotate smoothly while oil seal ring prevents oil leakage. Input and output shafts connect the worm reducer to the motor and transmission device. Oil cup is used to add lubricating oil.
Selection of Appropriate Worm Gearbox
The selection of a gearbox is completed by comparing the actual transmission load with the catalog rated value. However, actual load conditions may vary or fluctuate depending on the type of application, and in order to deal with the same problem, it is necessary to consider the use coefficient to achieve equivalent load or design power. Therefore, equivalent load = actual load x service factor mechanical rated value and service factor mechanical rated value to measure capacity in terms of life and/or strength, assuming continuous operation for 10 hours per day under uniform load conditions. If the equipment runs more than 10 hours a day, it is necessary to select the mechanical service factor according to the type of the original motor, the number of hours of operation per day, the type of application connected to the equipment, and its load characteristics to ensure the appropriate gear life. The catalog rated value of the selected equipment should be at least equal to or greater than half of the maximum overload reached during its operation. By comparing the actual transmission load with the catalog rated value, the service life of the gearbox can be determined. The following steps are taken to select the appropriate gearbox:
- Calculate the required ratio;
- Calculate the design power based on load type, operating time, and service factor;
- Calculate the output torque;
- በመረጃው መሰረት መሳሪያውን ይምረጡ.
Common Problems with Worm Reducer
| ችግር | ምክንያት | መፍትሄ |
|---|---|---|
| ከመጠን በላይ ማሞቅ | 1. Loss of oil or insufficient oil | 1. Replenish or replace the oil |
| 2. High ambient temperature | 2. Reduce the ambient temperature | |
| ጫጫታ | 1. Poor meshing of gears | 1. Adjust the meshing of gears |
| 2. Worn gears | 2. Replace the worn gears | |
| ንዝረት | 1. Improper installation | 1. Reinstall correctly |
| 2. Uneven load distribution | 2. Adjust the load distribution | |
| የነዳጅ መፍሰስ | 1. Damaged oil seal ring | 1. Replace the damaged oil seal ring |
| 2. Overfilled oil | 2. Drain the excess oil | |
| Not Working | 1. Motor failure | 1. Replace the motor |
| 2. Gear failure | 2. Replace the gear |
Fenner Worm Gearbox መተካት
Our company provides the replacement of Fenner worm gearboxes, which has the following advantages:
- ተወዳዳሪ ዋጋ
- ከፍተኛ ጥራት ያለው ምርት
- በተለያዩ ኢንዱስትሪዎች ውስጥ በስፋት ጥቅም ላይ የዋለ
- Customizable based on customer requirements
We only provide replacement parts for original factory parts, not the original factory parts. If you need to purchase original factory parts, please contact the original supplier for purchase.
የመጫኛ ጥንቃቄዎች
The gearbox should be firmly installed to minimize the impact of vibration or overload. Be sure to check if it is aligned and use dowel pins to properly position the gears, preferably in diagonal directions. The use of flexible couplings (gear couplings with rubber liners/flange/tire couplings) is very important for improving the performance of the gearbox. The couplings should be aligned to avoid angular and eccentric misalignment.
ሞተሮች ለትል ማርሽ መቀነሻዎች
Worm gear reducers and electric motors are closely related and are essential components in many industrial applications. Worm gear reducers are designed to reduce the speed of the motor and increase torque output. Electric motors provide the power needed to drive the worm gear reducer. Our company also provides a wide range of electric motors for sale to meet customer needs.
ስለ Ever-Power
We are a comprehensive transmission equipment manufacturer integrating research and development, manufacturing, and sales of speed reducers. With over 15 years of experience in the design, production, manufacture, and sales of gearboxes, we serve customers in Europe, America, Africa, Asia, etc., and have won the praise of the market. Our company has introduced advanced production equipment and testing equipment at home and abroad, employing industry professionals and technicians to carry out innovative research and development and manufacturing, using standardized production management methods to strictly control every aspect of the production of reducers. Over the years, we have been providing customers with high-quality, high-energy-efficiency, and high-stability production. Our gearboxes are widely used in various industries, such as the equipment industry, food industry, car washing industry, packaging industry, transmission industry, automation industry, solar energy industry, and so on.
We encourage customers to explore our products and contact us for purchases. If you have any questions, please feel free to contact us.
ጥያቄ እና መልስ
Q: What is the service life of Worm Reducer-Replacement of Fenner FU Type Worm Gearbox FU287?
A: Under the temperature limit of 90??C, the lowest gear life of all gearboxes under full load is 20,000 hours.
Q: What should I do if the gearbox overheats?
A: If the gearbox overheats, replenish or replace the oil, and reduce the ambient temperature to solve the problem.
ጥ: ከድርጅትዎ ኦሪጅናል የፋብሪካ ክፍሎችን መግዛት እችላለሁ?
A: No, we only provide replacement parts for original factory parts. If you need to purchase original factory parts, please contact the original supplier for purchase.