Screw air compressor for Laser cutting – the revolution of laser cutting gas protection
The efficiency of the laser cutting machine will be doubled
- Pressure reached 1.8MPa: laser cutting speed increased by 50%, cutting surface will be smooth without burrs
- Stable and reliable: It adopts the energy-saving CMN’s air-end with large screw low-speed and double-acting opposed compression chamber, and adopts heavy-duty bearings, the equipment runs more reliably and more stably, the whole technical performance improved more than 20%.
- The equipment works in smoothly and the low noise; the double-acting opposed compression chamber construction lead to very lower vibration, it will not invert a standing coin on the machine. With very Silent running, it support field installation and saving the pipeline costs much.
- Oil content << 2PPM: ensuring the laser head is free from contamination and keep it as a long service life.
- We can also supply higher pressure model at 2.5 MPa for laser cutting machines, let your laser cutting machine release the maximum capacity
|Model||Pressure||flow rate||outlet||outlet Oil content||Outlet temperature||G.W.||Overall dimensions|
Remarks: please pay special attention the measured flow rate at 1.8MPa pressure when selecting model.