የፕላስቲክ ቤቭል ጊርስ

Plastic bevel gear is a type of gear mainly made of plastic material, with its teeth cut into bevel or bevel angles. It is used in various mechanical systems to transmit power and torque between intersecting axes at right angles.

መግለጫ

Dimension:Φ12
Module: M0.25
Material Type: Plastic, POM, Nylon…as customer required

የምርት ዝርዝር

የምርት ባህሪያት

●The teeth on bevel gears can be straight, spiral, or hypoid. Straight bevel gear teeth have the same problem as straight spur gear teeth -- as each tooth engages, it impacts the corresponding tooth all at once.

●Just like with spur gears, the solution to this problem is to curve the gear teeth. These spiral teeth engage like helical teeth: the contact starts at one end of the gear and progressively spreads across the whole tooth.

●Offers ODM & OEM services.

●Design Flexibility: Plastic bevel gears offer greater design flexibility compared to metal gears. Plastic materials can be molded into complex shapes, allowing for custom gear designs to meet specific application requirements.

●Electrical Insulation: Plastic gears provide electrical insulation, making them suitable for use in applications where electrical isolation between shafts is necessary. This property is particularly advantageous in industries such as electronics and robotics.

●Reduced Wear on Other Components: Plastic gears are generally softer than metal gears, resulting in reduced wear on mating components. This can extend the service life of other mechanical parts in the system, such as bearings or shafts.

●Non-Magnetic: Plastic bevel gears are non-magnetic, which is beneficial in applications where magnetic interference or attraction is a concern, such as in medical equipment or sensitive electronic devices.

Application Scenarios of Plastic Bevel Gears:

1. Consumer Electronics: Plastic bevel gears are commonly used in various consumer electronic devices, such as printers, scanners, and household appliances. They are often found in mechanisms that require compact size, low noise, and lightweight components.

2. Automotive Industry: Plastic bevel gears find applications in automotive systems where weight reduction and noise reduction are important considerations. They can be used in power window mechanisms, seat adjustment systems, and HVAC (Heating, Ventilation, and Air Conditioning) actuators.

3. Robotics: Plastic bevel gears are utilized in robotic systems for transmitting motion and torque between joints and actuators. Their lightweight nature and low noise characteristics make them suitable for use in robotic arms, grippers, and other robotic mechanisms.

4. Medical Equipment: Plastic bevel gears are used in various medical devices and equipment, including imaging systems, surgical instruments, and diagnostic equipment. Their non-magnetic properties, corrosion resistance, and lightweight nature are advantageous in medical applications.

5. Industrial Machinery: Plastic bevel gears can be found in various industrial machinery applications, such as conveyor systems, packaging equipment, and material handling systems. They provide cost-effective and low-noise solutions for transmitting power in these systems.

6. Aerospace and Defense: Plastic bevel gears are employed in certain aerospace and defense applications where weight reduction, corrosion resistance, and low noise are critical factors. They can be used in control systems, actuators, and other mechanisms within aircraft and military equipment.

7. Renewable Energy: Plastic bevel gears are utilized in wind turbines and solar tracking systems. Their lightweight construction and corrosion resistance make them suitable for withstanding environmental conditions and transmitting power efficiently in renewable energy applications.

8. Marine and Watercraft: Plastic bevel gears are employed in marine and watercraft applications, where they can be used in steering systems, throttle controls, and other mechanisms. Their corrosion resistance and ability to operate in wet environments make them suitable for marine applications.

How to select the right plastic bevel gear?

1. Load Capacity: Evaluate the maximum torque and load requirements of the application. Choose a plastic bevel gear that can handle the anticipated loads without experiencing excessive wear or deformation. Consider factors such as material strength, tooth profile, and gear geometry to ensure sufficient load capacity.

2. Material Selection: Select a plastic material that is suitable for the specific operating conditions of the application. Consider factors such as temperature range, chemical exposure, and environmental conditions. Common plastic materials used for bevel gears include acetal (POM), nylon, and polyethylene. Each material has its own properties and limitations, so choose one that meets the requirements of your application.

3. Gear Ratio: Determine the desired gear ratio based on the speed and torque requirements of the system. The gear ratio will affect the rotational speed and torque output of the driven shaft. Calculate the required gear ratio to ensure the plastic bevel gear can provide the desired output.

4. Noise and Vibration: Consider the noise and vibration levels that are acceptable for your application. Different plastic materials have varying damping properties, which can affect the noise and vibration characteristics of the gear system. Choose a material and tooth profile that will result in the desired noise and vibration levels.

5. Lubrication: Determine whether the application requires lubrication or if the plastic bevel gear should be self-lubricating. Some plastic materials have inherent lubricity or can be impregnated with lubricants to reduce friction and wear. Consider the lubrication requirements and choose a gear that aligns with those needs.

6. Size and Mounting: Consider the available space and mounting requirements of the application. Ensure that the selected plastic bevel gear can fit within the designated space and can be properly mounted or integrated into the system.

7. Cost: Assess the cost-effectiveness of the plastic bevel gear. Compare the performance and durability of different options with their respective costs to determine the best value for your application. Consider the long-term maintenance costs and potential for gear replacement.

8. Quality and Reliability: Choose a reputable supplier or manufacturer that provides high-quality plastic bevel gears. Ensure that the gears meet industry standards and undergo proper quality control processes to ensure reliability and longevity.

ስለ ኤቨር ሃይል

ምርቶቻችን እንደ ስፔን፣ ኔዘርላንድስ፣ ዩናይትድ ስቴትስ፣ ደቡብ ኮሪያ፣ ቱርክ እና ሩሲያ ላሉ የተለያዩ አገሮች ይላካሉ። በተመሳሳይ ጊዜ ደንበኞች አዳዲስ ምርቶችን እንዲያዘጋጁ እና የቴክኒክ እና የጥራት ችግሮችን እንዲፈቱ ለመርዳት ከልብ ተስፋ እናደርጋለን። ከፍተኛ ጥራት ያላቸውን ምርቶች፣ ፍትሃዊ ዋጋዎችን እና ፍጹም አገልግሎቶችን በመጠቀም የተጠቃሚዎችን ፍላጎት ለማሟላት ፈቃደኞች ነን። በአጭሩ፣ በመጀመሪያ የጥራት መርሆዎችን፣ በወቅቱ የማድረስ እና የብድር መርሆዎችን እንከተላለን፣ እያንዳንዱን የንግድ አጋር በቅንነት እንይዛለን፣ እና ከንግድ ማህበረሰብ የመጡ ጓደኞችን ከእኛ ጋር በመተባበር አብረን ለማልማት እና ብሩህነትን ለመፍጠር በሙሉ ልባችን እንቀበላለን። በተጨማሪም፣ EVER POWER እንደ Worm Gear፣ Spiral Bevel Gear፣ Helical Gear፣ Spur Gear፣ የፕላስቲክ Gear፣ Metric Gear Rack፣ ወዘተ ያሉ ሌሎች የማርሽ ምርቶችን ያቀርባል። ደንበኞች ስለተበጁ ምርቶች ለመጠየቅ እንኳን ደህና መጡ። EVER POWER በቻይና ውስጥ የማርሽ ባለሙያ አምራች ነው። ምርቶቹ በዋናነት እንደ የሀገር ውስጥ ብረት የሚጠቀለል ወፍጮዎች፣ የመርከብ ማደያዎች፣ የትክክለኛነት ማሽን መሣሪያ ፋብሪካዎች፣ የአውቶሜሽን ማሽነሪ ፋብሪካዎች እና የተለያዩ የስርጭት ኩባንያዎች ላሉ በመቶዎች ለሚቆጠሩ ቋሚ አቅራቢዎች ይሸጣሉ፣ እና ወደ ምዕራብ አውሮፓ፣ መካከለኛው ምስራቅ እና ደቡብ ምስራቅ እስያ እና ሌሎች አገሮች እና ክልሎች ይላካሉ። በማደግ ላይ ያለው ኤቨር ፓወር በአሁኑ ጊዜ በርካታ መሐንዲሶችን ጨምሮ በመቶዎች የሚቆጠሩ ሰራተኞች አሉት፣ 20 ሚሊዮን ዩዋን ቋሚ ንብረቶች እና 50 ሚሊዮን ዩዋን ዓመታዊ የውጤት ዋጋ አላቸው። ኩባንያው እንደ ኦፕቲካል ፕሮጀክተሮች እና 16 ሙሉ ሂደት የምርት ክትትል ስርዓቶች ያሉ ተከታታይ የትክክለኛነት መለኪያ መሳሪያዎችን ያካተተ የተሟላ የጥራት አስተዳደር ስርዓቶች አሉት። ኤቨር ፓወር በተመሳሳይ ኢንዱስትሪ ውስጥ ከፍተኛ ተወዳዳሪነት አለው።

በየጥ